|
|
Company Name: |
Shenzhen Hong Ye Jie Technology CoLtd |
Contact Person: |
mandy |
City: |
shenzhen |
Country: |
China
|
Local Time: |
|
E-mail: |
Premium
Membership Required (Join Free Today) |
|
Introduction: |
Hong Kong Hong Ye Ltd. was established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.
Our products including 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design,shoe sole mold silicone rubber,silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant , liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, hot stamping silicone roller,etc. These are currently been exported to Southeast Asia, Europe, the America and other 50 countries and regions.
To reach the internationally leading quality standard with competitive price is our permanent pursuit. We aim at supply high quality products to meet customers\' satisfaction. It is our solemn commitment that any of our products with quality problems will be replaced within 3 months after purchase. We offer on-site follow-up service for product demonstration, free customer service to solve technical issues, free mold opening technologies, free technical training on pad printing silicon usage and rubber head making. What you need is what we pursue. We are committed to back you up in producing first class products.
Customers and distributors from around the world are welcomed to negotiate with us for business cooperation. Let\'s join hands and strive for mutual prosperity. Factory location Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Town, Long Gang district, Shenzhen, Guangdong Management Certification: ISO 9000/9001/9004/19011: 2000
|
Business Type: |
Manufacturer |
Areas of
Interest: |
1. Chemicals/Rubber
|
|
|
|
Offers
From This Member (5) |
|
|
|
[Sell] Shoe mold Silicone Rubber |
|
|
HY-218 Shoe mold Silicone Rubber Usages of Shoe mold Silicone Rubber HY-218 shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation. Data sheet of shoe mold silicone rubber Model 218# Appearance white Mixing proportion of curing agent (%) 4-5% Operating time (mins 25 0C ) 30-40 Curing time(hours 25 0C) 6-8 Hardness (A°) 18 Density ( g/cm 3 ) 1.08 Viscosity (mPas -25 0C) 18000 Tensile-strength(kgf /cm2 ) ≥18 Tear-strength (kgf /cm ) ≥8 Elongation-break(%) ≥ 314 Introductions To Shoe mold Silicone Rubber Component A is a kind of white flowing liquid and component B is the curing agent. Take 100g of silicone rubber and add 3-5% curing agent for mixing. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. Then pour the liquid silicone rubber into the mold frame or onto the product to be duplicated. Storage Method and Precautions of Shoe mold Silicone Rubber The product, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the limited time. It can continue to be used in case of neither thickening nor deterioration For further information, please feel free to contact Mandy For further information, please feel free to contact Mandy TEL: 086-755-89948019 FAX: 086-755-89948030 MOBILE 189-3886-1892 Website: www(dot)szrl(dot)net E-MAIL: hyjd((at)szrl.net hyjmandy (at)hotmail(dot)com
|
|
» Chemicals/Rubber |
|
|
|
[Sell] RTV-Molding Silicon rubber |
|
|
RTV-Molding Silicon rubber Detailed Product Description Applications of Silicon rubber for mold making Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture relievo, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Features of Silicon rubber for mold making Silicon rubber for mold making is a kind of white or red flowing liquid with general hardness of 22-50shore A after curing. Molding silicon rubber is a kind of elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good elongation, good tensile and tear strength. Operations of Silicon rubber for mold making If the customer wants to make products and silicone molds in large size, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precise patterns, it should be made of silicon with low hardness. The amount of the curing agent added depends on the actual requirements of the customer. If fast drying and demold is required, more curing agent is needed; contrarily, if slower drying and demold is required, then less curing agent is needed. (Note: our company does not recommend you to add silicon oil into the silicone rubber. If the products require a special soft silicone mold or have fine detailed and complex patterns, 5% - 10% silicon oil could be added to soften the mold for easy demold.) For further information, please feel free to contact Mandy TEL: 086-755-89948019 FAX: 086-755-89948030 MOBILE 189-3886-1892 Website: www(dot)szrl(dot)net E-MAIL: hyjd((at)szrl.net hyjmandy (at)hotmail(dot)com
|
|
» Chemicals/Rubber |
|
|
|
[Sell] E625Addition Molding Silicone rubber |
|
|
HY- E625Addition Molding Silicone rubber Description: HY-E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application. Applications: HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, shoe soles making, seal for electronic components and solar circuit board, trademark decoration. etc. Technique Data: Model HY-E625# Appearance Translucent Mixing Ratio 1:1 Operating time (Mins 25°C) 30 - 50 Curing time (Mins 25°C) 120 - 240 Curing time (Mins 60°C) 20 - 30 Hardness (A°) 25±2 Density ( g/cm 3 ) 1.08 Viscosity (CS) (Part A) 30000 ± 5000 Viscosity (CS) (Part B) 5000 ± 500 Viscosity (CS) (After mixed) 10000 ± 2000 Tensile-strength( kgf /cm2 ) 50± 5 Tear-strength (kgf /cm2 ) 15 ± 2 Elongation-break(%) 500 ± 50 Retractility(%) ≤0.1
OPERRATING INSTRUCTION: 1. Clean your products and brush a layer of release agent (detergent or soap water) on the surface of your product. Note: The model should not have been used to make molds for tin cured silicone rubber before. Otherwise, the addition silicone will not get cured. (Use a new model to test it) 2. Enclose the product (the original model) with four plastic plates or wooden plates. 3. Mixing part A and part B with 1:1 mixing ratio and stir evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused) 4. Pour the mixture into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold . SHELF LIFE: Twelve (12) months from date of shipment when stored at 24℃ in original unopened packages. For further information, please feel free to contact Mandy TEL: 086-755-89948019 FAX: 086-755-89948030 MOBILE 189-3886-1892 Website: www(dot)szrl(dot)net E-MAIL: hyjd((at)szrl.net hyjmandy (at)hotmail(dot)com
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Silicone Rubber for building decoration Mold |
|
|
Silicone Rubber for building decoration Mold Making (Tin catalyst series) Detailed Product Description Applications of Silicon rubber for decoration mold making Silicon rubber for building decoration molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , gifts crafts industry, a large statue Buddha, furniture relievo, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Features of Silicon rubber for decoration mold making Silicon rubber for building decoration mold making is a kind of white or red flowing liquid with general hardness of 22-50A°after curing. Molding silicon rubber is a kind of elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good elongation, good tensile and tear strength. Operations of Silicon rubber for decoration mold makin If the customer wants to make products and silicone molds in large size, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precise patterns, it should be made of silicon with low hardness. The amount of the curing agent added depends on the actual requirements of the customer. If fast drying and demold is required, more curing agent is needed; contrarily, if slower drying and demold is required, then less curing agent is needed. (Note: our company does not recommend you to add silicon oil into the silicone rubber. If the products require a special soft silicone mold or have fine detailed and complex patterns, 5% - 10% silicon oil could be added to soften the mold for easy demold.) For further information, please feel free to contact Mandy TEL: 086-755-89948019 FAX: 086-755-89948030 MOBILE 189-3886-1892 Website: www(dot)szrl(dot)net E-MAIL: hyjd((at)szrl.net hyjmandy (at)hotmail(dot)com
|
|
» Chemicals/Rubber |
|
|
|
[Sell] Gypsum Decorative Line Silicone Rubber |
|
|
Gypsum Decorative Line Silicone Rubber •Usage: for toy gifts and craftwork gift, products with complex fine details, and made in pouring way. Description:    •HY-638# silicon rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. •It is suitable for small products or fine and precision products which is difficult to demould. •This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2‰. •Applications: poly technique, lightings, candles, and molds in multiple pieces for large products. RTV-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. •Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. •The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds. Operation instruction for RTV-2 molding silicone rubber:    •The product is white or red flowing liquid with general hardness of 22—50A°after curing. •If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. •On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. •The amount of the curing agent depends on the actual requirements of the customer. •If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed. Note: •our company does not recommend you to add silicone oil into the silicone rubber. •If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. The proportions and reactions of the curing agent and the silicon are listed as follows:    •Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be demoulded after 6-8 hours.    •Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and can be demoulded after 2-3 hours.    •Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can be demoulded after 1.5-2 hours. •Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can be demoulded. For further information, please feel free to contact Mandy TEL: 086-755-89948019 FAX: 086-755-89948030 MOBILE 189-3886-1892 Website: www(dot)szrl(dot)net E-MAIL: hyjd((at)szrl.net hyjmandy (at)hotmail(dot)com
|
|
» Chemicals/Rubber |
|
|
|
|
|
Pages: 1
|
|
|
|