|
|
|
|
|
|
|
[Sell]
Trenbolone |
 |
|
Trenbolone
CAS:10161-33-8
Name:Trenbolone
Formula:C18H22O2
Molecular Weight:270.37
Synonyms:
tren,Trenbolone;nortestosterone;Trienbolone;Trenbolone;Nandrolone Decanoate
Density:1.19 g/cm3
Melting Point:170 °C
Boiling Point:490.8 °C at 760 mmHg
Flash Point:208.2 °C
Appearance: yellow crystalline powder
Assay: 99%
Package: foil bag
Storage: Stored and protected from light
Application: Pharmaceutical and biochemical research.
More information,lps contact:
ycgl18 at yccreate dot com |
|
» Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China]  |
|
|
|
|
|
[Sell]
Drostanolone Enanthate |
|
|
Drostanolone Enanthate
name:Drostanolone Enanthate
Drostanolone enanthate, which also may be called Masteril or Masteron,is an anabolic steroid.
Usage:Drostanolone enanthate is used primarily by athletes who need to retain strength while losing mass. It is beneficial to runners and athletes who must remain in a certain weight class.
CAS :472-61-145
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Stanozolol |
|
|
Stanozolol
CAS:10418-03-8
Name:Stanozolol
Formula:C21H32N2O
Molecular Weight:328.49
Deleted CAS:17966-55-1|69353-49-7
Synonyms:
winny,pyrazole;Anabol;Androstanazol;Androstanazolestanazol;Estazol;Stanazolol;Stromba;Strombaject;Tevabolin;Win 14833;Winstrol;
EINECS:233-894-8
Density:1.129 g/cm3
Melting Point:242 °C
Boiling Point:490.8 °C at 760 mmHg
Flash Point:250.7 °C
Appearance:white to light yellow powder
Assay: 99%
Package: 1KG/foil bag
Storage: stored and protected from light
Application: Pharmaceutical raw materials
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Oxymetholone |
|
|
Oxymetholone
CAS Number:434-07-1
Name:Oxymetholone
Formula:C21H32O3
Molecular Weight:332.53
Synonyms:
drol,Anapolon;Anasteron;Anasteronal;Anasterone;Becorel;Nastenon;Oxymethenolone;Pardroyd;Plenastril;Protanabol;Roboral;Synasteron;Synasteron 50;fiberdrum or foil bag
EINECS:207-098-6
Density:1.169 g/cm3
Melting Point:172-180 °C
Boiling Point:465.9 °C at 760 mmHg
Flash Point:249.7 °C
Solubility:<0.1 g/100 mL at 23 °C
Appearance:white crystalline powder
Assay: 99%
Package: packaged in foil bags or tins
Application: material, Steroid hormone, Anabolin. make your body strong
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Testosterone Mixed sus |
|
|
Testosterone Mixed sus
Package: 1kg/aluminum foil bag
Main ingredients: Testosterone Propionate, Testosterone Phenylpropionate, Testosterone, Testosterone decanoate.
One kilogram of mixed testosterone scale: Testosterone Propionate 120 grams, Testosterone Phenylpropionate 240 grams, Testosterone 240 grams,Testosterone decanoate 400 grams.
USES: it is a new type of hormonal premix drugs, it is different pharmacological effects of the time a mixture. Offsetting the drugs work by time, make the drugs can faster and more lasting effect.
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Testosterone cypionate |
|
|
Testosterone cypionate
CAS:58-20-8
Name:Testosterone cypionate
Formula:C27H40O3
Molecular Weight:412.61
Synonyms:
Testosterone,Cyclopentanepropionic acid, ester withtestosterone (8CI);Depotest;Depovirin;Pertestis;Testodrinprolongatum;Testosterone cypionate;Testosterone
EINECS:200-368-4
Density:1.1 g/cm3
Boiling Point:525.9 °C at 760 mmHg
Flash Point:223.9 °C
Appearance:white to off-white crystalline powder
Assay: above 98%
Package: according to your requirement
Storage: room temperature
Usage: API and intermediates
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Boldenone undecylenate |
|
|
Boldenone undecylenate
CAS:13103-34-9
Name:Boldenone undecylenate
Formula:C30H44O3
Molecular Weight:452.67
Synonyms:
equipoise Boldefarm;Boldenone 10-undecenoate;Equipoise;Parenabol;Vebonol;
EINECS:236-024-5
Density:1.05 g/cm3
Boiling Point:553.2 °C at 760 mmHg
Flash Point:232.2 °C
Appearance:Light yellow oily matter
Assay: >99.1%
Package: Plastic bottle
Storage: Room temperature
Usage: Anabolic Steriod
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Taldenafil |
|
|
Taldenafil
Cialis
CAS:171596-29-5
Name:Cialis
Formula:C22H19N3O4
Molecular Weight:389.40
Synonyms:
Pyrazino,Taldenafil;4-dione;Adcirca
Density:1.51 g/cm3
Melting Point:298-300 °C
Boiling Point:679.1 °C at 760 mmHg
Flash Point:364.5 °C
Appearance:white to off-white cyrstalline solid
Assay: 99%
Package: packaged in foil bags or tins
Storage: in dark and cold place
Usage: Used for the treatment of erectile dysfunction. A phosphodiesterase 5 inhibitor
More information,lps contact:
ycgl18 at yccreate dot com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Nandrolone decanoate |
|
|
Nandrolone decanoate
CAS:360-70-3
Name:Nandrolone decanoate
Formula:C28H44O3
Molecular Weight:428.72
Synonyms:
Deca decanoate (6CI,7CI,8CI);Decanoic acid,Anabolicum;Anabolin Forte;Decanofort;Extraboline;Hybolin decanoate;Nandrobolic LA;Norandrostenolone decanoate;Retabolil
EINECS:206-639-3
Density:1.04 g/cm3
Melting Point:33-37 °C
Boiling Point:537.2 °C at 760 mmHg
Flash Point:226.8 °C
Appearance:white to light yellow powder
Assay: 99.0%
Package: AL bag
Storage: Ventilation low temperature drying
Application: for Protein deficiency
zhouqin01@yccreate.com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Testosterone propionate |
|
|
Testosterone propionate
CAS:57-85-2
Name:Testosterone propionate
Formula:C22H32O3
Molecular Weight:344.49
Synonyms:
Testosterone,propionate (8CI);Agovirin;Androlon;Bio-testiculina;Enarmon;Enarmon-oil;Homandren;Hormoteston;Masenate;Nasdol;Orchisterone;Orchistin;Oreton;Pantestin;Primotestone;Propiokan;Sterandryl;Synerone;TP;Telipex;Testaform;Testex;Testonique;Testosid;Testrex;Testosterone Propionate;
EINECS:200-351-1
Density:1.1 g/cm3
Melting Point:118-123 °C
Boiling Point:454.6 °C at 760 mmHg
Flash Point:196.3 °C
Solubility:<0.1 g/100 mL at 24.5 °C in water
Appearance:white or yellowish-white crystals or a white or creamy-white crystalline powder
Assay: 99%
Package: 1KG/aluminum bags
Application: synthetic androgen, its action with testosterone, and stronger
contact:ycgl18@yccreate.com |
|
| » Posted by: Wuhan Steroidschem Pharmaceutical Co.,Ltd [China] |
|
|
|
|
|
[Sell]
HY301 Epoxy Resin |
|
|
HY301 Epoxy Resin
Description
HY301# epoxy resin is the most widely and largest quantity needed ,It is used by two components, resin and curing agent, with the mix ratio of 2: 1 ( Resin : curing agent 2: = 1) . Particularly suitable for the Insulation of mica material, epoxy glass steel insulating board and the reinforcing material. Because of its moderate viscosity, It is particularly suitable as a glass steel anti-corrosion lining material hand lay up method, such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion. HY301 epoxy resin is suitable for the preparation of solvent free or less solvent coating, strong anti-corrosion ability , small environmental pollution.
Application
It is particularly suitable as a glass steel anti-corrosion lining material , such as for : large cement tank, storage tank, tank iron requirements of anti-corrosion. With room temperature curing agent , easy Operation by hand, and the glass cloth firmly stuck in the lining material surface, the formation of epoxy glass steel anti-corrosion layer. So it is widely used in chemical factory,winery, sewage treatment device corrosion occasion.
Technical Parameters
Mixing Ratio Resin : Curing Agent = 2: 1
Color A: Light Yellow B: White
Appearance no visible mechanical impurity / liquid Form
Epoxied Value (eq/100g) 0.41—0.47
Hydroponically Chlorine (eq/100g) 0.03
Hydrolysis Chlorine (eq/100g) 0.014
Volatile (%) ≤1
Softening Point (℃) 12--20
Characteristics
1. Moderate viscosity
2. Strong corrosion resistance
3. The construction of small environmental pollution
4. Manual operation
Operation instructions
1. Clean the Surface of your products, make it clean and dry,
2: evenly mixing the resin and cure agent at ratio of 2:1,
3 Brush the mixed resin on the surface of your products evenly , and then put a layer of Fiberglass , then brush a layer of resin , then repeat the ways above.
Warm Tips
1 It is forbidden to pour back the material into the Original packages even it is unused ;
2 construction to be dry and well ventilated space, Far away from the fire source;
3 stored in a cool dry place,Far away from light , and close the packages well .
4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary
Package
20KG/drum package
220KG/drum package
Shelf life
Six (6) months when stored under dry and cool place by original package under 25℃
For more information, pls feel free to contact Ms. Jules
Tel: +86-0755-89948030
Mob: +86-18948315840
Skype: wy05146125
Email: hyjwy at szrl dot net
|
|
| » Posted by: www.szrl.net [China] |
|
|
|
|
|
[Sell]
HY103# Unsaturated Resin |
|
|
HY103# Unsaturated Resin
Description
HY103# with high hardness, not easy to be broken, suitable for the production of many crystal crafts production
Application
Suitable for production of crystal lamp, candle holder, crystal crafts, crystal gifts, crystal trophy,crystal vase, crystal model building mode, crystal perfume bottles, crystal ashtray, crystal vase, hotel supplies, crystal stationery cards Taiwan, crystal ball, crystal key button, crystal animal, flower and so on transparent products.
Technical Parameters
Mix Ratio
Color
Appearance High Transparent liquid material
Acid Number( AN) (koh/g) 15-21
Viscosity 25℃ 350-600
Ration of Solid (%) 65-70
Gel Time (25℃) 9-15
Water Absorption ( 24H) 0.05%
Characteristics
*Not easy to be broken
*High Hardness
Operation Ways
1, First, take a mount of resin, then add 0.5% - 1% cobalt ( Thixtropic ) ,and stirring evenly;
2, Then add 0.8%-1.5% catalyst according to the amount of the resin and stirring evenly;
3, For the cure time is closely to the environmental temperature and humidity , so pls adjust the mix ratio of the catalyst and thixotropic
4The gel time of about 9-15 minutes at room temperature of 25C.
Warm Tips
1., It is belong to flammable items, pls avoid fire, and child contact, If contact with skin , pls wash by clean water and go to a doctor.
2, Don’t add the Thixotropic and cure agent at the same time , Otherwise , it will be explosion and fired, 3. The catalyst and the Thixotropic must be isolated storage
Package
Resin : 220KG/Iron drum package
Thixotropic : 25kgs per Plastic Drum
Cure Agent : 25kgs per Plastic Drum
Shelf life
Under the temperature of 25℃ storage for a period of three to six months
For more information, pls feel free to contact Ms. Jules
Tel: +86-0755-89948030
Mob: +86-18948315840
Skype: wy05146125
Email: hyjwy at szrl dot net
|
|
| » Posted by: www.szrl.net [China] |
|
|
|
|
|
[Sell]
HY302# Epoxy Resin |
|
|
HY302# Epoxy Resin
Description
HY302# epoxy resin is composed of two components, resin and curing agent, with mix ratio of 4: 1 ( Resin : Cure Agent = 4: 1 ) , suitable for and amine curing agents or their additive , It can be cured at room temperature and heated Cured.
Application
Widely used in Painting such as for floor, coating ect , It can also used for electronic potting , such as
power transformer, reactor, CCL, insulating paint, electrical appliances and laminated products and other fields.
Technical Parameters
Mix Ratio Resin : Cure Agent = 4: 1
Color A: Light Yellow B: White
Appearance no visible mechanical impurity / liquid Form
Epoxied Value (eq/100g) 0.48—0.54
Hydroponically Chlorine (eq/100g) ≤300
Weight Per Epoxy Equivalent (WPE) (g/eq) 185-210
Viscosity(mPa.S) 10000-11000
Volatile (%) ≤1.8
Characteristics
*Strong adhesion
*Good chemical corrosion resistance
*Thermal stability and electrical insulation.
* high toughness
*Low Shrinkage
Operation instructions
1. Clean the surface of your products , make it clean and dry
2: evenly mixing the seasoning ratio A:B=4:1
3 Introduction resin mixing evenly to the electronic equipment inside, so that it can be estimated
Warm Tips :
1 It is forbidden to pour back the material into the Original packages even it is unused ;
2 construction to be dry and well ventilated space, Far away from the fire source;
3 stored in a cool dry place,Far away from light , and close the packages well .
4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary
Package
20KG/drum package
220KG/drum package
Shelf Life
Six (6) months when stored under dry and cool place by original package under 25℃
For more information, pls feel free to contact Ms. Jules
Tel: +86-0755-89948030
Mob: +86-18948315840
Skype: wy05146125
Email: hyjwy at szrl dot net
|
|
| » Posted by: www.szrl.net [China] |
|
|
|
|
|
[Sell]
BMZ020#Non-Alkali Glass fiber surface mat |
|
|
Description
Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (S-SM)and hand lay-type series (S-HM)
Characteristic
Fiber distribution evenly, finished products with smooth surface, corrosion resistance, low binder content, volt mode is good
Application
Wound glass fiber mat is mainly applied to the surface of the pipe and tank wrap products, it can improve product surface corrosion resistance and enhanced compressive strength, anti-leakage and prolong life.
Hand lay glass surface mat is mainly used for hand lay products with complex geometric curve, its volt mode is good, resin penetration speed, can improve the strength and corrosion products.
Datasheet
Product name Alkaline or not gram weight
(g/m2) breadth（mm)
BMZ020# Not Alkali 20 20-2000
Shelf life
12-24 months under the room temperature of 25C
Contact: Jasmine Email: hyjcchuan(at)szrl(dot)net Skype: Jasminechanszrl
Tel:0086-18938867607
|
|
| » Posted by: zhongguo hongyejie co.ltd [China] |
|
|
|
|
|
[Sell]
WFB200# Glass Fiber Cloth |
|
|
Description
Glass Fiber cloth is compiled by untwisted direct roving with plain weave, is mainly for unsaturated polyester resins , vinyl resins , epoxy and phenolic resins , etc.
Application
Widely used for hand laying fiberglass products : such as the hull , automobile, airplane , plates, sports and entertainment facilities , fiberglass products, sanitary ware, pipe irrigation , cooling towers and so on.
Technical Parameters
Model Code WFB200
Concluding alkali or not No
Weight(g/m2) 200
Width(mm) 500-3300
Characteristics
＊Less Hairy
＊High penetration speed
＊Uniform thickness
＊High mechanical strength
Warm tips :
1,General conventional glass fiber filaments is 9-13 microns in diameter , glass fiber below 6 micron belongs to floats , can be sucked directly into the lungs, can cause respiratory disease, so you should pay special attention to six microns or less glass fiber cloth, is generally imported. The one who is under professional production operations must wear masks. If contact frequently, may be bothered into the lungs, causing pneumoconiosis .
2, if it is physically touch the glass fiber, people with allergic skin will occur allergic itching, however, generally speaking, it is not serious. It will occur small rash on allergic skin, please take some anti allergy medicine
3, if it is stick on clothes and difficult to remove, just pat it under wind for several times or clean & dry it
Package
Each volume sets wrap a transparent plastic bag , then put into cartons. If you have special packaging requirements , we can offer in accordance with customer requirements. 1x20 foot container can pack about 10 tons
Contact: Jasmine Email: hyjcchuan(at)szrl(dot)net Skype: Jasminechanszrl
Tel:0086-18938867607
|
|
| » Posted by: zhongguo hongyejie co.ltd [China] |
|
|
|
|
|
[Sell]
HY103# Unsaturated Resin |
|
|
Description
HY103# with high hardness, not easy to be broken, suitable for the production of many crystal crafts production
Application
Suitable for production of crystal lamp, candle holder, crystal crafts, crystal gifts, crystal trophy,crystal vase, crystal model building mode, crystal perfume bottles, crystal ashtray, crystal vase, hotel supplies, crystal stationery cards Taiwan, crystal ball, crystal key button, crystal animal, flower and so on transparent products.
Technical Parameters
Mix Ratio
Color
Appearance High Transparent liquid material
Acid Number( AN) 15-21
Viscosity 350-600
（%）ration of Solid 65-70
Gel time 9-15
water absorption ( 24H) 0.05%
Characteristics
＊Not easy to be broken
＊High Hardness
Operation Ways
1, First, take a mount of resin, then add 0.5% - 1% cobalt ( Thixtropic ) ,and stirring evenly;
2, Then add 0.8%-1.5% catalyst according to the amount of the resin and stirring evenly;
3, For the cure time is closely to the environmental temperature and humidity , so pls adjust the mix ratio of the catalyst and thixotropic
4The gel time of about 9-15 minutes at room temperature of 25C.
Warm tips :
1., It is belong to flammable items, pls avoid fire, and child contact, If contact with skin , pls wash by clean water and go to a doctor.
2, Don’t add the Thixotropic and cure agent at the same time , Otherwise , it will be eexplosion and fired, 3. The catalyst and the Thixotropic must be isolated storage
Package
Resin : 220KG/Iron drum package
Thixotropic : 25kgs per Plastic Drum
Cure Agent : 25kgs per Plastic Drum
Shelf life
Under the temperature of 25℃ storage for a period of three to six months
Contact: Jasmine Email: hyjcchuan(at)szrl(dot)net Skype: Jasminechanszrl
Tel:0086-18938867607
|
|
| » Posted by: zhongguo hongyejie co.ltd [China] |
|
|
|
|
|
[Sell]
JA205# Foam PU Resin |
|
|
Description
JA205# foaming resin is a new organic polymer material, Commonly known as the black material and white material, also known as PU material, foam material, combination of materials, black oil and butter. An independent closed-cell structure of the polyurethane rigid foam will be appeared by mix the part A and Part B evenly at ratio of 1: 1 . because of its superior performance ,It is widely used in many fields .
Application
Mainly used for the Insulation material for : refrigerators, freezers, solar energy, high temperature chamber and other electrical companies, cold storage, refrigerated trucks industry, construction, pipe insulation industry, telecommunications, shipbuilding, wood furniture, handicrafts, packaging and other fields. Products are also applications involving light industry, chemical industry, electronics, textiles, medical, construction, building materials, automotive, defense, aerospace, aviation, etc., such as: fishing rod handles, drinking fountains coolers, automotive portable electronic refrigerator, mug, electricity water heaters, general equipment insulation sheet, and so on.
Technical Parameters
Code Mix Ratio Color Flash Point Viscosity（25℃cps ） Froth time Demould Time（60℃）
JA205# A:B=1:1 A：Black ≥200 170～3000 1-2min 5-6min
B：White 150-300
Characteristics
＊An Low density, high strength,
＊good thermal insulation properties,
＊good thermal insulation properties,
＊non-absorbent,
＊quick and easy construction and other excellent characteristics,
＊acid and alkali resistance, aging resistance,
＊excellent production and processing performance characteristics.
＊heat insulation, sound insulation
＊capacity of light, high-strength, , fire-retardant
Operation instructions
1 Clean the mold surface and coated with a layer of release agent,
2 Mix the part A and Part B at ratio 1: 1 (black material: white material = 1: 1 ) For hard spots, add more black material) Then mixing evenly, poured into the mold.
3.1-2 minutes to start foaming reaction can be stripping out 5-6 minutes (60 ℃) after.
Warm tips :
1 It is forbidden to pour back the material into the Original packages even it is unused ;
2 construction to be dry and well ventilated space, Far away from the fire source;
3 stored in a cool dry place,Far away from light , and close the packages well .
4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary
Package
25KG/drum package for part A + 25KG/drum packages for part B
200KG/drum packing for part A +200KG/drum packing for part B
Shelf life
Six (6) months when stored under dry and cool place by original package under 25℃
Contact: Jasmine Email: hyjcchuan(at)szrl(dot)net Skype: Jasminechanszrl
Tel:0086-18938867607
|
|
| » Posted by: zhongguo hongyejie co.ltd [China] |
|
|
|
|
|
[Sell]
HY302#Epoxy Resin |
|
|
Description
HY302# epoxy resin is composed of two components, resin and curing agent, with mix ratio of 4: 1 ( Resin : Cure Agent = 4: 1 ) , suitable for and amine curing agents or their additive , It can be cured at room temperature and heated Cured.
Application
Widely used in Painting such as for floor, coating ect , It can also used for electronic potting , such as
power transformer, reactor, CCL, insulating paint, electrical appliances and laminated products and other fields.
Technical Parameters
Mix Ratio 4: 1
Color A: 、B:
Appearance
no visible mechanical impurity / liquid Form
(eq/100g)Epoxide Value 0.48—0.54
(eq/100g)Unhydrolytic Chlorine ≤300
weight per epoxy equivalent (WPE)(g/eq) 185-210
Viscostiy（mPa.S） 10000-11000
(%) Volatile ≤1.8
Colour ≤3
(℃) Softening Point
Characteristics
＊Strong adhesion
＊Good chemical corrosion resistance
＊Thermal stability and electrical insulation.
＊ high toughness
＊Low Shrinkage
Operation instructions
1. Clean the surface of your products , make it clean and dry
2: evenly mixing the seasoning ratio A:B=4:1
3 Introduction resin mixing evenly to the electronic equipment inside, so that it can be estimated
Warm tips :
1 It is forbidden to pour back the material into the Original packages even it is unused ;
2 construction to be dry and well ventilated space, Far away from the fire source;
3 stored in a cool dry place,Far away from light , and close the packages well .
4 Don’t contact with skin or eyes , Otherwise clean the skin with alcohol scrub, and wash with plenty of water and go to hospital in necessary
Package
20KG/drum package
220KG/drum package
Shelf life
Six (6) months when stored under dry and cool place by original package under 25℃
Contact: Jasmine Email: hyjcchuan(at)szrl(dot)net Skype: Jasminechanszrl
Tel:0086-18938867607
|
|
| » Posted by: zhongguo hongyejie co.ltd [China] |
|
|
|
|
|
[Sell]
5-Fluorocytosine (5-FC) |
|
|
5-Fluorocytosine (5-FC)
Formula: C4H4FN3O, CAS No.: 2022-85-7. White to pale yellow solid Assay (BY HPLC): 99.0%MIN Usage: 5-Fluorocytosine is a less toxic antifungal agent antagonizes the action of sterol biosynthesis inhibitors
|
|
| » Posted by: Biocaxis chemicals Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Adenosine triphosphate disodium |
|
|
Adenosine triphosphate disodium
We sell pharmaceutical intermediates of adenosine triphosphate disodium. (CAS 987-65-5).
White crystalline powder. HPLC and UV not less than 98%. Please stored in frozen temperature.
You can contact with us if you want to order this product.
|
|
| » Posted by: Biocaxis chemicals Co.,Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 next»
|
|
|
