|
|
|
|
|
|
|
[Sell]
2,3,4,5-Tetrafluorobenzoic acid for sale, hezhongchem1@gmail.com |
 |
|
Product name:
2,3,4,5-Tetrafluorobenzoic acid
CAS No.:
1201-31-6
Appearance:
White to light yellow crystal powder
Assay:
≥98%
Melting Point:
85-87℃
Usage:
As a fluorinated quinolone antibiotics such as ofloxacin and other important intermediates, pesticide preparation, LCD.
Packing:
25kg/ cardboard drum
Benzoic aldehyde derivates: Benzoic aldehyde, Anisic aldehyde, p-Veratric aldehyde, TMBA, Salicylaldehyde, PHBA, m-Hydroxybenzaldehyde, Protocatechualdehyde, o-Nitrobenzaldehyde, m-Nitrobenzaldehyde, p, Nitrobenzaldehyde, 2-Fluorobenzaldehyde, PFAD, p-Trifluoromethylbenzaldehyde, p-Benzyloxybenzaldehyde, o-Bromobenzaldehyde, 2-Cyanobenzaldehyde, Sodium 2-formylbenzenesulfonate, etc.
Benzoic acid derivates: Benzoic acid, DABA, Dinitrobenzoic acid, 4-Amino-3-nitrobenzoic acid, 4-Amino-3-methylbenzoic acid, 3-Methoxysalicylic acid, 3-hydroxyanthranilic acid hydrochloride, 2-Amino-5-iodobenzoic acid, 2-Amino-5-nitrobenzoic acid, 2-Amino-5-bromobenzoic acid, 2-Amino-6-chlorobenzoic acid, 2-Chloro-5-nitrobenzoic acid, 4-Chloro-3-sulfomulbenzoic acid, m-Aminobenzoic acid, p-Aminobenzoic acid, o-Nitrobenzoic acid, o-Bromobenzoic acid, o-Iodobenzoic acid, p-Ethoxybenzoic acid, etc.
Benzoic acid ester derivates: Benzyl benzoate, Ethylparaben, Sodium Ethylparaben, Propylparaben, Butylparaben, Sodium Butylparaben, Sodium methylparaben, Sodium propylparaben, Butyl p-aminobenzoate, Ethyl p-butylaminobenzoate, Ethyl p-dimethylaminobenzoate, Padimate, Octyl p-dimethylaminobenzoate, Methyl p-bromobenzoate, Methyl 4-(bromomethyl)benzoate, Methyl 2-bromobenzoate, Benzoic anhydride, etc.
Benzoic alcohol derivates: Benzyl alcohol, 3 4 5-Trimethoxybenzyl alcohol, 3 5-Dinitrobenzyl alcohol, 4-Mercaptobenzyl alcohol, Benzhydrol, etc.
|
|
» Posted by: Wuhan Hezhong Bio-Chemical Co.,Ltd. [China]  |
|
|
|
|
|
[Sell]
m-Hydroxybenzaldehyde for sale, hezhongchem1@gmail.com |
|
|
Product name:
m-Hydroxybenzaldehyde
Alias:
3-hydroxy benzaldehyde; 3-Hydroxybenzaldehyde
CAS No.:
100-83-4
Molecular formula:
C7H6O2
Molecular weight:
122.12
Structural formula:
Appearance:
Colorless to yellow crystalline powder
Assay:
≥99%
Melting Point:
101-105℃
Boiling Point:
191℃
Usage:
As intermediates, mainly for the manufacture of medicines, spices, dyes, can also be used for sterilization, photographic emulsion agent, such as nickel plating brightener, hydroxybenzaldehyde synthesis of drugs there are removal of hydroxy-adrenal system, epinephrine hydrochloride ropivacaine or her, quinine, Russian, and so on.
Packing:
25kg/ cardboardl drum
Storage:
Store cool, dry and ventilated
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
m-Nitrobenzaldehyde for sale, hezhongchem1@gmail.com |
|
|
Product name:
m-Nitrobenzaldehyde
Alias:
3-Nitrobenzaldehyde; 3-nitro benzaldehyde
CAS No.:
99-61-6
Molecular formula:
C7H5O3
Molecular weight:
151.12
Structural formula:
Appearance:
Yellowish crystalline powder
Assay:
≥99%
Melting Point:
56-58℃
Usage:
Used as medicines, dyes, surfactants in organic synthesis intermediates. In the pharmaceutical industry for the synthesis of calcium iodide Pratt, iopanoic acid, tartaric acid hydroxylamine salts, Nimodipine, nicardipine, nitrendipine, Niludipine etc.
Packing:
25kg/ cardboardl drum
Storage:
Store cool, dry and ventilated
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
p-Hydroxybenzaldehyde for sale, hezhongchem1@gmail.com |
|
|
Product name:
PHBA
Alias:
4-Hydroxybenzaldehyde; p-Hydroxybenzaldehyde; p-hydroxy benzaldehyde
CAS No.:
123-08-0
Molecular formula:
C7H6O2
Molecular weight:
122.12
Structural formula:
Appearance:
Yellow to light brown crystalline powder
Assay:
≥99.5%
Density:
1.125~1.129g/cm3( (25℃)
Melting Point:
112-116℃
Boiling Point:
191℃
FEMA
3984
Usage:
Used as important intermediates for pharmaceutical, perfumery, pesticides, used in synthesis of hydroxy-ampicillin, trimethoprim benzyl amino pyrimidine, three methoxy benzaldehyde drugs
Packing:
25kg/ cardboardl drum
Storage:
Store cool, dry and ventilated
|
|
| » Posted by: Wuhan Hezhong Bio-Chemical Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Stainless Steel Baking Rack And Cooling Racks |
|
|
Stainless steel baking racks are also called cooling racks because they are designed to help baked goods cool quickly and evenly. When freshly baked items are placed on a cooling rack, the items are allowed to cool evenly because the steam and heat are able to escape from all areas of the item, unlike when items are left to cool in the pan they were baked in.
Most wire baking racks are rectangular in shape but round baking racks are available. While traditional baking racks are made of metal, racks made of wood or other heat resistant materials like chrome plated steel can be purchased from specialty baking stores.
Characteristics: Heat resisting ,Stand fire, fixed shape, corrosion-resistance, nonpoisonous and tasteless. Runheng can offer the barbecue grill wire mesh in the shapes of circle, square, curve, etc.
Barbecue Grill is mostly used in roasting of meat, fish, wheat flour food in the outdoors. It's easy to take for camp and travel.
|
|
| » Posted by: Runheng Barbecue Grill Mesh Factory [China] |
|
|
|
|
|
[Sell]
ammonium chloride |
|
|
Ammonium chloride can be made by the chemical reaction , that is NH3+ HCI=NH4CI, which can get the cubic crystal or white powder, and that is the rudiment of ammonium chloride
Basic info:
CAS No.: 12125-02-9
MF: NH4CL
EINECS No. : 235-186-4
Place of Origin : Hunan, China (Mainland)
Mesh size : 20~60
Type : Enzyme Preparations, Nutrition Enhancers
Brand Name : JIANGHAI
Color : white
Synonym: Ammonium Chloride, Ammonium Chloratum; Ammonium Chloridum; ammonia chloride; sal ammoniac
Solubility : freely soluble in water,sparingly soluble in ethanol(95%),have very good free flowing. The best one supplier whom have the best internal quality. which the content pass seven different international testing standard.
Heavy metals : not more than 10 parts per million
Min. Order Quantity : 20 Tons
Delivery Port : wuhan/shanghai
Payment Terms : T/T
Production Capacity: 30,000 Tons / Year
Packaging Details: PVC/ kraft paper 25kg/50kg bag with PE liner or demand as customers,one 20 's container hold 20TONS with pallet, 24TONS without pallet.
Delivery Time : within 10days after getting advance payment
Handling and Storage:
1. Store in a cool, dry, ventilated house away from moisture.
2. Avoid handling or transporting together with acidic or alkaline substances.
3. Prevent the material from rain and insolation. Load and unload carefully and protect from package damage.
4. In the event of a fire, use water, soil or Carbon Dioxide Fire Extinguishing Media.
Technical index:
INDEX GB2946-92 RESULT
AMMONIUM CHLORIDE % ≥ (NH4CL) 99.3 99.58
MOISTURE % ≤ 0.7 0.3
RESIDUE ON IGNITION % ≤ 0.4 0.2
HEAVY METAL(Pb) % ≤ 0.0005 0.00045
SULPHATE % ≤ 0.02 0.018
Fe % ≤ 0.001 0.0005
PH value 4-5.8 5.6
Application
Mainly used in industry of dry cell, electroplating, dye and precision casting, currieries, enchants, feed additive ect
HS Code 2827109000
|
|
| » Posted by: ZHUZHOU JIANGHAI ENVIONRMENTAL PROTECTION CO.,LTD [China] |
|
|
|
|
|
[Sell]
Plain PC wire, Materials, Diameter, Standard, Tensile strength, and Other Key Parameter. |
|
|
Plain PC wire named smooth PC wire refers to the smooth surface treatment of steel wire, without ribs, not indented. Plain PC wire has low relaxation and high tensile strength.
Materials: Carbon steel.
Plain PC Wire Diameter: 4 / 4.5 / 4.8 / 5 / 6 / 6.25 / 7 / 8 / 9 / 10mm.
Standard: BS5896 GB/T5223-2002 ASTM A421 ASTM A881/A881M.
Tensile strength: 1570Mpa 1670Mpa 1770Mpa 1860Mpa.
Surface: smooth.
Coil weight: 0.8 to 1.5T. |
|
| » Posted by: Ledning PC Wire Factory [China] |
|
|
|
|
|
[Sell]
Food Additive Carboxymethyl Cellulose |
|
|
| This is one kind of food grade CMC which is exported. Our company year productivity stabilizes between 12000-15000 ton, introduces " the ICP level observation entire spectrum to read plasma launch spectroscope " which German Spiker Company produces.Straight, the production food grade and the technical grade carboxymethylcellulose sodium, best-selling overseas. |
|
| » Posted by: Changzhou City Guoyu Environmental S&T Co., Ltd. [China] |
|
|
|
|
|
[Sell]
PVC,CPVC PALL RING |
|
|
PVC PALL RING is the result of the post chlorination of PVC. The level of chlorine is increased from 56-57%, up to as high as 74%, although typically most commercial CPVC resins contain 63 to 69% chlorine. This increase in chlorine level raises CPVC’s maximum operating temperature to 200°F, over PVC’s maximum operating temperature of 140°F. In terms of chemical resistance, PVC and CPVC are very similar. PVC,CPVC PALL RING, TELLERETTE PACKING is widely used in many chemical towers.
PVC CPVC PALL RING is the result of the post chlorination of PVC. The level of chlorine is increased from 56-57%, up to as high as 74%, although typically most commercial CPVC resins contain 63 to 69% chlorine. This increase in chlorine level raises CPVC’s maximum operating temperature to 200°F, over PVC’s maximum operating temperature of 140°F. In terms of chemical resistance, PVC and CPVC are very similar. PVC,CPVC PALL RING, TELLERETTE PACKING is widely used in many chemical towers. T.C.I Pall ring is Similar to: glitsch,koch glitsch,lanpac and sulzer Pall ring
Plastic materials for the production of packings for towers have recently been used in many application fields in which formerly were restricted to metals and ceramic materials.
Selection of plastic materials depends on chemical resistance, temperature stability and mechanical strength. Polypropylene has good resistance to chemicals at temperatures up to more than 100 deg.C, polypropylene is superior to polyethylene in most fields.
The basic property of Polypropylene PP - Density: 920kg/m3
Types used: Operational temperature range:
Polypropylene LTHA: up to +110 deg.C
Polypropylene glass-fiber reinforced: up to + 140 deg.C
Polypropylene alkali-proof: up to +110 deg.C
Cold-resistant : to -10 deg.C (depending on the type)
Resistant to acids like hydrochloric acid and sulfuric acid bases like caustic soda solution and causti- potash solution salt solutions like sodium chloride, ammonium chloride alcohols, ketones such as methanol, ethanol, acetone-organic acids like formic acid, acetic acid
No resistant to: strong oxidizing agents such as halogens like fluorine, chlorine, bromine halogenated hydrocarbons aromatic hydrocarbons
As to the resistance, the respective concentrations and temperatures are to be observed.
PVC CPVC Pall-Ring
Sizes
mm
Surface
m2/m3
Free Vol.
%
Number
per m3
Weight
kg/ m3
16*16*1
25*25*1.2
38*38*1.4
50*50*1.5
76*76*2.6
260
210
140
100
73
91
90
89
90
92
230000
53500
13500
6300
1930
141
82
54
51
58
Metal pall ring || PP Pall ring || PVC , CPVC Pall ring || PVDF Pall ring || PTFE pall ring || Ceramic pall ring || Improved pall ring || Hy pak |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SS304 SS316L pall rings |
|
|
SS304 SS316L pall rings is one of the most common and well known random tower packings, we can make Carbon steel pall ring, SS304 pall ring, SS304L pall ring, SS316 pall ring, SS316L pall ring, Titianium pall ring, Monel pall ring, Metal Pall Ring is an industry standard design media developed from the Raschig Ring and is used widely in variety of applications. By improving the Metal pall ring geometry enables high gas and liquid transfer rates, greater capacity and lower pressure drop than standard cylindrical rings. The interior and exterior contacting surfaces of the Metal pall ring provide for an effective distribution of liquids and gasses and resist plugging, fouling and nesting.
Advantages of Metal Pall Ring:
Lower pressure drop
Good liquid / gas distribution and higher mass transfer efficiency
Versatility, easily wettable, high resistance to fouling, high temperature
High Mechanical Strength, suitable for deeper beds
High temperature resistance
Application of Metal Pall Ring:
Metal Pall Ring Packing is widely used in all kinds of separation, absorb plants, constant decompress plants, compounding ammonia plant, decarbonization , desulfuration ，separation of ethylbenzene, separation of isooctane/ methylbenzene, Absorption, Aeration, Degassing, Desorption, Distillation, Stripping, Heat Recovery, Extraction, Various separation and absorption applications at atmospheric pressure and under vacuum, where a low pressure drop is critical,H2S, NH3 & SO2 Absorption & Stripping, Steam Stripping, Quench towers, Direct contact cooling.
Absorption Aeration Degassing Desorption
Distillation Stripping Heat Recovery Extraction
Material:
Metal Pall rings are available in a wide range of materials,such as stainless steel,carbon steel,304,304L,410,316,316L,aluminum,bronze,and other alloy.
Tech data of Metal Pall Ring Packing:
Specifications
(mm) D*H*δ
(mm) Bulk number
(n/m³) Specific surface area
(m²/m³) Bulk density
(m²/m³) Void volume
(m³/m³) Dry packing factor
(m-1)
Dg16 16*16*0.5 143000 239 216 0.928 299
Dg25 25*25*0.5 55900 219 414.2 0.934 269
Dg38 38*38*0.7 13000 129 312 0.945 153
Dg50 50*50*0.8 6500 112.3 312.0 0.949 131
Dg76 76*76*1 1870 68 216 0.96 2
*Note: All of the following bulk density refer to stainless steel(AISI304) in the material thickness shown.Other wall thickness are available on request. |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
KYNAR PVDF Tri pack 2" |
|
|
Polyvinylidene fluoride, or polyvinylidene difluoride (PVDF) is a highly non-reactive and pure thermoplastic fluoropolymer produced by the polymerization of vinylidene difluoride.
PVDF is a specialty plastic material in the fluoropolymer family; it is used generally in applications requiring the highest purity, strength, and resistance to solvents, acids, bases and heat and low smoke generation during a fire event. Compared to other fluoropolymers, it has an easier melt process because of its relatively low melting point of around 177 °C.
KYNAR PVDF Tri pack design further prevents dry spots and compression interlock, two phenomena common to traditional packing media, both of which cause liquid and air channeling and decrease media efficiency.
Note: surface area alone does not guarantee performance. Excess surface area can impede gas/liquid contact and create higher pressure drops, thus increasing horsepower requirements and operating expense. Tri-Pack Media tower packing provides the optimum surface-to-open-area ratio for achieving best mass transfer efficiency and lowest operating costs. It is the industry standard for random dump tower packing media. Tri-Pack Media Tower Packing is available in three sizes in a variety of injection-molded resins including polypropylene, PVC, KYNAR®, Halar®, Teflon® and glass-filled polypropylene.
Physical Properties for KYNAR PVDF Tri pack :
:
Size
1 inch
1 1/4 inch
2 Inch
3 1/2 Inch
Geometric surface Area
( ft²/ft³)
85
70
48
38
Packing Factor
28
25
16
12
Void ratio
(%)
90
92
93
95
Weight
(lb/ft³)
6.2
5.6
4.2
3.3
Number/ft³
2300
N/A
380
48
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Polypropylene Tellerette 2K,Tellerette 2k,Tellerette 2R |
|
|
Polypropylene Tellerette 2K,Tellerette 2k,Tellerette 2R Tower Packing maintains good liquid distribution through packing depths in excess of 10 metres. Good initial liquid distribution is essential. Spray headers using full cone spray nozzles are recommended. Weir distributors are not recommended.B. Design of the packing supports is important.
we can make Tellerette 2K in Polypropylene, PVDF, PVC etc.
Specifications for Tellerettes.
MODEL Outer Diameter (mm) Height surface area (m2/m3) Void volume 3/m3 Dry packing factor ( m-1 )
O 25 9 269 82 488
1R 47 19 185 88 271
S 51 19 180 89 255
M 73 28 127 89 180
L 95 37 94 90 129
LL 145 48 65 95 76
2K 83.00 32 98 92 16
3K 105.00 56 72 96 9
Tellerette tower packing is a type of inert packing with the appearance of a circular-wound spiral, used to create a large surface area to increase contact between falling liquid and rising vapor; used in gas-absorption operations
Tellerette 2K || Tellerette 2R || |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Scrubber Packing (TELLERETTE) |
|
|
1. Purpose
We have produced and sold successfully plastic packing TELLERETTE as used for gas scrubbing for over twenty years.
As this packing has excellent features of mass and heat transfer efficiency for gas absorption, air conditioning, etc., it has been used as packing of high corrosion resistance and low pressure drop with extensive application for Gas Absorber, Cooling Tower, Deaerator, Reactor and other gas-liquid contact systems.
Various data on equilibrium, design and materials based on a long experience in using the packing are available on request.
2. Performance
"TELLERETTE" originated from spiral shape of packing made of polyethylene under the licence from Dr. Teller in the 1960s. Since then, we have developed and improved the production method by ourselves and following kinds are available at present:
Physical Properties of TELLERETTE
NOTE: Resins applied are as enumerated below, PVDF, ETFE, PFA are applicable, too.
Fig.1 HOG TELLERETTE Type-EL
(NH3-AIR-H2O SYSTEM)
3. Characteristics
1) This form of packing is designed not to provide downward liquid flow with dead spots but large effective surface area per unit packing volume.
2) Excellent liquid distribution and uniformity are obtained, because of a large number of branching and junction, in addition to curve structure of the packing.
3) Reduction in pressure drop attained by filament-shape with large void space enables fans or blowers to require less electrical power (energy saving).
4) Packing made of synthetic resin means good chemical corrosion resistance and increased structural strength.
5) Light weight means easy handling to fill in and out.
4. Subject
Gas absorption: SO2, SO3, NH3, CO2, H2S, HCl, Cl2, HF, NOX, organic solvents
Gas stripping: NH3, CO2, O2, contaminated water by trihalomethane, water containing organic chlorine compound
Cooling: Air cooling (liquefaction) and water cooling
Chemical reaction: Black liquor oxidation and white liquor oxidation
Dehumidification: Air and water vapor in Cl2
Applications
H2SO4/Ammonium sulfate industry: SO2, SO3, NH3, Absorber, Scrubber
Soda industry: Chlorine drying tower
Iron & steel/coke industry: COG desulfurization tower, COG middle/light oil collector, gas cooling tower
Oxygen plant: Air cooling
Thermal power: Flue gas desulfurization
Chemical industry: H2S, HCl, Cl2, HF, NOX elimination, organic solvents recovery
Pulp industry: Black/white liquor oxidation
Water purification: Ammonium, trihalomethane, trichloroethylene stripping
Sewage treatment: Deodorization
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SS304,SS316, Carbon steel Intalox Saddle Ring |
|
|
The shape of SS304,SS316, Carbon steel Intalox Saddle Ring is between ring and saddle, and therefore having advantages of the two. This structure helps distribution of the liquid and increases gas channels. It has smaller resistence, larger flow rate, higher efficiency, better filling intensity and rigidity than PALL ring. It's a kind of bulky filling used most widely at present.
Intalox saddle rings are made of ss304,ss316,ss304L,ss316L,copper,carbon steel they are are widely used in:
• Desulphurization and decarburization system in compound ammonia plant
• Decompressed plant in crude oil separated plant
• All kind of separation process such as separation of methanol
• Separation of organic acid
• Absorbing or desorbing tower
Please find the technical data sheet forSS304,SS316, Carbon steel Intalox Saddle Ring in the following:
Model
Size
d×h×δ
mm
Number
n/m3
Cumulate Weight
(γP)
kg/m3 Specific Surface Area
α
m2/m3 Voidage
(ε)
m3/m3 Dry Filling Factor
(α/ε3)
m-1
DG25 25×20×0.5 119047 353 185 0.96 209.1
DG38 38×24×0.5 31654 249.6 140.4 0.968 126.6
DG50 50×28×0.8 11160 239.7 90.1 0.97 84.7
DG76 76×48×1 3320
244.7
57.6 0.97 63.1
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
York 931, 422, 431, 326, 421, 333, 371 mist eliminator |
|
|
York 931, 422, 431, 326, 421, 333, 371 mist eliminator Demister Used in case of low-pressure loss is required, or when blocking-up may occur
Style and Their Feature
Style
Density kg/m3
FreeVolume %
SurfaceArea m2/m3
Products of Other Companies
Metex
York
Becoil
Knitmesh
Vico-Tex
Uop
Koch
Acs
H
80
99.0
158
Hi-Thruput
931
954
4536
160
B
511
7CA
L
120
98.5
210
422
N
144
98.2
280
Nu-Stanadrd
431
9030
280
A
911
4CA
SN
128
98.4
460
326
415
706
SL
193
97.5
375
Xtra-Dense
421
890
9033
380
C
1211
4BA
SM
300
96.2
575
SH
390
95.0
750
T
220
97.2
905
R
432
94.5
1780
Multi-Strand
333
800
W
220
97.2
428
Wound
GS
160
96.7
5000
371
STYLE FEATURES
H-Style Can permit highest vapour velocities for mist load than any other styles. Used in case of low-pressure loss is required, or when blocking-up may occur, or when the removal of larger mist or high efficiency is not required. Usually used 150 m/m thickness. As for the efficiency equivalent to SL-Style, used in 200 m/m thickness
N-Style For all round use. It has 95-99% efficiency against 8μ mist at 1-5 m/sec velocity.
SL-Style Used when high efficiency is required. Though pressure loss is increased slightly, it is considered to have 95-98% efficiency against 3μ mist at 1-6 m/sec velocity. This S-Style is especially needed when approximately 90% efficiency at 1 m/sec velocity is required.
T-Style Used when removing of approximately 2μ-3μ mist. Especially when the entrainment is 1.0 gr/m³ or less; 200 m/m to 300 m/m thickness is used.
R-Style Used for removing of every minute mist of approximately 1μ. The most efficient type for its thickness.
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Bio-Media packing |
|
|
Kaldnes bio-media is important because a delicate eco-system is naturally developing for the bacteria involved in the nitrification process. Kaldnes media provides the maximum active surface area for the bacteria to colonise, more than other types of static media. It is this process which removes harmful ammonia and nitrite from the water.
With Bio Media-MBBR-Once submerged inside the bioreactor, the Bio Media operates as non-clogging media. No channels or dead spots like in other technologies. The Bio Media optimizes protection for the biomass and makes the WWTP extremely robust and reliable.
Application: Domestic and Industrial Wastewater, Package Plants for Wastewater, Wineries, Most Organic Wastewater. Upgrade New and WWTP, Nitrification & de-nitrification.
Bio Media Makes very compact wastewater plants, robust stable operation, no backwash required, no membrane, self -cleaning media, never need to replace. Its surface area: 550 m²/m³.
Biocell filter media for fish farming, waste water treatment, filter media, fish jar,kaldnes filter media
Advantages of BIOCELL Media
• High relative surface area per cubic meter
• Lightweight zero buoyancy
• Self cleaning
• Ideal surface for biofilm to multiply
Ideal Applications
• Sewage treatment
• Aquaculture farms
• Koi filters
The technical indices of biocell:
PRODUCT NO
PE01
PE02
PE03
PE04
PE05
Diameter×Height(mm)
12×9
11×7
10×7
14×9.8
25×12
Weight per m3
(kg)
130
140
155
125
95
Number of unites per m3
666,340
1038,000
1038,700
341,000
135,300
Specific surface area(m2/m3)
>693
>845
>834
>591
>427
Color
Natural White
Material
Virgin polythene
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
PTFE bellows expansion joint |
|
|
NINGBO T.C.I CO., LTD is the specialized mfg of PTFE bellows expansion joints, PTFE is a kind
of excellent material to resist strong acid or alkali conditions, the Compensation for thermal
expansion and contraction of the displacement and misalignment, to reduce the vibration of
piping system.
PTFE bellows expansion joint through special processing methods, can not be changed in the past
around the curved pipe characteristics, can be resistant to various concentrations of acid, alkali, salt.
PTFE bellows expansion joint can be used to connect the machines with lower graphite, ceramic glass pipes,
can be used for tank car, tank, container or to the reactor, discharge pipes, the pipes can be connected or
used to balance the dislocation due to weather or other causes since the pipe displacement, changing size
or to eliminate high-frequency mechanical vibration. Can be made for special occasions, tubular reactor or
heat exchanger and so on.
Specification of PTFE bellows expansion joint:
Pressure: MPa：-0.01、-0.05、0.01、0.05、0.1、0.25、0.6、1；
Size: DN80 to DN2500
Temperature: -50～150℃
Our PTFE bellows expansion joints are mainly used for chemical industries,
Medicine, food industries. |
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SUS316L SINGLE BELLOW EXPANSION JOINT |
|
|
Size: DN2000
Material: Connector pipe: SUS316L
Bellow: SUS316L
Thickness: 6mm thick
we can make the metallic expansion joints according to our customers'
design, or we can also design for our customers for this expansion joint.
TCI provides Stainless steel expansion joints for chemical industries or
power technologies, the stainless steel expansion joints are in high performance
multi-ply metallic bellows fabricated from Stainless steel, Inconel 625, Alloy X,
SS316 Stainless steel and other special material.
We can provide stainless steel expansion joints sizes from DN50 to DN1000,
we can also make according to customers drawings.
Third party inspection is accepted.
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
SUS316L SINGLE BELLOW EXPANSION JOINT |
|
|
Size: DN2000
Material: Connector pipe: SUS316L
Bellow: SUS316L
Thickness: 6mm thick
we can make the metallic expansion joints according to our customers'
design, or we can also design for our customers for this expansion joint.
TCI provides Stainless steel expansion joints for chemical industries or
power technologies, the stainless steel expansion joints are in high performance
multi-ply metallic bellows fabricated from Stainless steel, Inconel 625, Alloy X,
SS316 Stainless steel and other special material.
We can provide stainless steel expansion joints sizes from DN50 to DN1000,
we can also make according to customers drawings.
Third party inspection is accepted.
|
|
| » Posted by: NIGNBO T.C.I CO;LTD [China] |
|
|
|
|
|
[Sell]
Stainless steel Cleaning Scrubber |
|
|
This kind of Stainless steel scrubber is very normal and popular in household Cleaning in Euro.
Supply best quality Scourers with New Style packing at your request. AISI410/ AISI430.
This kind of Stainless steel scourer very high grade packing , and mainly to Euro market.
It is looks very beautiful, bright, shining and thin wire. The specification of this goods is as following:
Weight: 20g/pc, and 4 pcs in one blister pack.
Qty/ctn: 100 cards.
CBM/ctn: 0.12CBM.
Qty/20fcl: 18000 sets.
Qty/40hq: 50000 set.
1. 15g/pc.3 pcs in a poly bag.280bags/CTN.
2. We specialize in the production of Stainless steel Scourer.
3. Material:AISI410.
4. It doesn't hurt pots or any surface |
|
| » Posted by: Hainachuan Wire Mesh Products Factory [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 next»
|
|
|
