|
|
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
 |
|
Silicone rubber for concrete molds applications
Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man -made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for concrete molds
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact Mr Edward
office no. :0086-755-89212382
Mob:86-18938867552
Skype: edward910108
Email :hysy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
» Posted by: shenzhen hong ye jie factory [China]  |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for Pad Printing Silicon Rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for Pad Printing Silicon Rubber
20kgs/drum vacuumed packing
For more information , pls feel free to contact Mr Edward
office no. :0086-755-89212382
Mob:86-18938867552
Skype: edward910108
Email :hysy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: shenzhen hong ye jie factory [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for Platinum cured silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for Platinum cured silicone rubber
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Mr Edward
office no. :0086-755-89212382
Mob:86-18938867552
Skype: edward910108
Email :hysy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: shenzhen hong ye jie factory [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for Platinum cured silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for Platinum cured silicone rubber
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Mr Edward
office no. :0086-755-89212382
Mob:86-18938867552
Skype: edward910108
Email :hysy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: shenzhen hong ye jie factory [China] |
|
|
|
|
|
[Sell]
RTV2 silicone rubber |
|
|
RTV2 silicone rubber applications
1. RTV2 silicone rubber can used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,
2. RTV2 silicone rubber is applicable for large statue Buddha, relieve ,furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold
3. RTV2 silicone rubber is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
RTV2 silicone rubber features
RTV2 silicone rubber is white flowing liquid with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
RTV2 silicone rubber operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
Shelf life for RTV2 silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for RTV2 silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact Mr Edward
office no. :0086-755-89212382
Mob:86-18938867552
Skype: edward910108
Email :hysy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: shenzhen hong ye jie factory [China] |
|
|
|
|
|
[Sell]
Addition cured silicone rubber |
|
|
Description of Addition cured silicone rubber
addition cured silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of Addition cured silicone rubber
Addition cured silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of Addition cured silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of Addition cured silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life of Addition cured silicone rubber
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for Addition cured silicone rubber
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Mr Edward
office no. :0086-755-89212382
Mob:86-18938867552
Skype: edward910108
Email :hysy(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: shenzhen hong ye jie factory [China] |
|
|
|
|
|
[Sell]
Liquid Silicone for Injection Molding |
|
|
Keywords
Injection molding silicone,
baby nipples silicone rubber ,
liquid silicone rubber ,
cake molds silicone,
silicone for sealing elements,
Model number:
HY-923
Description:
Liquid Silicone for Injection Molding is a two-component liquid silicone rubber for injection molding processes. The silicone rubber shows a higher productivity, high transparence, less yellowing and low volatile contents. It would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Applications:
Because of the outstanding properties, The liquid silicone rubber for injection molding is particularly suitable for the following elastomeric articles: baby nipples, medical tubs, cake molds, food molds, sealing elements, O-rings, stoppers, diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
Specification:
Vulcanisates consisting of liquid silicone rubber are distinguished by the following properties:
?High productivity, high transparence
?High flowability, low viscosity and short injection time.
?Low volatiles content; Fast cure
?Excellent mold release, Excellent Thermal stability
?Excellent compression set; Excellent resilience
?High stability to ozone and ultraviolet light
?Outstanding resistance to ageing
?Not readily combustible, does not melt or drip
?Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Processing Recommendations
Ready-to-use mixtures (of the components A and B) are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230?C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
Shelf life
Correctly stored in its original unopened container at room temperature (24?C). The liquid silicone rubber has a shelf life of 6-8 months from the date of manufacturing. Containers, which have been opened, must be kept tightly closed afterwards
Package
20kg/drum part A + 20kg/drum part B and 200kg/drum part A + 200kg/drum part B.
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18823707214
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Posted by: green Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Liquid silicone rubber for insole making |
|
|
Model number:
E610, E620, E625, Q610 Q620, Q625 silicone rubber
Key words:
Silicone insole,
shoe insole silicone rubber ,
shoe sole silicone rubber,
insole liquid silicone rubber,
liquid silicone rubber for insole,
shoe insoles silicone rubber,
Specifications of liquid silicone insole
1. Comfortable and durable Silicone Gel Insole
2. Ideal for any type of activity sports
3. Be washable and reusable
4. Anti-silo heel pads
5. Provide heel support, extra-cushioning and stability
6. Protect and prevent impact on the heel bone
7. Relax foot
8. More healthy, therapy product
9. Eco-friendly and environmental-friendly product
10. Shock-absorption silicone rubber
Description of liquid silicone rubber for insole making
Liquid silicone rubber for insole making is a kind of addition cure silicone rubber. It is primarily intended for silicone insole as a kind of foot care silicone rubber. With two component silicone rubber part A and part B, mixing ratio is 1:1. Generally the color is translucent or transparent.
Storage of liquid silicone rubber for insole making
Liquid silicone rubber for insole making is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of liquid silicone rubber for insole making
5kg/drum, 20kg/drum and 200kg/drum
Shelf-life of addition cure silicone rubber
Twelve (12) months under room temperature 25 Celsius.
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18823707214
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Posted by: green Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Skin Tone Silicone Rubber for Love Dolls |
|
|
Keywords
silicone dolls,
skin tone silicone rubber ,
silicone rubber for love dolls ,
silicone rubber for body organs ,
Skin Tone Silicone Rubber for Love Dolls
Model Number
HY-E605 silicone rubber
Application of Life Casting Silicone
It is mainly used to make soft silicone products , such as sex toys, silicone dolls, love dolls, silicone mask, body organs, body breast enhancers, shoulder pads, paster, trackion , mask, etc.
Features of the life casting silicone rubber
The life casting silicone rubber can be used for a long period and maintain softness and elasticity within a temperature range of -65?C ~ 200?C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic, odourless, low linear shrinkage, easy operation, etc.
Using instructions of the life casting silicone rubber
Mix component A and component B evenly according to the mixing proportion of 1:1, and can be poured after deair the bubbles. The operating time (5-10) mins depends on the temperature; the curing time is 20-30 mins at the room temperature; and the curing time can be reduced to 10 minutes with the temperature increased to 80~120?C. The operating time of the room temperature quick drying type is less than 20 minutes and the curing time is 0.5 hour. The product can be produced in skin color, yellow, etc. according to the customer's requirements.
Precautions of the life casting silicone rubber
Life casting silicone rubber is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber. So, please do not mix with or touch those substances during using.
Package of the life casting silicone rubber
5kg/drum, 20kg/drum and 200kg/drum
Transportation regard as non-hazardous goods, with shelf life of half year, hermetically sealed, with prevention from being in contact with acid, alkaline, and other impurities.
For more information , pls feel free to contact Ms penny
office no. :0086-755-89948294
Mob:86-18938867517
Skype: penny9110
Email :hyxe(at)szrl(dot)net
Welcome to our website 3w dot szrl dot net
|
|
| » Posted by: green Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Addition cure silicone rubber |
|
|
Key words:
Addition cure silicone rubber
addition silicone
addition molding silicone
platinum cure silicone rubber,
platinum cure food grade silicone,
Model Number:
HY-E620, HY-E630, HY-E642
Brief introduction of addition cure silicone rubber:
Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making and so on. It is nontoxic and with very low shrinkage.
Applications of addition cure silicone rubber:
Addition cure silicone rubber is a kind of food grade silicone rubber. It is primarily intended for cake mold, candy mold, chocolate mold and other food grade silicone mold, also intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Features of addition cure silicone rubber:
1. Two-component silicone rubber with platinum catalyst
2. Simple mixing ratio with 1:1 dosage
3. With high transparency, tensile strength, and tear strength.
4. Nontoxic & reach to Food grade
5. With good heat stability and weather ability ( temperature resistant range of -60-250 C)
6. With heat-ageing resistance
Storage of addition cure silicone rubber:
Addition cure silicone rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 9 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of addition cure silicone rubber:
5kg/drum, 20kg/drum and 200kg/drum
Shelf-life of addition cure silicone rubber:
Twelve (12) months under room temperature 25 Celsius.
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18823707214
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Posted by: green Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Electronic potting compound silicone rubber |
|
|
Model Number:
HY-9300, HY-9315, HY-9325
Brief Introduction
Electronic potting compound silicone rubber is a code of addition cure silicone rubber, which is similar to KCC potting silicone rubber. It has a low viscosity and mixing ratio 1:1, easy in operation and pourable. The electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and anti-vibration.
Applications of Electronic potting compound silicone rubber
The potting silicone rubber is a kind of low viscosity, Inherent flame resistance, two components silicone rubber with heat-conducting. It can cure in both room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved. It mainly applied in electronic components surface with materials of PC (Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Operation of Electronic potting compound silicone rubber
1. Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Storage of Electronic potting compound silicone rubber
The potting silicone rubber is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of Electronic potting compound silicone rubber
5kg/drum, 20kg/drum and 200kg/drum
Need any help on silicone rubber, please feel free to contact Ms penny:
Tel: 0086-0755-89948294
Mob:0086-0755-18938867517
E-mail: hyxe(at)szrl(dot)net
Skype:penny9110
|
|
| » Posted by: green Hong Ye Jie Technology Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Platinum cured silicone rubber for tire mold
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It?s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Ms Mary
office no. :0086-755-89948019
Mob:86-18938867578
Skype: mary901116
Email :hyxh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Platinum cured silicone rubber
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Ms Mary
office no. :0086-755-89948019
Mob:86-18938867578
Skype: mary901116
Email :hyxh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber
20kgs/drum vacuumed packing
For more information , pls feel free to contact Ms Mary
office no. :0086-755-89948019
Mob:86-18938867578
Skype: mary901116
Email :hyxh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Liquid Silicone rubber for gypsum molds |
|
|
Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum applications
1. Liquid Silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber is two part silicone with general hardness of 22-50A?after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3?5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
Shelf life for Liquid Silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact Ms Mary
office no. :0086-755-89948019
Mob:86-18938867578
Skype: mary901116
Email :hyxh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Silicone rubber for concrete molds |
|
|
Silicone rubber for concrete molds applications
Silicone rubber is mainly used for concrete statue ,concrete veneer, concrete paving, concrete fountain , faux stone, man made stone and all kinds of concrete products .
Silicone rubber for concrete molds features
Silicon rubber for concrete molds is white flowing liquid with general hardness of 22 to 50 shore A after curing with features
1) high tensile and tear strength
2) high duplication times
3) Low linear shrinkage
4) resistance to high-temperature
5) Low shrinkage and non-deformation
6) resistance to acid-alkali and expansion
Silicon rubber for concrete molds operation instructions
Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .
Shelf life for silicon rubber concrete molds
10 to12months, when stored in a dry and cool place under the room temperature 25.
Packing for silicon rubber for concrete molds
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact
Mr. Choice
office no. :0086-755-89948013
Mob:86-18938867612
Skype: CDlove-cho.ice
Email :hyyc(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid, generally named two components silicone rubber with mixing in 1:1 .It is mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3)exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3 to 5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8 to 10months, when stored in a dry and cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A plus 20kg/drum for part B in one set
,200 kg/drum for part A plus 200kg/drum for part B in one set
Any more information , pls feel free to contact
Mr. Choice
office no. :0086-755-89948013
Mob:86-18938867612
Skype: CDlove-cho.ice
Email :hyyc(at)szrl(dot)net
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber for tire mold |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber
with mixing in 1:1 .It?s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1)Non- shrinkage
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has
cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Ms krystal
office no. :0086-755-89212369
Skype: krystal00795
Email :hyxz(at)szrl(dot)net
Mobile: 8618938867601
FAX:8675589948030
Welcome to our website www dot szrl dot net |
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Platinum cured silicone rubber |
|
|
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of FDA grade silicone , generally named two-components silicone rubber
with translucent appearance, Part A and part B mixing in 1:1 .It?s suitable for molds making application.
Applications of platinum cure silicone rubber
Platinum cure silicone rubber mainly used for making concrete stones, wax molds, PU molds, resin molds, gypsum
casting, candle molding and chocolate , candy and any other food product molds making
Advantage of platinum cure silicone rubber
1)Non- shrinkage (less than 0.1% )
2)high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4)high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has
cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
For more information , pls feel free to contact Ms krystal
office no. :0086-755-89212369
Skype: krystal00795
Email :hyxz(at)szrl(dot)net
Mobile:8618938867601
FAX:8675589948030
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
[Sell]
Pad Printing Silicon Rubber |
|
|
Pad Printing Silicon Rubber Usages:
Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .
Pad Printing Silicon Rubber description
Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
Pad Printing Silicon Rubber Features:
1) High print times
2) abrasion resistance.
3) Good printing effects
4) Permanent and durable
Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the vacuumed mixture into the original mold slowly,
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kgs/drum vacuumed packing
For more information , pls feel free to contact Ms krystal
office no. :0086-755-89212369
Skype: krystal00795
Email :hyxz(at)szrl(dot)net
Mobile: 8618938867601
FAX:8675589948030
Welcome to our website www dot szrl dot net
|
|
| » Posted by: SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 next»
|
|
|
