|
|
|
|
|
[Sell]
Vibrating Feeder |
 |
|
Vibrating feeder is used to match the crushing and sieving equipments for feeding and selecting, widely used in the industries of mining, metallurgy, coal mining, water conservation construction materials and chemistry, which can convey block, granular and powder materials to the set of accepting continuously and evenly or quantitatively, such as material-blending and feeding to the machines of crushing coal-selecting, screening, transporting and packaging, etc.
Working principle
The vibrating feeder is used to transfer the large size materials and granular materials from hopper to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line. Vibrating feeder reverses braking process the control cabinet that can make itself a fast shutdown for a short time, meanwhile has all kinds of protection functions, such as over-current, over-voltage and phase-loss. We can add the functions of power-lost controlling, feeding speed, remote immobilization and stepless speed adjustment according to the requirement of clients.
Features
1)Small volume, light weight, reliable quality,
long service life, simple structure
2) Convenient installation, operation and maintenance
3) High efficiency, large feeding capacity
4) Vibrating stably and smoothly, low noise
5) Less power consumption, more energy-efficient
6) Vibrating feeder works under the far exceeding resonance, it has the advantages: stable amplitude, easy to operate, strong adaptability to various material
7)The feeding quantity may be adjusted with stepless conveniently without necessary to adjust the eccentric shaft after adding the motor regulator
Jinshan Machinery Co.,Ltd insists the principle of “Credit First, Customers Uppermost” and staying the idea of “Quality Makes Splendish and Reputation Create Future” Welcome the new and old customers to cooperate!
Email: lisa.8704@live.cn Tel: 86-0632-6682629 86-15965121270
|
|
» Posted by: Zaozhuang Jinshan Machinery Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Impact Crusher |
|
|
Impact crusher can handle different materials with size no more than 500mm and compression strength below 360 Mpa. Because of its special and good performance, it is widely used in stone crushing process in fields such as highway construction, water conservancy and construction.
The Impact Crusher crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact plate and rotor.
Advantages
1) High efficiency, low consumption;
2) Adjustable discharge opening
3) Reliable operation
4) Easy maintenance and economical running cost
5) Because flat hammer is made of high chrome，more suitable for crushing hard ore.
6) Impact plate is made of wearable materials; which can be adjusted to create cuboids
Jinshan Machinery Co.,Ltd insists the principle of “Credit First, Customers Uppermost” and staying the idea of “Quality Makes Splendish and Reputation Create Future” Welcome the new and old customers to cooperate!
Email:lisa8.8704@live.cn Tel: 86-0632-6682629 86-15965121270
|
|
| » Posted by: Zaozhuang Jinshan Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Circular vibrating screen |
|
|
The vibrating screens can be used to separate minerals into various sizes for further processing in crusher. It incorporates a vibrator, eccentric block, mesh, spring, triangular belt and motor and is used for discharging bulky goods, sand, gravel, coal and coke from hopper to crusher. We can design and supply all ranges of vibrating screens according to the capacity and requirement.
Working principle
The vibrator rotates at high speeds once power is supplied. At this point, the screen rotates in a circular motion, and then the minerals on it are sorted and filtered into the following screen according to size while the vibration and rotating motion continues to break down larger minerals, allowing them to pass through the screen. The left minerals discharge into the discharge hopper.
Advantages
1) Simple structure and easy maintenance.
2) Adopting the structure of small amplitude, high frequency and large obliquity,
3) High efficiency, large handling capacity
4) Long service life, low running cost and low noise.
Jinshan Machinery Co.,Ltd insists the principle of “Credit First, Customers Uppermost” and staying the idea of “Quality Makes Splendish and Reputation Create Future””Welcome the new and old customers to cooperate!
Email: lisa.8704@live.cn Tel: 86-0632-6682659 86-15965121270
|
|
| » Posted by: Zaozhuang Jinshan Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
China Anneal Oven |
|
|
| Welcome to visit jtfurnace dot com. Anneal Oven for aluminum alloy The aluminum production and processing into the aging treatment carried out to improve the mechanical characteristics of aluminum and the promotion of strength. The heating way may elect to use oil, gas, electricity. Advantages: 1. Optimizing the structure design. Available in single door or double door, do towline type or roller type. 2. The circulating fan uses squirrel-cage type double-suction high-volume blower. low noise, high efficiency, to achieve temperature uniformity of +-5. 3. When dealing with long profiles in the circulation air duct, set the time and temperature of the reversing mechanism, two-way thermal cycling. and promote the furnace temperature uniformity. Detailed product specifications, please visit our website jtfurnace dot com. And mail to jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Steel Wire Conveyor Belt Vulcanizing Press(Qingdao Tycoon) |
|
|
Made of high strength aluminum alloy, small size, light weight, easy handling and installation, electric heating plate face temperature distribution, manual / automatic body control hydraulic pressure device for the plate structure has the advantages of pressure and uniform. The products is the vulcanization bonding of advanced equipment.
Can be widely used in various conditions of tape curing joint and pick up the work (plus ordinary canvas belt. High-strength nylon tape. Rope core tape, etc.)
|
|
| » Posted by: Qingdao Tycoon Internatiaonl Trading Co.,ltd [China] |
|
|
|
|
|
[Sell]
EVA Foaming Products Making Line,Qingdao Tycoon Offer Formula |
|
|
EVA foaming press are widely used in production of shoe materials, plastic foam flooring, insulation materials, luggage liner, sports protective material, diving clothing, life jackets, etc. The machine adopts steel structure, plunger by cold hard surface for HR - 70, the product has little pressure, temperature, curing process reliable performance with automatic pressure, open mold speed, etc. Suitable for EVA foaming class slippers, shoes materials xiangsu products.
The present machine is a newly-designed model after research the characters of plate vulcanizier in dosmestic and aboard,it is pikkar support pressure foaming machine with compact structure and high pressure,it has two heating method:electricity heating or stream heating,has digital display temperature gauge.Operation and maintenance is easy,also with the function of auto add pressure,timed open mold and alarming etc.
|
|
| » Posted by: Qingdao Tycoon Internatiaonl Trading Co.,ltd [China] |
|
|
|
|
|
[Sell]
Two-Roll Mixing Mill For Rubber Or Plastic |
|
|
This machine is used for mixing and kneading raw rubber,synthetic rubber,thermoplastics or EVA with chemicals into even materials.The evenmaterials can be fed to calender ,hot presses or other processing machinery for making rubber or plastic products.It adopts hollow center groove roller or drilling hole smooth roller against difference using scope as mixing,refining or press pieces etc.This machine can be installed stock blender according to customer’s request to decrease the labor strength,also equipped with safety device.
|
|
| » Posted by: Qingdao Tycoon Internatiaonl Trading Co.,ltd [China] |
|
|
|
|
|
[Sell]
sell various Fertilizer machinery |
|
|
| Q.H.D Sannong Modern Mechanical Equipment Co.,Ltd is a high-tech manufacturer of bulk blending (BB) fertilizer equipments and ration packaging equipments. As the initiate of BB fertilizer concept and holder of numbers of national patents. Sannong is the leading corporation for product innovation and technology upgrading in the bulk blending (BB) fertilizer equipments industry in china from the day of its foundation. |
|
| » Posted by: Qinhaungdao Sannong Modern Mechnical Equipment Co., Ltd [China] |
|
|
|
|
|
[Sell]
Scrap metal baler (YD1300B) |
|
|
| Our machine has fast technolegy, which run faster than normal balers. 1.Product brief introduction: This machine cold compresses the light thin materials of dismounted automobile shells, waste bucket, waste copper and aluminum into rectangle lumps. The package is discharged from the front and secondary compression is applied. The operation efficiency is high and lump lengths are identical and uniform. The hydraulic system applies an integrated valve block and the product is stable and reliable in technical performance. 2.Specification: Model Nominal pressure (ton) Material box size (mm) Baler size (mm) Productivity(kgs/h) Bale discharging mode Motor(KW) Machine weight (ton) YD-630A 63 1000*600*500 200*200 500-750 Turn over 11 4.5 YD-1000 100 1000*700*500 250*250 220*220 200*200 750-1000 Turn over 11 5.5 YD-1000A 100 1100*500*500 200*200 750-1000 Front bale 11 5 YD-1300B 130 1200*700*550 300*300 250*250 1000-1800 Turn over 15 6 YD-1300C 130 1200*800*550 300*300 250*250 1500-2000 Turn over 15 6.5 YD-1350 135 1400*600*600 600*250 1500-2000 Front bale 18.5 7 YD-1600 160 1200*800*550 300*300 1500-2000 Turn over 18.5 7 YD-1600A 160 1600*800*800 350*350 1750-2250 Turn over 22 12 YD-2000 200 1600*1200*800 350*400 2000-2500 Turn over side push 30 18 YD-2500 250 2000*1200*1000 450*450 2250-3500 Turn over Side push 30 20 YD3150 315 2000*1400*1200 450*500 3750-4500 Side push 37 32 YD4000 400 2000*1600*1200 500*500 4500-6250 Side push 45 40 YD-4000A 400 2500*1600*1200 600*500 7500-10000 Side push 45 50 |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
Trough Feeder |
|
|
http://www.zcrusher.com/trough-feeder.html
Trough feeder introduction:
Our company has always devoted to technology research of machinery equipment for many years, and the factory of Trough Feeder specializes in producing Trough Feeder of every kind. It has the best production equipment, outstanding technical research and development team and produces the best Trough Feeder for you. Experts with rich experience in Trough Feeder provide specialized process information about Trough Feeder for you. This is the ideal choice for you to invest mineral processing industry.
Send me email:equipmentland2008@gmail.com to know more information about Trough Feeder.
Trough feeder application:
Trough Feeder is widely used in chemical, mine, metallurgy, construction, mine-selecting and coal and so on. And it sends block material to receiving device through storage silo.
Trough feeder can be set up on the ground and also can be hung on the discharging hole of ore storage bin. Trough base does alternate motion, and its frequency of stroke is 20-60 time/min, its stroke is 20-200 mm. Stroke can be properly adjusted through drive set eccenter. Eccentric distance is the half of stroke. According to production practice of mine-selecting factory, eccentric distance is not less than 30 mm for viscous minerals. Trough width of Trough Feeder is about 2-2.5 times of that of feeding maximum size. The biggest Trough Feeder can meet the feeding ore of iron ore less than 500mm. The common used specification is 980*1240 Trough Feeder, its feeding size is 350-0 mm and is situable for feeding equipment of 400*600 Jaw Crusher .
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Stone hammer crusher |
|
|
http://www.zcrusher.com/hammer-crusher.html
The hammer crusher also named hammer mill, it crushes by the collisions between high-speed hammer and materials, has features of simple structure, high reduction ration, high efficiency, etc. The PC was developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess.
The hammer crusher(hammer mill) crushes by the collisions between high-speed hammer and materiasl,and the hammer crusher(hammer mill) features are in its simple structure, high reduction ration, high efficiency, etc. The PC hammer crusher(hammer mill) were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
hydraulic metal baler (YD2500) |
|
|
| Our machine has fast technolegy, which run faster than normal balers. 1.Product brief introduction: This machine can cold compresses waste automobile shells, waste buckets, waste copper and aluminum into rectangle lumps. The package is discharged from the front and secondary compression is applied. The operation efficiency is high and lump lengths are identical and uniform. The hydraulic system applies an integrated valve block and the product is stable and reliable in technical performance. 2.Specification: Model Nominal pressure (ton) Material box size (mm) Baler size (mm) Productivity(kgs/h) Bale discharging mode Motor(KW) Machine weight (ton) YD-630A 63 1000*600*500 200*200 500-750 Turn over 11 4.5 YD-1000 100 1000*700*500 250*250 220*220 200*200 750-1000 Turn over 11 5.5 YD-1000A 100 1100*500*500 200*200 750-1000 Front bale 11 5 YD-1300B 130 1200*700*550 300*300 250*250 1000-1800 Turn over 15 6 YD-1300C 130 1200*800*550 300*300 250*250 1500-2000 Turn over 15 6.5 YD-1350 135 1400*600*600 600*250 1500-2000 Front bale 18.5 7 YD-1600 160 1200*800*550 300*300 1500-2000 Turn over 18.5 7 YD-1600A 160 1600*800*800 350*350 1750-2250 Turn over 22 12 YD-2000 200 1600*1200*800 350*400 2000-2500 Turn over side push 30 18 YD-2500 250 2000*1200*1000 450*450 2250-3500 Turn over Side push 30 20 YD3150 315 2000*1400*1200 450*500 3750-4500 Side push 37 32 YD4000 400 2000*1600*1200 500*500 4500-6250 Side push 45 40 YD-4000A 400 2500*1600*1200 600*500 7500-10000 Side push 45 50 |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
hydraulic baler (YD4000A) |
|
|
| 1.Brief introduction: This machine cold compresses material thickness between 6-10mm ,like materials of dismounted automobile shells,waste bucket, waste copper and aluminum into rectangle lumps. The operation efficiency is high and lump lengths are identical and uniform. The hydraulic system applies an integrated valve block and the product is stable and reliable in technical performance. 2.Product characteristics: 1. The longest main cylinder applies quick-action technology and its operation efficiency is one time higher than that of the machines of the same type in China. 2. The machine for export is designed with integration of main machine and ydraulic system. It covers small area and does not need any installation. 3. The package is discharged from side way, The package is compact and nice. 4.Full automatic and with fast device 3.Specification: Model Nominal pressure (ton) Material box size (mm) Baler size (mm) Productivity(kgs/h) Bale discharging mode Motor(KW) Machine weight (ton) YD-630A 63 1000*600*500 200*200 500-750 Turn over 11 4.5 YD-1000 100 1000*700*500 250*250 220*220 200*200 750-1000 Turn over 11 5.5 YD-1000A 100 1100*500*500 200*200 750-1000 Front bale 11 5 YD-1300B 130 1200*700*550 300*300 250*250 1000-1800 Turn over 15 6 YD-1300C 130 1200*800*550 300*300 250*250 1500-2000 Turn over 15 6.5 YD-1350 135 1400*600*600 600*250 1500-2000 Front bale 18.5 7 YD-1600 160 1200*800*550 300*300 1500-2000 Turn over 18.5 7 YD-1600A 160 1600*800*800 350*350 1750-2250 Turn over 22 12 YD-2000 200 1600*1200*800 350*400 2000-2500 Turn over side push 30 18 YD-2500 250 2000*1200*1000 450*450 2250-3500 Turn over Side push 30 20 YD3150 315 2000*1400*1200 450*500 3750-4500 Side push 37 32 YD4000 400 2000*1600*1200 500*500 4500-6250 Side push 45 40 YD-4000A 400 2500*1600*1200 600*500 7500-10000 Side push 45 50 |
|
| » Posted by: Jiangyin ChuangDa Machinery Industry Co.,ltd [China] |
|
|
|
|
|
[Sell]
China Bullet Teeth Supplier |
|
|
| Place of origin Changzhou, China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material 4142/42CrMo Port of loading Shanghai Packing Wooden case, Iron case or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Hight quality diesel engine parts /diesel fuel injection/DIESEL/DIESEL/DIESEL/DIESEL/DIESEL |
|
|
| yellow stone diesel parts plant can supply below item : www{at}yellowstonediesel{at}com 093400-2210 ND-DLLA157SND221 093400-2260 DLLA160SND226 093400-2270 ND-DLLA150SND227 093400-2280 DN0SD228 093400-2290 ND-DLLA150SND229 093400-2292 DLLA150SND229 093400-2300 ND-DLLA150SND230 093400-2301 DLLA150SND230 093400-2340 ND-DLLA150SND234 093400-2350 DN0SDND235 093400-2360 DLLA160SND236 093400-2380 DLLA150SND238 093400-2400 DLLA150SND240 093400-2410 ND-DLLA150SND241 093400-2420 ND-DLLA157SND242 093400-2430 ND-DLLA160SND243 093400-2431 DLLA160SND243 093400-2490 ND-DLLA160SND249 093400-2500 ND-DLLA157SND250 093400-2510 DLLA160SND251 093400-2530 DLLA160SND253 093400-2540 DLLA150SND254 093400-2630 ND-DLLA155SND263 093400-2650 DLLA150SND265 093400-2680 ND-DLLA154SND268 093400-2700 DN0SD1930 093400-2710 ND-DLLA145SND271 093400-2720 ND-DLLA150SND272 093400-2730 DLLA150SND273 093400-2770 DN0SDND277 093400-2790 ND-DLLA150SND279 |
|
| » Posted by: Yellow Stone Diesel Ind Ltd [China] |
|
|
|
|
|
[Sell]
plastic wheel chock with anti-slip rubber bottom |
|
|
| plastic wheel chock with anti-slip rubber bottom; suitable for caravan, RV, motorhome, light duty trailer etc. We have more than 20 types of wheel chock for various vehicles. please visit our website or contact me for more information. I believe we have the one you are interested. Qingdao Runbell Co., Ltd. Tel: 86-532-86873761 Fax: 86-532-86873760 http://www.runbell.com Email: runbell@163169.net |
|
| » Posted by: QINGDAO RUNBELL CO., LTD. [China] |
|
|
|
|
|
[Sell]
double sided rubber wheel chock |
|
|
| Double sided rubber wheel chock size: 10"x8"x6" weight: 4.4kg material: recycled rubber with reinforced nylon fiber suitable for heavy duty truck. Qingdao Runbell Co., Ltd. Tel: 86-532-86873761 Fax: 86-532-86873760 http://www.runbell.com Email: runbell@163169.net |
|
| » Posted by: QINGDAO RUNBELL CO., LTD. [China] |
|
|
|
|
|
[Sell]
rubber wheel chok |
|
|
| rubber wheel chock for small vehicle. We produce more than 20 types of rubber wheel chocks. if you are iterested, please feel free to contact us. Qingdao Runbell Co., Ltd. Tel: 86-532-86873761 Fax: 86-532-86873760 http://www.runbell.com Email: runbell@163169.net MSN: foxpele@hotmail.com Skype: foxpele77 |
|
| » Posted by: QINGDAO RUNBELL CO., LTD. [China] |
|
|
|
|
|
[Sell]
rubber wheel chock |
|
|
| wheel chock for truck less than 10 tons. We have more than 20 types of rubber wheel chocks. If you are interested in any of them, please feel free to visit our website or contact us: Qingdao Runbell Co., Ltd. Tel: 86-532-86873761 Fax: 86-532-86873760 http://www.runbell.com Email: runbell@163169.net |
|
| » Posted by: QINGDAO RUNBELL CO., LTD. [China] |
|
|
|
|
|
[Sell]
plastic wheel chock with DIN76051 standard |
|
|
| made of HDPE meet EU standard of DIN76051-53; For heavy duty truck; size: 480mm x 230mm x 200mm. We have more than 20 types of wheel chock for various vehicles. please visit our website or contact me for more information. I believe we have the one you are interested. Qingdao Runbell Co., Ltd. Tel: 86-532-86873761 Fax: 86-532-86873760 http://www.runbell.com Email: runbell@163169.net |
|
| » Posted by: QINGDAO RUNBELL CO., LTD. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
