|
|
|
|
|
|
|
[Sell]
Zhengzhou vipeak Ball Mill for sell stone crusher grinder mill |
 |
|
Ball Mill is an efficient tool for grinding many materials into fine powder. Ball Mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine. To use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.
Quite simply, the longer the Ball Mill runs, the finer the powder will be. Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the Ball Mill runs. Our Ball Mills have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals, and make Black Powder
Model: MQG Series
The feeding size(mm):≤25
Quantity (t):0.65-2, 1.6-5.8, 4-10, 7.5-17, 10-22, 8-36
http://www.vipeakmill.com/Vibrating.html
http://www.grinderpro.com/Spanish/Sand_Making.html
http://www.grinderpro.com/Circular_Vibrating_Screen.html
http://www.vipeakgroup.com/Symons.html
if you have any question,plz kindly contact me,I will reply to you asap.
email: chenchentracy@gmail.com
tel:0086-15824813486
|
|
» Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Zhengzhou vipeak HGM Series Micro-powder Grinder for sell stone crusher grinder mill |
|
|
HGM series of three-rings and medium-speed micro powder grinder is a new type of making micro powder machines through more than twenties times research and improvement, depending on two decades of hard work & experience and inputting the latest mechanical techniques of Sweden. It is an incorporated one of the two countries and a leader of the grinding industry nowadays.
HGM series of three-rings and medium-speed micro powder grinder is widely used in making fine powder or micro powder, and the raw materials should be non-inflammable and non-explosive under the Moh's hardness less than 6 grade such as limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore, etc. The lifetime of spare parts is relied on the hardness of raw materials, and is lowered once the Moh's hardness is up to 4-6 grade.
Main features:
1, High efficiency and lower consumption. In the condition of the same material, power and the fineness, its capacity is increased by 40% compared to the jet mill and mixing grinder.
2, Longevity. In the condition of the same power and the fineness, the spare parts have a longer lifetime, usually more than one year, to the shaft impactor crusher and the turbine crusher.
3, Non-bearings and non-bolt in the grinding chamber. Because of this, these questions destroying the machines can never exist for bearing, sealing element or the bolts loose.
4, The fineness of final products can add up 5μm, and screening rate is 97%.
http://www.vipeakgrinder.com/sand_making_machine.html
http://www.vktrituradora.com/
http://www.vipeakgrinder.com/belt_conveyor.html
if you have any question,plz kindly contact me,I will reply to you asap
msn:vipeaktracy@yahoo.com
skype:chenchentracy
email: chenchentracy@gmail.com
tel:0086-15824813486
stone crusher ,cone crusher , grinder mill , grinding mill |
|
| » Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Zhengzhou Vipeak High Pressure Medium Speed Grinder for sell stone crusher grinder mill |
|
|
High Pressure Medium Speed Grinder (High Pressure Suspension Mill), the new design, from VIPEAK is used to grind barite, limestone, kaolin, and ceramics and slag, whose Moh's hardness is below 9.3 scales, non-inflammable and non-explosive material.
Working Principle of High Pressure Medium Speed Grinder:
The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.
Product Advantages of High Pressure Medium Speed Grinder:
(1) Our patent product
(2) Product size is adjustable in the range of 80 - 425 meshes
(3)Better design, low cost
http://www.crushingmill.com/Raymond.html
http://www.grinderpro.com/Spanish/Hammer.html
http://www.vipeakgroup.com/Spanish/Sand_Washing.html
if you have any question,plz kindly contact me,I will reply to you asap.
msn:vipeaktracy@yahoo.com
skype:chenchentracy
email: chenchentracy@gmail.com
tel:0086-15824813486
|
|
| » Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Zhengzhou vipeak VSI Series Vertical Shaft Impact Crusher for sell stone crusher grinder mill |
|
|
Characteristics of Vertical Shaft Impact Crusher (Sand Making Machine):
Simple structure and low operating cost;
High crushing ratio with low consumption;
Function of fine crushing and crude grinding
Slightly influenced by moisture content of material, and the max moisture content is about 8%;
More suitable for crushing mid-hardness and high hardness materials;
Cubic shape of final products, high density of piling up and low iron pollution;
More wearable and easier maintenance;
Low working noise (lower than 75 decibel) and light dust pollution.
http://www.trituradoramin.com
http://www.grinderpro.com/Raymond.html
http://www.grinderpro.com/Crusher.html
if you have any question,plz kindly contact me,I will reply to you asap
msn:vipeaktracy@yahoo.com
skype:chenchentracy
email: chenchentracy@gmail.com
tel:0086-15824813486
|
|
| » Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
China Stump Grinder Tooth |
|
|
| Place of origin Changzhou, China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material 4142H / 42CrMo Port of loading Shanghai Packing Wooden case, Iron case or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Zhengzhou Vipeak Impact Crusher for sell stone crusher grinder mill |
|
|
Impact Crusher is used in both primary and secondary crushing applications of aggregate, and in recycle crushing of reinforced concrete, asphalt and other construction and debris. VIPEAK is a reliable supplier of Impact Crusher with new design.
Impact Crusher is composed of rotor, impact rack, frame, ratchet cover device, Transmission Device and other parts.
Working Principle of Impact Crusher:
When the Impact Crusher works, the motor drives the rotor rotate of the Impact Crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers affect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being re-crushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed to the required size and then discharged from outlet of the Impact Crusher.
Characteristics of Impact Crusher:
Excellent cubic final products
Special structure
Non-key connection
High chrome hammer
Durability in long time simplicity in operation
Easy adjustment, high reduction ration
Good performance and high reliability
http://www.crushermobile.com
http://www.vipeak.com/en
http://www.crushertrade.com:
http://www.vipeakgrinder.com
email: chenchentracy@gmail.com
tel:0086-15824813486
|
|
| » Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Zhengzhou Vipeak Symons Cone Crusher for sell stone crusher grinder mill |
|
|
For higher productivity, better reliability and flexibility, long service life, and better final product quality, the Symons type cone crusher is absolutely your best choice.
Symons type cone crusher offer several outstanding features such as excellent tramp release system, unique hydraulic lifting system, high crusher throw and reasonable cavity design, all of these features ensure the Symons type cone crusher can offer the unbeatable performance in secondary, tertiary and quaternary applications.
If your aggregate or mining business demands the 24-hours running, high-reduction, big capacity application, you will find the Symons type cone crusher optimized for your demands.
The innovations like the stable lubrication, excellent sealing feature, great abrasive material applied in key components and rugged construction effectively reduce the wear rate , extend the replacement period of the spare parts, evidently reduce the production cost in per ton hour material processed. All of these can help you to achieve the highest level of profitability.
Symons Type Cone Crusher Main Features:
1. Higher capacity and less wear costs.
2. Wide range of application suitability.
3. Easy to maintain, reduce the downtime and maintenance costs.
4. Stable running performance and easy operation.
http://www.vipeakgrinder.com
http://www.vipeakcrusher.com
http://www.vipeakmill.com
email: chenchentracy@gmail.com
tel:0086-15824813486
|
|
| » Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
Zhengzhou Vipeak Jaw Crusher for sell stone crusher grinder mill |
|
|
Jaw Crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.
Main structure of Jaw Crusher:
Jaw Crusher mainly consists of main frame, eccentric shaft, belt wheel, flying wheel, movable jaw plate, side board, toggle plate, back seat for toggle plate; gap adjusting
screw, returning spring, fixed jaw plate, movable jaw plate and so on. The toggle plate also plays the role of protecting.
Working Principle of Jaw Crusher:
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room. With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
http://www.crushingmill.com
http://www.grinderpro.com
http://www.vipeakgroup.com
if you have any question,plz kindly contact me,I will reply to you asap.
msn:vipeaktracy@yahoo.com
skype:chenchentracy
email: chenchentracy@gmail.com
tel:0086-15824813486
|
|
| » Posted by: Vipeak Heavy Industry Machinery Co., Ltd [China] |
|
|
|
|
|
[Sell]
VE pump /common rail test bench/injection pump |
|
|
| yellow stone diesel parts plant can supply below item : www{at}yellowstonediesel{at}com 093400-6340 DN0PDN113 093400-6360 DLLA154PN067 093400-6370 DLLA157PN069 093400-6400 DLLA154PN061 093400-6410 ND-DLLA157P641 093400-6420 ND-DLLA154P642 093400-6430 DLLA140P643 093400-6440 ND-DLLA150P644 093400-6500 DN0PD650 093400-6510 DN10PD651 093400-6670 ND-DLLA146P667 093400-6670 DLLA146P667 093400-6680 ND-DN0PD668 093400-6760 DN0PDN112 093400-6800 DLLA154PN058 093400-6810 ND-DN4PD681 093400-6870 DLLA154PN062 093400-7000 ND-DLLA144P700 093400-7080 DLLA154PN006 093400-7690 DN10PDN129 093400-7691 ND-DN10PDN128 093400-7700 ND-DN10PDN130 093400-8030 DLLA160PN010 093400-8040 DLLA154PN116 093400-8220 ND-DN0PDN121 093400-8220 DN0PDN121 093400-8370 DLLA154PN0171 103200-53000 N16 103204-53000 N28 |
|
| » Posted by: Yellow Stone Diesel Ind Ltd [China] |
|
|
|
|
|
[Sell]
best selling in world Cement mill |
|
|
http://www.zcrusher.com/Cement-mill.html
Cement mill's introduction:
Cement in powder form can be changed from plasticity paste to hard stone-like body and can become a total cemented granular materials through physical and chemical processes after being mixed with water. So cement is a good mineral binder. Cement can be not only hardened in the air, but also better hardened in the water in which it will maintain and develop strength. So cement is kind of cementitious material which will be of stronger hardness in water. Cement mil is used for cement grinding. Cement crusher is applied for cement crushing. In cement mining, you need to choose suitable cement grinding mill and cement crusher.
Cement mill's application:
Cement mill is the key equipment for grinding after the crushing process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, Fengde, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.
Cement mill's operating principle:
The ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material.After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended.
Cement production's process:
Cement Crusher -->Preparation of raw material --> Raw material homogenization -->-- Preheat decomposition > The burning of --cement clinker > Cement grinding mill (Ball Mill or Vertical Roller Mill)> Cement Packaging. Among all these procedures, we will introduce to you the cement crusher process |
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Vertical Shaft Impact Crusher |
|
|
http://www.zcrusher.com/vertical-shaft-impact-crusher.html
vertical shaft impact crusher features a unique combination of rotor design, wear material and crushing equipment design. This combination has proved revolutionary in improving capacity, gaining superior product shape quality and in reducing operating and wear costs.Zhongchuang Brand Vertical Shaft series impact crusher is a high-efficient rock crushing equipment with home and international leading level. The machine is developed by introducing the crushing theory and technology from Barmag Company of America and combining the actual situation of sand making. It is widely used for crushing of hard and crispy materials, such as rocks, grinding materials, refractory materials, cement clinkers, quartzite, iron ores and concrete aggregates. It is especially suitable for the sand and sandstone making for construction and road paving. It is more suitable for crushing mid-hardness materials and high-hardness materials. It is more suitable for crushing mid-hardness materials and high-hardness materials and Its product is cubic, and the density of piling up is high and the iron pollution is low. More environment protect with the working noise less than 75 decibels and little dust pollution.
Working Principle of vertical shaft impact crusher:
Material falls into the highs peed turning impellers from the top of machine and crushes with the material distributed around the impeller under the effect of high speed centrifugal force. after the impact with each other, the material is crushed between impeller and cabinet and is discharged from the bottom. It can cycle many times with the close circuit and the sieve device will control the granularity of finished products
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Cement mill |
|
|
http://www.zcrusher.com/Cement-mill.html
Cement mill's introduction:
Cement in powder form can be changed from plasticity paste to hard stone-like body and can become a total cemented granular materials through physical and chemical processes after being mixed with water. So cement is a good mineral binder. Cement can be not only hardened in the air, but also better hardened in the water in which it will maintain and develop strength. So cement is kind of cementitious material which will be of stronger hardness in water. Cement mil is used for cement grinding. Cement crusher is applied for cement crushing. In cement mining, you need to choose suitable cement grinding mill and cement crusher.
Cement mill's application:
Cement mill is the key equipment for grinding after the crushing process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, Fengde, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials.
Cement mill's operating principle:
The ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material.After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Mobile crusher |
|
|
http://www.zcrusher.com/Mobile-crusher.html
Mobile Crusher:
Jaw Crusher and Vibrating Feeder compose the unit of Mobile Crusher (rough crushing unit), and at the same time along with highly efficifent double deck feeder. Double deck feeder can reduce the load capacity of Jaw Crusher, and also increase the total production. Jaw Crusher is widely used in many ways, and Mobile Crusher are mainly used in primary crushing on mountain extraction. The capacity range of Mobile Jaw Crusher is 50500t/h.
Mobile Crusher Application
The Mobile Crusher(mobile crushing and screening plants) is applied to multistage crush large materials, and then screen the discharges according to their different specifications. The whole set plants is widely used to mine, building material, highway, rail way and hydropower industries, etc., finish crushing and screening operations at one time, produce required size and output for consumers.
Mobile Crusher Features and Benefits
The Mobile Crusher(plants) has the advantage of reasonable matching, unobstructed discharge all line, reliable working, convenient operation, high efficiency and saving energy. Especially the mobility is very good, so it can extend with the raw material places or the construction place, and it can also make multiple matching, get to different product requirements.
Mobile Crusher structure and working principle:
The Mobile Crusher(mobile crushing and screening plants) is composed of primary crushing and screening station and secondary one, belt conveyor, etc. Every crushing station is an independent working unit, they can respectively assume their different responsibility, and the belt conveyer is responsible for material transmitting and piling up between each crushing station.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
PF Precision Oil Purifier |
|
|
Ⅰ. Application
PF series muti-stages high precision oil purifier can purify the oil by removing the negative mechanical impurities. It is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. for oil filling, oil pumping as well as high precision purifying and pipe cleaning.
You can reach us at sinonsh96@sino-purification.com to Evelyn Chen.
Ⅱ. Features
Portable design makes it more convenient and flexible to move.
After filtration, the oil can be used as new oil.
With pressure protection system, filters blocking alarming system and auto-protection system, PF can be operated in high security.
Advance electrical control system
Small size, low noise and long life time |
|
| » Posted by: Sino-NSH Oil Purifier Manufacture Co., Ltd. [China] |
|
|
|
|
|
[Sell]
TF Turbine Oil Purifier |
|
|
Ⅰ.Relative Models
TF-A Turbine Oil Automation Purifier
TF-R Turbine Oil Regeneration Purifier
Ⅱ.Application
TF series is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large amount of water and others such as vapor, impurities, sludge, dielectric and colloid.
TF series will result in the improvement of the properties of turbine oil or other lubrication and extend the maintenance period of turbines or other equipments which have lubrication system and keep them operate in good condition.
You can reach us at sinonsh96@sino-purification.com to Evelyn Chen.
Ⅲ.Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil reuse.
The lubrication of turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
Ⅳ.Features
1. Eliminate soluble and dissolved water effectively and demulsify rapidly
TF series can not only separate large quantity of water but also remove trace of water from oil. Fitted with specially made demulsifying device (water separator), it is capable of making turbid emulsified oil very clear.
2. High effectively purify matters in oil such as impurities, sludge etc.
The automatic backwash filtering system can remove large amount of particulate matters and fine filter system can remove tiny particles.
3. High automation, stability and operation online
High automation, small size, light weight, safety and reliability. Installed with infrared liquid level automatic controller, the purifier machine will run automatically and easy handling.
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacture Co., Ltd. [China] |
|
|
|
|
|
[Sell]
GER-used engine oil regeneration system |
|
|
Product description
GER series Used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery’s lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.
You can reach us at sinonsh96@sino-purification.com to Evelyn Chen.
Features
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant.
2. Two main filtering systems can ensure the GER works continuously by batch.
3. Completely removing water and harmful gas from the waste oil and recovering the color of the treated oil as fresh oil.
4. Simple operation, safe and reliable.
5. Low operation cost and maintenance, replacement expenses.
6. Environmentally friendly, no acid used during operation.
7. Heat preservation material which can keep heating high efficient and lower operation cost.
8. High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
9. Exhaust gas processing system can treat exhaust gas quickly and efficiently and make operation more environmentally friendly.
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacture Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Vacuum Insulation Oil Purifier-VFD Double-Stage High-Efficiency |
|
|
Ⅰ. Relative Models
VFD-A Double-Stage High-Efficiency Vacuum Insulation Oil Automation Purifier
VFD-A Double-Stage High-Efficiency Vacuum Insulation Oil Regeneration Purifier
VFD-A Double-Stage High-Efficiency Vacuum Insulation Oil Purifier with Tester
Ⅱ. Application
VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil. You can reach us at sinonsh96@sino-purification.com to Evelyn Chen.
Ⅲ. Description
VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it add ROOTS vacuum system, second stage of separating system to improve the effect of purification. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
Ⅳ. Features
1. Effective and efficient Dehydration (Degassing) System
2. High precision Filtering System
3. Powerful double stages vacuum system
4. Electrical apparatus controlling System
5. High quality components
6. Diverse design in the structures and functions. The machine is available in mobile or stationary options. Various sizes and configurations (alloy shield) available.
Ⅴ. Available Style
1. Fixing type, mobile type with four wheels and mobile type with trailer
2. Normal appearance type, shelf-covering type and explosion-proof type
3. Available in deferent color.
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacture Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Single Billet Hot Shear Furnace China |
|
|
| Welcome to visit jtfurnace dot com. Single Billet Hot Shear Furnace is the pre-process using by al extrusion, and mainly used in heating billet, using gas spurt heating and hydraulic hot shear assemble. Its production flexibility, high auto degree, better operation environment and low energy consumption. It makes up of five parts: Store and push feed machine, spray heating furnace, hot log shear, transport machine, electrical appliance. Advantages: 1 Diameter: 70-320mm 2 Length: 6000-8500mm 3 Store billet quantity of back material shelf:5 5 Temperature uniform: 5 Degree Celsius 6 Fuel: NG 8500kcal/m3 7 Consumption: 25-45m3/h 8 Production rate: 60-100s/time 9 Sheared billet length: 350-1000mm 10 Total water consumption: 1T/H 11 Air compress consumption: 0.6m3/min 12 Combustion blower: 5.5-15kw 13 Smoke exhaust blower: 7.5-22kw 14 Bydraulic station motorpower: 22-45 kw 15 Heating zones: 2-7 Detailed product specifications, please email to us jtfurnace at hotmail dot com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
940nm IR Day Night Weatherproof Sony CCD Camera 540TVL |
|
|
Model No:JBS-BRF03
Feature:
1.)IR Day/Night Waterproof Bullet Camera
2.)1/3inch Sony Color SuperHAD II Low Lux CCD
3.)SONY SS11&Next Chip&HQ1&Effio-E DSP
4.)Allows better picture quality and full function control
5.)540TVL High Resolution (680TVL/420TVL optionl)
6.)Low Sensitivity:0 Lux(Infrared LED On,at F1.2)
7.)Outstanding signal to noise ratio better than 48dB or 50dB
8.)Compact function for Shutter/Auto; BLC/Auto; AGC/Auto
9.)Infra-red LED 5mm - 21 LED;(Fixed lens)
10.)Infra-red LED 5mm - 24 LED;(Vari-focal lens)
11.)20m~25m Visibility Range at Darkness
12.)IP67 Waterproof ;allow to test in underwater 3m
13.)Exterior focus adjustment, no need to open the housing
14.)Dual-glass anti-reflection & Cable protection bracket design
15.)Safety Glass, High Transparency for Light Penetration
16.)Infrared Spectrum:850nm or 940nm(invisible IR light) for selections
17.)Fixed lens (21pcs leds): F3.6~12mm optional
18.)Vari-focal (Auto-iris) lens (24pcs leds):V4~9mm & VA4~9mm optional
19.)True Day/Night OLP Switching function optional
20.)DC12V
21.)Dimensions:D60*L96.4(mm)
22.)Optional Color:Black
|
|
| » Posted by: JBSvision Industrial Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
High Resolution 940nm IR Sony CCD Camera 500TVL |
|
|
Model No:JBS-BRF01
Feature:
1.)IR Day/Night Weatherproof CCTV Cameras
2.)1/3 SONY Color SuperHAD CCD
3.)SONY SS11&SS11X&HQ1 Digital signal processor(DSP)
4.)Allows better picture quality and full function control
5.)High Resolution 420TVL,500TVL
6.)Low Sensitivity:0 Lux (Infrared LED On,at F1.2)
7.)Outstanding signal to noise ratio better than 48dB or 50dB
8.)Compact function for Shutter/Auto; BLC/Auto; AGC/Auto;
9.)Mini Size,Difference Color Selection
10.)Infra-red LED 5mm - 12 LED
11.)15m to 20m Visibility Range at Darkness
12.)Waterproof IP67, allow immersion in water under 2~3 meters
13.)Front Glass Anti-reflection Design
14.)Cable Protection Bracket Design
15.)Safety Glass, High Transparency for Light Penetration
16.)Infrared Spectrum:850nm or 940nm(invisible IR light) for selections
17.)Available housing colors:Red,white,silver,blue(optional)
18.)6.0mm fixed lens
19.)DC12V
20.)Dimension:45(D)*63(L) mm
21.)Weight:188g
|
|
| » Posted by: JBSvision Industrial Co.,Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
