|
|
|
|
|
|
|
[Sell]
NSH GER Engine Oil Regeneration System(Used Oil Purifier, Oil Treatment, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration,Oil Purification,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation) |
 |
|
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
NSH Product Catalogue
Engine oil regeneration series
GER Used Gas engine oil regeneration system
Insulation Oil Series
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Purifier
VFD-A Double-Stage Vacuum Insulation Oil Automation Purifier
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Purifier
VFD-T Double-Stage Vacuum Insulation Oil Purifier with Tester
VF Vacuum Insulation Oil Purifier
VF-A Vacuum Insulation Oil Automation Purifier
VF-R Vacuum Insulation Oil Regeneration Purifier
VF-T Vacuum Insulation Oil Purifier with Tester
Turbine Oil series
TF Turbine Oil Purifier
TF-A Turbine Oil Automation Purifier
TF-R Turbine Oil Regeneration Purifier
Lubrication Oil series
LV Lubrication Oil Purifier
LV-A Lubrication Oil Automation Purifier
LV-R Lubrication Oil Regeneration Purifier
Flame-resistant Oil series
FV Flame-resistant Oil Purifier
FV-A Flame-resistant Oil Automation Purifier
Explosion-proof series
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose
|
|
» Posted by: Sino-NSH Oil Purifier Manufacturing Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Turbine Oil Purifier(Oil Regeneration, Oil Purification,oil reprocessing.Oil purify, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration, Oil Treatment,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation) |
|
|
TF (turbine oil purifier,Oil Regeneration, Oil Purification,oil reprocessing.Oil purify, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration, Oil Treatment,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation)series oil filtration equipment is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contains large amount of water, vapor, impurities, sludge, dielectric and colloid
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operated in good condition
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil renewed
Turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacturing Co., Ltd [China] |
|
|
|
|
|
[Sell]
urbine Oil Purifier(Oil Recycling, Oil Purification, Oil Regeneration, Oil Purifying |
|
|
TF (turbine oil purifier,Oil Regeneration, Oil Purification,oil reprocessing.Oil purify, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration, Oil Treatment,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation)series oil filtration equipment is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contains large amount of water, vapor, impurities, sludge, dielectric and colloid
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operated in good condition
Contact person: Nicolas Yee
Contact Email: sinonsh116@sino-purification.com OR sinonsh116@163.com
Cell: 0086-13452342249
Fax: 0086-23-67725653
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacturing Co., Ltd [China] |
|
|
|
|
|
[Sell]
Lubrication Oil Purifier(lube Oil Regeneration, Oil Purification, oil reprocessing, Oil purify, Oil Recovery |
|
|
LV(lube oil purifier, Oil Regeneration, Oil Purification, oil reprocessing, Oil purify, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration, Oil Treatment,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation)series is suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system
Contact person: Nicolas Yee
Contact Email: sinonsh116@sino-purification.com OR sinonsh116@163.com
Cell: 0086-13452342249
Fax: 0086-23-67725653
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacturing Co., Ltd [China] |
|
|
|
|
|
[Sell]
Transformer Oil Purifier(Oil Regeneration, Oil Purification, Oil purify, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration, Oil Treatment,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation) |
|
|
VFD(insulation oil purifier,Oil Regeneration, Oil Purification, Oil purify, Oil Recovery,Oil Processing,Oil Filtering,Oil Filtration, Oil Treatment,Oil Recycling,Oil Restoration,Oil disposal, Oil Reclamation) series is mainly used to improve the properties of insulation oil. It can remove water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil filtration series is specialized in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil
Contact person: Nicolas Yee
Contact Email: sinonsh116@sino-purification.com OR sinonsh116@163.com
Website: sinonsh99.en.supplierlist.com
Cell: 0086-13452342249
Fax: 0086-23-67725653
Description
Model VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it adds ROOTS vacuum system, second stage of separating system to improve the effect of purification, to remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacturing Co., Ltd [China] |
|
|
|
|
|
[Sell]
Engine Oil Recycling System(Used Oil Purifier, Oil Regeneration, Oil Recovery) |
|
|
GER(Used oil purifier,oil regeneration, oil reconditioning,oil purification,oil reprocessing,oil treatment,oil recovery,oil disposal,oil filtration,oil filtering,oil reclamation,oil filters
) series engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly
Contact person: Nicolas Yee
Contact Email: sinonsh116@sino-purification.com OR sinonsh116@163.com
Website: sinonsh99.en.supplierlist.com
Cell: 0086-13452342249
Fax: 0086-23-67725653
|
|
| » Posted by: Sino-NSH Oil Purifier Manufacturing Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sharpening Stone & Mounted Wheel |
|
|
Sharpening stone & Mounted wheel
Our joint venture corporation specializes in manufacturing the high-quality vitrified bonded abrasives products. It is main products include the single side sharpening stones, double sides sharpening stones, super finishing stones, and sharpening stones used for rubber tapping knife and table knife. In addition, it also manufactures the mounted wheels used for the electric and pneumatic tools, and the non-standard abrasives products. We only manufacturer first-class quality products, our products are under the authorization of the world-famous companies, and we produce the high-quality sharpening stones and mounted wheels which the other factories cannot make.
Sharpening stones can be applied into the hand grinding, cylinder grinding and bearing super finishing. There are so many different types and application of the sharpening stone: double sides sharpening stone, sharpening stone used for the rubber knife, sharpening stone used for the finishing the grinding wheels, super finishing sharpening stone used for the bearing sets and other sharpening stones.
The mounted wheels are used for foundry grinding, grinding dies, oil nozzle and for operations on irregular parts of a workpiece. The bond used is vitrified one or resinous one.
Sharpening stones types include silicon carbide, aluminium oxide and other materials.
The main size are:
150*50*25mm 200*50*25mm 200*75*50mm 200*75*25mm 125*50*25mm
The special specs can be made for the customer's equirement.
Contact : Ms.Vicky
Marketing Manager
China Abrasives
tel : 86 371 67639843
fax: 86 371 67640066
email :caeczhao[at]hotmail.com
caeczhao[at]126.com
skype : vicky-nemo
|
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Mould , Molding For Cut-off Wheel , Grinding Wheel , Diamond Wheel |
|
|
MOULD
1.Various moulds for bond abrasives and diamond wheel
Straight,thin slice, cymbal,dish,straight cup,flaring cup,tapered one side,tapered two sides and cylinder.
2.Moulds for sharpening square stones and rectangular stones
3.Various moulds for segments
Convex,flat,flat-convex,convex-concave and trapezoidal
Please contact :
Marketing Manager : Vicky
China Abrasives
tel : 86 371 67639843
fax :86 371 67640066
email : caeczhao[at]126.com
MSN: caeczhao[at]hotmail.com
SKYPE: vicky-nemo |
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Silicon Carbide Plate ( Kiln Furniture , Refractory Plate ) |
|
|
Silicon nitride bonded Silicon Carbide Products
The series of advanced silicon carbide products include silicon nitride bonded silicon carbide blast furnace brick, kiln furniture(board, support), silicon carbide tube, bonded silicon carbide brick and silica bonded silicon carbide product. They are widely used in the field of nonferrous, metallurgical, electron, ceramic, mechanical and chemical industry series as furnace lining, blast furnace tuyere brick , deek, supporting column, pusher, flame-proof board, abrasive parts and heat exchanger tubes.
Recrystalized Silicon Carbide Products
Recrystalized silicon carbide products have high temperature strength, high thermal conductivity, good thermal shock resistance, they are resistant to a variety chemical elements, with a long life. It is the best material for modern high temperature equipment, play an important role in improving the quality of products, reducing production costs, saving energy and rising production capacity. Line of products: Recrystalized SIC furnace tools, including beams, bats, roller, nozzles, hollow board, thermocouple protective tubes, It is widely used in the field of high voltage insulators, porcelain, grinding wheels, and electronic ceramics.
Contact : Ms.Vicky
tel : 86 371 67639843
fax: 86 371 67640066
email : caeczhao[at]126.com
caeczhao[at]hotmail.com
skype : vicky-nemo
|
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Press Machine For Cut-off Wheel |
|
|
KILN FOR RESIN REINFORCED CUTTING AND DEFRESSED CENTER WHEEL
1. 35 meter long electricity channel kiln
It can contain 35kiln cars. Each car can load 400 pieces wheels. One baking cycle is 50 minutes.
2. 5.5 cubic meter hot wind cycle kiln
Can contain 8640 pieces of 100mm, 2160 pieces of 180mm,1200 pieces of 400mm.
PRESS FOR RESIN REINFORCED CUTTING AND DEPRESSED CENTER WHEEL
1. 8 working places cycle type automatic press
For making 300-400mm cutting wheel. The time for making one piece is 18-20 seconds.
2. 24-working places push type automatic press
For making 150-230mm x 2-4mm thickness wheel and one inner reinforced net or two outer reinforced nets. The time for making one piece is 9-12 seconds.
3. 32-working places push type automatic press
For making 100-125mm x 1.8-6mm thickness wheel. The time for making one piece is 7-9 seconds.
4. 42-working places push type automatic press
For making 100-125mm x 1.8-4mm thickness wheel. The time for making two pieces is 7-9 seconds.
5. 50-working places push type automatic press
For making 100-125mm various wheels. The time for making two pieces is 7-9 seconds.
The above presses are fixed dimension feed and mould. They are equipped with PLC to control the mechanical, electrical and hydraulic systems automatically working.
Marketing Manager : Vicky
China Abrasives
tel : 86 371 67639843
fax: 86 371 67640066
email : caeczhao[at]126.com
MSN: caeczhao[at]hotmail.com
SKYPE: vicky-nemo |
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Grinding Wheel |
|
|
We are China national abrasives corp(CHINA ABRASIVES CORP : CAEC), China largest abrasives, refractory and super-materials manufacturer and exporter ,an ISO9001 corp.
We can supply all kinds of grinding wheel ,if you need ,please don't hesitate to contact us .
Vitrified Bonded Wheels are made by vitrified bonded, Widely used for metallic and non metallic materials. Based on the different use, they are sorted into plane grinding,leather grinding,tubegrinding,coreless grinding,saw surface grinding,oily stone grinding etc.
Resinoid Bonded Wheels Series
Cutting on portable machines with depressed center wheels
Cutting on stationary machines
Cutting on portable with cut-off wheels
Special cut-off wheels for low power chop saws
Cutting on small pneumatic & electrical tool
Ms.Vicky ,
Marketing Manager
China Abrasives
tel : 86 371 67639843
fax: 86 371 67640066
MSN: caeczhao[at]hotmail.com
Email:caeczhao[at]126.com
skype: vicky-nemo |
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Mixer/HydraulicPress/Finishing Machines/Modules For Abrasive Industry |
|
|
MIXER
Mixing for resin wheel(twin tanks)and vitrified wheel (single tank)
120L twin tanks mixer
100L twin tanks mixer
200L single tanks mixer.
HYDRAULIC PRESS
1.630-2500KN four columns hydraulic press for making§ś200-400mm x 50mm wheel.
2. 3150-6300KN four columns hydraulic press for making §ś400-900mm x 50-200mm wheel.
FINISHING MACHINES
1. small side dressing machines to finish the wheel of diameter §ś400mm smaller. abnormity and straight wheel.
2. large side dressing machines to finish the wheel of diameter §ś500-1100mm abnormity and straight wheel.
3. Grinding machines for circumferential faces to finish the wheel of diameter §ś100-400mm and the max thickness 300mm abnormity and straight wheel 4. Vertical grinding machines to finish the wheel of diameter §ś600-1100mm with high precision.
MOUDULES
1.Various moulds for bond abrasives and diamond wheel
Straight,thin slice, cymbal,dish,straight cup,flaring cup,tapered one side,tapered two sides and cylinder.
2.Moulds for sharpening square stones and rectangular stones
3.Various moulds for segments
Convex,flat,flat-convex,convex-concave and trapezoidal
Marketing Manager : Vicky
China Abrasives
tel : 86 371 67639843
fax :86 371 67640066
email : caeczhao[at]126.com
MSN: caeczhao[at]hotmail.com
SKYPE: vicky-nemo
|
|
| » Posted by: CHINA ABRASIVES I/E CORP. [China] |
|
|
|
|
|
[Sell]
Printing plate |
|
|
We are the professional manufacturer of offset printing ps plate. Our ps plate includ Conventional Positive PS plate, Conventional Negative PS Plate and Positive Thermal CTP Plate.
material: High quality aluminium
size: Upon customer request
performance: Long run print
place of origin:China
|
|
| » Posted by: Jingyuan Industry Group [China] |
|
|
|
|
|
[Sell]
Dampening sleeves |
|
|
Our Dampening Sleeves are of three type: Cotton ,Polyester and Stretch. They are water shrinkable, fibrous composite covering for the Dampening roller or form roller of an offset printing press. It absorbs, stores and meters fountain solution from the vibrator roller to the plate.
Types:
Cotton
Polyester
Stretch
Size: 44＃-148＃
Packing : 25meter / box , 4/5/6boxes /Carton
|
|
| » Posted by: Jingyuan Industry Group [China] |
|
|
|
|
|
[Sell]
Numbering boxes |
|
|
Types:
Rotary Numbering boxes
Plunger Numbering boxes
Others Numbering boxes
Digits: 7,8,9
Feature:1.horizontal/vertical
2.Progressive/ Regressive
3.3/16"Gothic /Roman/Etc.
4.Notch of Adapter: standard (22mm) wild (27mm)
5.Arm with spring or not
Circumference：153mm(18.9"),171mm(21.1"),180mm(22.3"),210mm(26.0"),etc
Packing : 1PCS / box
|
|
| » Posted by: Jingyuan Industry Group [China] |
|
|
|
|
|
[Sell]
printing machine spare parts |
|
|
Printing machine Spare Parts for Heidelberg series, ManRoland series , KMORI series, Hmada series, Ryobi series, Mitsubishi series, KBA series, Muller series.
1. Nozzle
2. Heidelberg Spare Parts
Printing Machine:102V,102F,MO,SOKD,SOKDZ,CTOD and other series component. All fittings for single color and bicolor offset machines component ,high-speed printing plate clips, adhesive tape clips, chains, gears, eccentric copper sets, original FAG and INA plane bearings, gear-opener bearings, localization bearings, pull bearings, super blue nets of teeth pillow, ink brushes, sucking films, all kinds of water based varnishes, paper delivery belts, powder based films 20C-45C, etc.
3. ManRoland Spare Parts
Printing Machine: RUK3B,RVP2C,RZFOB,PVU5 and other series components. all kinds of wear parts, all kinds of special wear bearings, printing gears, gnawing gears, helical gears, wind pumps, carbon steel plates, carbon brushes for electric machine, carbon brush racks, queue chains, Marco cinque machines, Marco hexad machines, Marco paper machines, printing machine copper cups, adhesive tape clips, delivery bits, bite blocks, bite pillows, paper delivery bite blocks, sucking films, all standards of ink brushes , etc.
4. Others Spare Parts
All kind of KMORI series , Hmada series, Ryobi series, Mitsubishi series, KBA series, Muller series printing machine Spare Parts.
|
|
| » Posted by: Jingyuan Industry Group [China] |
|
|
|
|
|
[Sell]
Large heavy CNC machined parts |
|
|
10 Large heavy CNC machined parts
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com/Large-Heavy-Parts-manufacturers.html
As our advantage, we have full experience in project operation for large heavy parts and steel structures, which can be cut by CNC flame cut or laser cut, later it will be assembled and welded by TIG/MAG machine. Of cause the large heavy structures also need to be heat treated in order to release the inside stress before machining, and then it may be machined by gantry planing machine, large CNC milling machines, heavy lathes and large CNC grinding machine etc.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Aluminum rollers (idlers) |
|
|
09 Aluminum rollers (idlers)
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：84439920 Aluminum rollers
We’re specialized in producing aluminum alloy rollers in high quality. Aluminum rollers can be widely applied to all kinds of printing machines that work with high rolling speed, including printing packaging, plastics, electronics, etc. Aluminum alloy materials are 6063T5 and 6061T5 etc and it needs to be dynamic balanced and later the aluminum roller will be anodized in natural or black color.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Lift stands |
|
|
08 Lift stands
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：7308900000 Elevator parts
This is a sheet metal stands for America lift/elevator. We provide custom sheet metal fabrication parts equipped various PEM nuts, studs, screws and inserts with wet paint, powder coating or zinc plating treated. The sheet metal parts can be made by laser cut, CNC punching, die-stamping, spinning and roll forming etc.
stands
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Investment casting |
|
|
07 Investment casting
Hangzhou Fulai Mechanical Parts Co., Ltd.
http://www.mechanical-oem.com
HS Code：7325101000 Precision steel casting
This is an investment steel casting for an Italy customer. We provide various custom casting parts within precision CNC machining completely, and meanwhile we also have lots of casting sourcing such as die-casting, investment steel casting, precision stainless steel casting and aluminum injection etc.
|
|
| » Posted by: Hangzhou Fulai Mechanical parts Co., Ltd. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
