|
|
|
|
|
|
|
[Sell]
A Manufacturer and Supplier of Magnetic Separator--metallurgy machinery |
 |
|
Magnetic separator
Kunding Magnetic Separator is one of the most widely used machines for the dry or wet separation of fine particles of ferromagnetic mineral. This machine can be applied to resource recovery, wood industry, mines, ceramics, chemical industry, food industry and many kinds of mines such as magnetite, hematite and limonite.
Operating principle
Magnetic separation is based on the different magnetic properties between the ore minerals to separate either valuable minerals from non-magnetic gangue or magnetic contaminants or other valuable minerals from the nonmagnetic values. After the ore pulp flow into the chute, the ore particles enter the ore feeding area separately under the influence of the water flowing from the jet pipe. The ferromagnetic particles get together and become magnetic floc on the magnetic field there. After that, the magnetic floc move forwards to the magnetic pole and stick to the rolling cylinder. As the magnetic floc and the cylinder rotate together, the magnetic pole rolls alternately, so the gangue and nonmagnetic particles will be agitated, and fall off to be discarged with the pulp.
Features and advantages
1. simple structure
2. easy operation and maintenance
3. low energy consumption
4 fine granules
5. no magnetic flux leakage
|
|
» Posted by: China Kunding Mining Machinery Works [China]  |
|
|
|
|
|
[Sell]
Customizing and supplying Jaw Crusher,impact crusher,compound crusher,hammer crusher |
|
|
Jaw Crusher:
Kunding Jaw Crusher has absorbed advanced technology both at home and abroad, it is mainly used to reduce the run-of-mine ore down to a size suitable for transport and secondary crusher. The maximum compressive strength of the material to be crushed is 350MPA . Jaw Crusher is widely used in mines, metallurgical extraction, building materials, road construction, railway buildin, hydro project, chemical industry, etc.
Operating principle
The distinctive feature of this class of crusher is the two plates which open and shut like animal jaws. This machine is powered by the motor connected to belts. The two jaws are set at an acute angle to each other.When one jaw is pivoted periodically, it swings relatively to the other fixed jaw. Materials fed into the jaws are alternately nipped when the swing jaw moves close to the fixed one. When the swing jaw moves away from the fixed one, the crushed materials will be released to fall further into the crushing chamber. Eventually, the crushed materials fall from the discharge aperture.
Features and advantages
1.high reduction ratio
2.uniform granules size
3.simple structure
4.easy operation and maintainance
5. economical , energy-saving ,and environment-friendly
6. long service life
7.high efficiency
8. various capacity
9. wide range of choice
10.anti-clogging design
|
|
| » Posted by: China Kunding Mining Machinery Works [China] |
|
|
|
|
|
[Sell]
Selling High-frequency Screen--ore dressing equipment |
|
|
High frequency screen
Kunding High Frequency Screen is made of high-quality stainless plate and consists of vibration exciter, ore pulp distributor, screen frame, machine frame, suspension springs and sieve, etc. It's an essential equipment for screening fine materials. It is widely used in iron mine, tin, tungsten, tantalum and riobium sand.
Operating principle
Being different from ordinary screens, high frequency screen features high frequency which helps damage the surface strain of the pulp and slows the fine granules' high-speed vibration. Also, by virtue of high frequency, the separation of the useful ores of great density is accelarated, and the materials which are smaller than the separation size have more opportunities to contact the screen mesh. Thus the materials smaller than the operating size especially those of greater density will pass through the screen mesh with the pulp.
Features and advantages
1.simple structure
2.high efficiency
3.high screening rate
4.low energy consumption
5.anti-clogged design
|
|
| » Posted by: China Kunding Mining Machinery Works [China] |
|
|
|
|
|
[Sell]
Supplying Belt Conveyor |
|
|
Belt Conveyor
The belt conveyor manufactured by China Kunding Heavy-duty Machinery Co.,Ltd. can be .classified into several kinds, like fixed belt conveyor, extensible belt conveyor. It is applicable for materials’ successive transportation in mine and cement line to transport bulk materials and finished products. Besides, it also has a wide range of applications in matellurgical, coal, chemical, water&power industry With good commonality and changeability of components, there is no doubt that these mineral band conveyors supplied by our company can cut down on capital cost greatly and accelerate the schedule of projects. Moreover, covering area can be narrowed and investment cost reduced when it is used on the ground. Kunding belt conveyor : the belt length and other components used to assemble an integrated belt conveyor can be produced according to customers’ detailed requirements and gearing can be either electrical rollers or gearings with drivers. In accordance with transportation processes, it is available for mine owners or other people to use one or more belt conveyors transporting materials. The belt conveyor can be installed horizontally or aslope in order to meet the needs of different transporting lines.
|
|
| » Posted by: China Kunding Mining Machinery Works [China] |
|
|
|
|
|
[Sell]
Manufacturing and Supplying Ball Mill--mining machinery |
|
|
Ball mill
Kunding Ball Mill, an efficient tool for fine finishing, is made of fine materials skillfully. It can grind many kinds of ore and other materials, thus it is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, chemical materials, ore dressing, ferrous metal and non-ferrous metal, glass ceramics industries, etc.
Operating Principle
Ball mill consists of a horizontal cylindrical shell, provided with renewable wearing liners and grinding medium-steel balls. Inside the low-speed rotating shell, steel balls cling to the liner under the influence of inertia, friction and centrifugal force. Then they will be taken to a certain height and thrown down due to the gravity and centrifugal force. In this process, the materials continuously dropped from one end of the cylinder will be smashed by the balls. In adittion, both the balls and materials will be rolling and sliding irregularlly together. Therefore, the materials will become finer and finer.
Features and advantages
1. high efficiency and energy- saving
2. widely application
3. Easy and safe operation
4. Stable performance
5. Even product size
|
|
| » Posted by: China Kunding Mining Machinery Works [China] |
|
|
|
|
|
[Sell]
Stainless steel cut wire shot |
|
|
Stainless steel cut wire shot
304 Austenite Type z:
1,Chemical composition
C: 0.15%max
Cr: 16~18%
Ni: 6~10%Si: 1%max
Mn: 2%max
2, hardness: 32~52HRC
3, density: 7.8g/cm3
4, size 0.3~1.5mm
5, Durability: 7000 Times
430 Ferrite Type
1,Chemical composition
C: 0.15%max
Cr: 16~18%
Si: 1%max
Mn: 1%max
2, hardness: 32~52HRC
3, density: 7.8g/cm3
4, size 0.3~1.5mm
5, Durability: 7000 Times
410 Martensite Type
1,Chemical composition
C: 0.15%max
Cr: 11~13%
Si: 1%max
Mn: 1%max
2, hardness: 32~52HRC
3, density: 7.8g/cm3
4, size 0.3~1.5mm
5, Durability: 7000 Times
6, Packing:25kg/bag,40 bags/pallet
Required products with other chemical components by clients can also be provided.]
Contact name:joyce
Email:xinxuewen@163.com Tel:86-15266791621 Fax:86-0543-4579617
Msn:xinxuewen2010@hotmail.com skype:xinxuewen16 |
|
| » Posted by: Shandong KaiTai Industrial Technologies Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Stainless steel shot |
|
|
Stainless steel shot ：410 Martensite Type 304 Austenite Type z: 430 Ferrite Type
304 Austenite Type z:
1,Chemical composition
C: 0.15%max
Cr: 16~18%
Ni: 6~10%Si: 1%max
Mn: 2%max
2, hardness: 32~52HRC
3, density: 7.8g/cm3
4, size 0.3~1.5mm
5, Durability: 6500 Times
430 Ferrite Type
1,Chemical composition
C: 0.15%max
Cr: 16~18%
Si: 1%max
Mn: 1%max
2, hardness: 32~52HRC
3, density: 7.8g/cm3
4, size 0.3~1.5mm
5, Durability: 6500 Times
410 Martensite Type
1,Chemical composition
C: 0.15%max
Cr: 11~13%
Si: 1%max
Mn: 1%max
2, hardness: 32~52HRC
3, density: 7.8g/cm3
4, size 0.3~1.5mm
5, Durability: 6500 Times
6 Packing: 25kg/bag,40 bags/pallet
Required products with other chemical components by clients can also be provided.
Contact name:joyce
Email:xinxuewen@163.com Tel:86-15266791621 Fax:86-0543-4579617
Msn:xinxuewen2010@hotmail.com skype:xinxuewen16 |
|
| » Posted by: Shandong KaiTai Industrial Technologies Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Steel cut wire shot |
|
|
Shandong KaiTai Industrial Technologies Co., Ltd. is the biggest manufacturer of metal abrasive in China which has developed 8 series including cast steel shot, cast steel grit, steel cut wire shot, stainless steel shot, stainless steel cut wire shot, aluminum shot, zinc shot, copper shot, all together 80 kinds of abrasive products. The company could produce 150,000 tons metal abrasive per year. Having a fixed asset of 450 million Yuan (RMB) and with a yearly turnover of 1000 million Yuan (RMB), Kaitai Steel Shot Abrasive Co., Ltd. is in charge of overseas sales of steel shot, steel grit.
Steel cut wire shot: CW1.0 CW1.5 Hardness: CW1.0 51-53 HRC CW1.5 41-45 HRC1, Density: 7.8g/cm32,Chemical composition:C 0.45-0.75%
Mn 0.40-1.20%
Si 0.10-0.30%
S: 0.04 % max
P: 0.04 % max
3，Packing:25kg/bag,40 bags/pallet
Contact name:joyce
Email:xinxuewen@163.com Tel:86-15266791621 Fax:86-0543-4579617
Msn:xinxuewen2010@hotmail.com skype:xinxuewen16 |
|
| » Posted by: Shandong KaiTai Industrial Technologies Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Sell steel shot |
|
|
cast steel shot :S780/SS2.5 S660/SS2.0 S550/SS1.7 S460/SS1.4 S390/SS1.2 S330/SS1.0 S280/SS0.8 S230/SS0.6 S170/SS0.5 S110/SS0.3
1,Chemical Compositions:C: 0.70-1.20%
Mn: 0.60-1.20%
Si: 0.40-1.20%S: less than 0.05%
P: less than 0.05%
2, Average hardness ( 500g loading )Normal: 40-50HRC (377-509HV)Special: 52-56HRC (543-620HV)Special: 56-60HRC (620-713HV)
3, Hardness deviation: Max deviation3.0HRC (40HV)
4, Metallography structure: Even tempered martensite and dispersed carbon
5, Min density ( Alcohol replace testing) :7.4g/cm3
6, High strength, long lasting Ervin life: Cast steel shot: 2000~2800 cycles7 Packing: 25kg/bag,40 bags/pallet
8Cast steel shot is used for blast cleaning of shot blasting machine, steel pre-treatment, steel structure.
Contact name:joyce
Email:xinxuewen@163.com Tel:86-15266791621 Fax:86-0543-4579617
Msn:xinxuewen2010@hotmail.com skype:xinxuewen16 |
|
| » Posted by: Shandong KaiTai Industrial Technologies Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Shot Blasting Machine- Q37 Series Overhead Rail Spinner Hanger |
|
|
Shot Blasting Machine- Q37 Series Overhead Rail Spinner Hanger
This series for the hook type shot blasting cleaning machine, is mainly used for casting. Structural, non-ferrous alloy parts and other parts of the surface cleaning, shot blasting cleaning machine of this series at a single hook, double hook-type, lifting and no lifting style and many other models. It has the advantages of no pit, compact structure, and high productivity.
Style model size of work piece being cleaned/mm the carrying capacity
diameter×height of unit hook/kg
single-hanger Q375 500×1000 500
single-hanger Q376 800×1200 600
double-hanger Q376E 800×1200 600
single-hanger Q378 1000×1500 800
double-hanger Q378E 1000×1500 800
single-hanger Q3710 1200×1500 1000
double-hanger Q3710E 1200×1500 1000
single-hanger Q3720 1500×2000 2000
single-hanger Q3730 1500×2000 3000
single-hanger Q3750 2000×2500 5000
Contact name:joyce
Email:xinxuewen@163.com Tel:86-15266791621 Fax:86-0543-4579617
Msn:xinxuewen2010@hotmail.com skype:xinxuewen16 |
|
| » Posted by: Shandong KaiTai Industrial Technologies Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Shot Blasting Machine- Q58 Piled and Released Type |
|
|
Shot Blasting Machine- Q58 Piled and Released Type
This series belongs to the hungering chains type continuous working overhead rail shot blasting machine, and it is mainly used for batch cleaning of small and medium castings, forgings, alloys, etc. They can eliminate sticky gravel and scale and other impurities on it, obtaining bright surface with certain rough degree, and improve decoration quality.
Piled and Piled and Piled and Piled and
Name Released Type Released Type Released Type Released Type
Shot Blasting Shot Blasting Shot Blasting Shot Blasting
Machine Machine Machine Machine
Q583 Q585 Q5810 Q588
cleaning work piecesФ800×1500 Ф800×1200 Ф1300×2800 Ф550×2200
Size (mm)
Number of work position 2 3 2 2
Quantity of impeller head 4 6 6 4
Impeller head
(kg／min) 4×250 6×360 6×330 4×480
impeller head power
（KW） 4×15 6×22 6×22 4×22
Max hanging weight (kg) 300 500 1000 800
productivity hanger／h 40 55 50 30
Cleaning work pieces 3062x1800 8500X1800 8500X 2300 6800X2600
Size (mm) x 2800 x 3885 x4800 x3325
total air rate volume
(m3／h) 15000 18000 18000 17200
Total power (except
For dust cleaning) KW 74.5 186.85 186.85 121.05
Appearance 13250x4750 17000x4750 17650x6025 16000x4750
Dimension (mm) x 6820 x 8760 x 9323 x 9200
Contact name:joyce
Email:xinxuewen@163.com Tel:86-15266791621 Fax:86-0543-4579617
Msn:xinxuewen2010@hotmail.com skype:xinxuewen16 |
|
| » Posted by: Shandong KaiTai Industrial Technologies Co., Ltd. [China] |
|
|
|
|
|
[Sell]
high-speed computer gravure press |
|
|
Use:
This machine is suitable for multi-colour coce-through continuous printing for such roll film materials with excellent printing performance as BOPP, PET, PVC, PE, aluminium foil and paper, etc.
Performance and Characteristics:
1.Every control module of the automatic colour register system is equipped with microprocessor and can correct the deviation of colour register quickly and accurately.
2. The main machine adopts frequency control of motor speed.
3. Eeleasing tension adopts full-automatic tension controller and magnetic powder brake.
4. Rolling adopts full-automatic constant tension and tracion coordinated with torque DC motor, double-station automatic turnover, replacing the material without stopping the machine.
5.Two-layer airproof structure for drying oven provides uniform wind flow, while specific cooling fin of stainless steel for heating tube provides energy-saving opportunity, uniform temperature as well as anti fire possibility.
6. Pneumatic system is adopted for press roller and traction roller.
7. Automatic ink circulation system is provided.
8. Air shaft is used for unwinding and rewinding shaft providing convenient assemble and unassemble possibilities.
9. It is provided with display of press line speed and accumulated length in meter.
10. Quality cast-iron structure for the whole set provides good stability and vibration absorbing capability.
Model
MDASY-600A
MDASY-800A
MDASY-1000A
Printing colors
8
Max.printing width
600
800mm
1000
Max.material width
650
850mm
1050
Max.printing speed
90-120m/min
90-120m/min
90-120m/min
Max.machine printing speed
150m/min
150m/min
150m/min
Wind and unwind roller diameter
Φ800mm
Φ800mm
Φ800mm
Inner diameter
φ76mm
φ76mm
φ76mm
Printing cylinder diameter
φ120～φ320mm
φ120～φ320mm
φ120～φ320mm
Precision
±0.15mm(wholeMachine)
±0.15mm(wholeMachine)
±0.15mm(wholeMachine)
Tension control
0～25kg/FullWidth
0～25kg/FullWidth
0～25kg/FullWidth
Total power
76kw
84kw
92kw
Machine weight
19000kg
20000kg
21000kg
Machine dimension
15200X2500X2500mm
15200X2900X2500mm
15200X3100X2500mm
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
flexographic printing machine |
|
|
YT Series Double-color Flexography Printing Machine
Application:
Introduce sensitization resin as flexible printing plate, suitable for printing such packing materials as polyethylene, polypropylene bag, cellophane and roll paper, etc. It is a kind of ideal printing equipment for producing paper packing bag for food, supermarket handbag, vest bag and clothes bag, etc.
Performance and Features:
1. Easy operation, flexible starting, accurate color register.
2. The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. Pneumatic printing cylinder lift and lower, it will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360 continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
Model
YT2600
YT2800
YT21000
Max. printing material width
600mm
800mm
1000mm
Max. printing width
560mm
760mm
960mm
Max. printing length
191-914mm
191-914mm
191-914mm
Max. diameter of roller
450mm
450mm
450mm
Printing speed
5-50m/min
5-50m/min
5-50m/min
Plate thickness
2.38mm
2.38mm
2.38mm
Total power
8kw
10kw
12kw
Weight of machine
1800kg
2000kg
2200kg
Machine dimension
2300×1860×2145mm
2300×2060×2145mm
2300×2260×2145mm
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
fully automatic plastic handle bag making machine(four functions) |
|
|
Brief Introduction:
This machine has four functions (soft loop handle bag, patch handle bag, poly draw handle bag, die cut handle bag). It is integrated with coupled with machinery, light, electronic and pneumatic.
Features:
1. Flexible soft loop handle and patch film feeding system, fully automatic. (patent)
2. Pre-sealing knife, heated on double sides and strong for fusing, to make the bags without deformation.
3. The sealing knife is made of high quality material and without deformation even heated by high temperature.
4. Newly design of sealing knife top lift and turn over system
5. It's designed by heating punching, and it's easy to cut off, the waster is excluded automatically.
Optional:
1. Single sheet folding unit. (connect or fission)
2. Top-folded continuously sealing device.
3. Pneumatic jumbo roll lifted device.
Type
MD-800ZD
Length size of bag making
250 -750mm
Width size of bag making
250 -600mm
Top-folding edge
50 -75mm
Bottom gusseted
20 -70mm
Speed of bag making
Soft loop handle bag 60pcs/min
Patch handle bag 60pcs/min
Poly draw handle bag 70pcs/min
Die cut handle bag 75pcs/min
Total power
13kw
Machine weight
3500 kgs
Machine dimension
8200x3100x 1870mm
Air compressor (not included)
6HP
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
computer-controlled multifunctional bottom-sealing machine |
|
|
multifunctional bottom sealing machine
with computer-control, frequency-conversion speed-regulation, phofocell tracking, automatic temperature-control, automatic counting and stop, this machine can do bottom-sealing and cutting for soft packaging laminated bags as well as PE film bags.
Model
MD-DF350
MD-DF500
Max. bag width
320MM
480MM
Max. bag length
999MM
999MM
Speed
40-200pcs/min
40-180pcs/min
power
4.2kw
6kw
Machine weight
800kgs
1000kgs
Machine dimension
2900X800X1000mm
2900X1000X1000mm
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
middle sealing machine |
|
|
Middle sealing machine
This machine is an ideal facility for producing trademark sheathes of cold drinks, biscuits, mineral water, and batteries, suitable for middle sewing in production of middle-sealing and solid bags among plastic film bags
1. Auto error correction for unreeling
2. Dual-air swelling shaft reeling
3. Optional glue applying device for trademark sheath (thermal shrinkage film)
4. Auto constant temperature control for hot sealing
Model
MD-ZF250
MD-ZF300
Max. width
250mm
300mm
speed
35m/min
35m/min
power
2.2kw
2.5kw
Machine weight
500kgs
700kgs
Machine dimension
2800X1050X1100mm
2800X1050X1200mm
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
automatic plastic shoe cover machine |
|
|
Machine Description:
PE Automatic Plastic Shoe Cover Machine is one automatic production machine of producing elastic plastic shoe cover, per-minute output is up to 30-50pcs. it is suitable for hospitals and clean industry.
it can finish products from raw materials into the expected completion with a continuous line of automatic equipment, required a person to feed.
1, High output, small size, do not take up space
2, Program computer-controlled, photoelectric detection devices, reliability and high-performance
3, Automatic tension control, debug hot electric welding.
4, Finished appearance beautiful fashion
5, The whole machine with steel structure
6.Suitable material:PE film
Mechanical main configurations:
1,Quartet Steel iron frame, material frame (surface silver-white color and electro coating)
2 Equipped with a set of wearing parts and a set of toolbox
Suitable film: 20%-30% High-pressure plastic film together with 70-80% the low blow plastic film made.
Model
MD800
speed
30-50pcs/min
size L*W
400x160mm, special sizes could made according to customer’s requirements
voltage
220v,1p
power
3.5kw
Machine dimension(L*W*H)
2500x2000x1200mm
Machine weight
1100kg
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
disposable glove making machine |
|
|
Automatic Electronic High-speed HDPE Disposable Gloves Making Machine
Use: Glove is made by HDPE film, which widely used in medical, restaurant and food filed for it's convenient and healthy.
Characteristic:
1.It adopts micro computer contact screen to control, three-phase mixing motor to pull material; and producing piece number can be set up freely.
2.It is suitable for all kinds of moulds, easy operation.
3.Individual in-feeding device
Model
MD500
Max.width
200-450mm
Max.length
240-380mm
Making speed
50-150pcs/min
Main motor
1.5kw
Machine dimension
2600X1100X1400mm
Weight
600kg
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
film folding machine |
|
|
Usage:
This machine is one part of the heat cutting machine set, suitable for folding BOPP sheet with such functions as automatic gluing, pearly-lustre film laminating, hobbling and longitudinal sealing(used together with super sonic generator) and opening breaking of roll material.
Technical data:
Model
MDZB1200
MDZB1400
MDZB1600
Max. width of base material
1200mm
1400mm
1600mm
Dia of jumbo roll
650mm
650mm
650mm
Max. roll speed
90m/min
90m/min
90m/min
Total power
1.5kw
2kw
2.5kw
Outline dimension
2400x1500x1500mm
2600x1700x1600mm
2800x1900x1700mm
Weight
800kg
900kg
1000kg
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
[Sell]
computer control heat cutting bag-making machine |
|
|
MD-RQL Computer control heat cutting bag making machine
1.Materials: BOPP, OPP, thermal contraction film, etc.
2.Microcomputer control, stepping motor driving.
3.double side sealing knife design, it can change the bag making type fast.(Flat knife and patterns knife)
4.double unwinding design, the roll can be changed rapidly.
Model
MD-RQL600
MD-RQL800
MD-RQL1000
Length of sealing and cutting
999mm
999mm
999mm
Width of sealing and cutting
580mm
780mm
980mm
Speed
40-130m/min
40-110m/min
40-80m/min
Total power
3kw
7kw
10kw
Outline dimension
3600X1200X1700mm
3600X1400X1700mm
3600X1600X1700mm
Weight
700kg
850kg
950kg
|
|
| » Posted by: ruian mingde machinery co., ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
