|
|
|
|
|
|
|
[Sell]
Series Zyd Double-stage Vacuum Insulating Oil Purifier |
 |
|
Chongqing ZN Oil Purifier Manufacture Co., Ltd
Contact Person: Kiki Li
Tel: 0086-23-86197060
Fax: 0086-23-86197078
Mobile: 0086-0-13206198868
MSN: liqiqi18@hotmail.com
Email: oilpurifier_cq@yahoo.com; oilpurifier.kiki@zhongnengcq.cn
Website: http://cqoilpurifier.diytrade.com
There's more machinery on our websites. Visit us online or call us today for complete product specs. Your inquiries are highly welcomed at any time, we are ready to make a response very soon.
APPLICATION:
ZYD is special for treating the used and old transformer oil, mutual oil, and switch oil. Comparing with the single-stage type, this machine adopts the double stages vacuum system, which can improve the machine's working vacuum value highly, so it can dewater, degas and remove the impurity more deeply and effectively. The dielectric value of treated oil is higher than 65KV. It is very suitable for the large electric insulation equipments.
|
|
» Posted by: Chongqing ZN Oil Purifier Manufacture Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Series Zyb Multifunction Vacuum Insulating Oil Purifier |
|
|
Chongqing ZN Oil Purifier Manufacture Co., Ltd
Contact Person: Kiki Li
Tel: 0086-23-86197060
Fax: 0086-23-86197078
Mobile: 0086-0-13206198868
MSN: liqiqi18@hotmail.com
Email: oilpurifier_cq@yahoo.com; oilpurifier.kiki@zhongnengcq.cn
Website: http://cqoilpurifier.diytrade.com
There's more machinery on our websites. Visit us online or call us today for complete product specs. Your inquiries are highly welcomed at any time, we are ready to make a response very soon.
APPLICATION:
ZYB is special for purifying and regenerating the old insulating oil. This machine is not only purifying the oil, also it can regenerate the seriously deteriorated insulating oil. The treated oil can be used again in transformer, and other insulation system. Meanwhile, this machine can be as a dryer and oiling machine for drying the electrical apparatus, and injecting the insulating oil into the transformer under the vacuum situation. So it is very suitable for electrical apparatus manufacture factory, power station, power supply department, transformer in railroad station and other departments.
FEATURE:
Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon from the oil effectively. It can make the seriously deteriorated oil reach to the normal index, like anti-oxides, acid- alkali, water-solubility. The performance and lifetime of insulating oil will be improved and extended awfully after purification and regeneration. This machine can be as a dryer and oiling machine for drying the electrical apparatus, and injecting the insulation oil into the transformer under the vacuum situation. All functions in the machine can run at the same time. Also they can be used separately. Operation is security and reliable.
|
|
| » Posted by: Chongqing ZN Oil Purifier Manufacture Co., Ltd [China] |
|
|
|
|
|
[Sell]
Series Zy Single-stage Vacuum Insulating Oil Purifier |
|
|
Chongqing ZN Oil Purifier Manufacture Co., Ltd
Contact Person: Kiki Li
Tel: 0086-23-86197060
Fax: 0086-23-86197078
Mobile: 0086-0-13206198868
MSN: liqiqi18@hotmail.com
Email: oilpurifier_cq@yahoo.com; oilpurifier.kiki@zhongnengcq.cn
Website: http://cqoilpurifier.diytrade.com
There's more machinery on our websites. Visit us online or call us today for complete product specs. Your inquiries are highly welcomed at any time, we are ready to make a response very soon.
APPLICATION:
This machine is special for purifying various of insulating oils including unqualified transformer oil, mutual inductor oil and circuit breaker oil etc. It is widely applied to areas of power station, transformer substation, railway, petroleum, chemical and metallurgy. Also it is the best choice for filling oil into power equipment and drying moisture of power equipment.
FEATURE:
This machine is small, hi-efficient, and convenient. And it can be operated with electrical, vacuum filling oil into the power equipment and drying moisture of power equipment. Distinctive remove-impurity technology, which filters the impurity through double FH trapezoidal network and absorbing by high polymer without the mechanical power. Bi-infrared liquid Duplex 3D evaporation technology, dewatering and degassing very effectively. Any insulating oil can be treated on-line at the working site.
|
|
| » Posted by: Chongqing ZN Oil Purifier Manufacture Co., Ltd [China] |
|
|
|
|
|
[Sell]
Series Zy Single-stage Vacuum Insulating Oil Purifier |
|
|
Chongqing ZN Oil Purifier Manufacture Co., Ltd
Contact Person: Kiki Li
Tel: 0086-23-86197060
Fax: 0086-23-86197078
Mobile: 0086-0-13206198868
MSN: liqiqi18@hotmail.com
Email: oilpurifier_cq@yahoo.com; oilpurifier.kiki@zhongnengcq.cn
Website: http://cqoilpurifier.diytrade.com
There's more machinery on our websites. Visit us online or call us today for complete product specs. Your inquiries are highly welcomed at any time, we are ready to make a response very soon.
APPLICATION:
This machine is special for purifying various of insulating oils including unqualified transformer oil, mutual inductor oil and circuit breaker oil etc. It is widely applied to areas of power station, transformer substation, railway, petroleum, chemical and metallurgy. Also it is the best choice for filling oil into power equipment and drying moisture of power equipment.
FEATURE:
This machine is small, hi-efficient, and convenient. And it can be operated with electrical, vacuum filling oil into the power equipment and drying moisture of power equipment. Distinctive remove-impurity technology, which filters the impurity through double FH trapezoidal network and absorbing by high polymer without the mechanical power. Bi-infrared liquid Duplex 3D evaporation technology, dewatering and degassing very effectively. Any insulating oil can be treated on-line at the working site.
|
|
| » Posted by: Chongqing ZN Oil Purifier Manufacture Co., Ltd [China] |
|
|
|
|
|
[Sell]
Cooking Oil Purifier/Oil Filter/Oil Recycle |
|
|
Chongqing ZN Oil Purifier Manufacture Co., Ltd
Contact Person: Kiki Li
Tel: 0086-23-86197060
Fax: 0086-23-86197078
Mobile: 0086-0-13206198868
MSN: liqiqi18@hotmail.com
Email: oilpurifier_cq@yahoo.com; oilpurifier.kiki@zhongnengcq.cn
Website: http://cqoilpurifier.diytrade.com
There's more machinery on our websites. Visit us online or call us today for complete product specs. Your inquiries are highly welcomed at any time, we are ready to make a response very soon.
Application
This type machine is mainly used for purifying used cooking oil. It dewaters, deodorize, and eliminate impurities highly effectively. According cooking oil nature, the used cooking oil includes high water, more acid matter, much impurity and offensive odor. This machine adopts Plate Pressure system can separate the sundry goods and water from the oil quickly and effectively. Then superadded two primaries filter and fine filter, it can remove impurities thoroughly. Next, the machine adopts highly vacuum system to dewater and deodorize. In addition, this machine use stainless steel filter element, it resists the acid in oil strongly. So, the used cooking oil was recycled by machine, it will become limpidity, golden color and fresh quality. |
|
| » Posted by: Chongqing ZN Oil Purifier Manufacture Co., Ltd [China] |
|
|
|
|
|
[Sell]
SINO-NSH LV Lubrication Oil Filtration Machine |
|
|
LV series oil filtration system are suitable especially for filtration and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
Other series products
VFD series transformer oil, branded oil, insulating oil filtration machine
TF series turbine oil ,hydraulic oil filration machine
GER series engine(motor) oil ,lubricating oil filtration machine
|
|
| » Posted by: SINO-NSH Oil Filtration&Recycling Plant Co., Ltd [China] |
|
|
|
|
|
[Sell]
Sell Steel Measuring Tapes |
|
|
[img]http://www.waynex.com/photo/HW01001A.jpg[/img]
Keywords:
Measuring Tape
Tape Measure
Measure Tape Supplier
Steel Measuring Tape
Ruler, 5 Metres x 3/4 inches
Promotional Measure Tapes
Gift Measure Tapes
Steel Tape, Hand Tools
China Measuring Tape Supplier.
Measuring Tape - 5M
HS Code: 90178000
Item No.: HW01001
Blade Size: 5M x 19mm
Graduation Type: In/Ft, Metric.
Certificates: EEC Standard Class-II
Material: Steel blade + ABS case
Descriptions: With belt-clip, stopper, and sling strap. Automatic rewind. Easy to lock and release. Perfect for promotion.
Imprint: LOGO printing available.
Packing: Each in a polybag, 12pcs per whitebox, 10 boxes per master carton.
Qty/CNT: 120pcs
G.W. / N.W.: 19 / 18 kg
Meas.: 45 x 24 x 31.5 cm
We are also specialized in OEM/ODM orders; Just give us your specific requirements and picture, we can make almost all kinds of measuring tapes for you.
Mr. Eddy Xiao
----------------------------
Waynex Industrial Company Limited
Address: 36 Fuqiao Rd. Ningbo 315000 China
Tel: +86 574 8736 2428
Fax: +86 574 8736 5498
Mobile: +86 159 5828 5395
Email: waynexco@gmail.com
Skype: xiaozuwei
MSN: waynexco@hotmail.com
http://www.waynex.com
|
|
| » Posted by: Waynex Industrial Company Limited [China] |
|
|
|
|
|
[Sell]
Sell Steel Measuring Tapes |
|
|
Keywords:
Measuring Tape
Tape Measure
Measure Tape Supplier
Steel Measuring Tape
Ruler, 5 Metres x 3/4 inches
Promotional Measure Tapes
Gift Measure Tapes
Steel Tape, Hand Tools
China Measuring Tape Supplier.
Measuring Tape - 5M
HS Code: 90178000
Item No.: HW01001
Blade Size: 5M x 19mm
Graduation Type: In/Ft, Metric.
Certificates: EEC Standard Class-II
Material: Steel blade + ABS case
Descriptions: With belt-clip, stopper, and sling strap. Automatic rewind. Easy to lock and release. Perfect for promotion.
Imprint: LOGO printing available.
Packing: Each in a polybag, 12pcs per whitebox, 10 boxes per master carton.
Qty/CNT: 120pcs
G.W. / N.W.: 19 / 18 kg
Meas.: 45 x 24 x 31.5 cm
We are also specialized in OEM/ODM orders; Just give us your specific requirements and picture, we can make almost all kinds of measuring tapes for you.
Mr. Eddy Xiao
----------------------------
Waynex Industrial Company Limited
Address: 36 Fuqiao Rd. Ningbo 315000 China
Tel: +86 574 8736 2428
Fax: +86 574 8736 5498
Mobile: +86 159 5828 5395
Email: waynexco@gmail.com
Skype: xiaozuwei
MSN: waynexco@hotmail.com
http://www.waynex.com
|
|
| » Posted by: Waynex Industrial Company Limited [China] |
|
|
|
|
|
[Sell]
Sell Block Making Machine HQT9-15(MSN:tyler_zeng@hotmail.com) |
|
|
My Email:tylerhxbm@gmail.com;
MSN:tyler_zeng@hotmail.com;
Skype:steven_zeng888;
Model Number:HQT9-15 fully automatic line concrete block making machine.
Special Features:
Includes:
Mixing system;
Batching system;
Forming system;
Elevator;
Finger cart;
Automatic cuber;
Packing system;
Curing room;
Technical data of block machine:
Pallet size:1350x720x25mm (bamboo pallets);
Cycle time:15 to 20 seconds;
Major vibration type:Table&ram vibration;
Power:42kW;
Virbration frequency:62Hz;
Rating pressure:15mPa;
Host machine weight:13.5T;
Dimensions:2900 x 2600 x 2950mm;
Virbration force:80kN;
Machine Room Area:200 square meter;
Factory Area:1000 square meter;
Workers/working day:6 to 8 workers;
Machine Output:
Item Specification qty/8 hours
Hollow block 390x190x190mm 17260pcs
Solid block 240x115x53mm 72000pcs
Porous block 240x115x90mm 36000pcs. |
|
| » Posted by: Hengxing Block Machine Co.,Ltd [China] |
|
|
|
|
|
[Sell]
SINO-NSH LV Lubrication Oil Filtration Machine |
|
|
LV series oil filtration system are suitable especially for filtration and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
Other series products
VFD series transformer oil, branded oil, insulating oil filtration machine
TF series turbine oil ,hydraulic oil filration machine
GER series engine(motor) oil ,lubricating oil filtration machine
|
|
| » Posted by: SINO-NSH Oil Filtration&Recycling Plant Co., Ltd [China] |
|
|
|
|
|
[Sell]
SINO-NSH VFD Transformer Oil purification Plant |
|
|
VFD insulating oil purification series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil purification series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Other series products
TF series turbine oil ,hydraulic oil purification plant
LV series lubricating oil ,machine oil purification plant
GER series engine(motor) oil ,lubricating oil purification plant
|
|
| » Posted by: SINO-NSH Oil Filtration&Recycling Plant Co., Ltd [China] |
|
|
|
|
|
[Sell]
wire nails from wirenails.net |
|
|
BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
　
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
concrete nails |
|
|
Flat and countersunk head, diamond point, smooth shank and flut shank.
Concrete nails application:
Concrete nails are widely used for concrete walls, stone and masonry structure and other building construction purpose.
Concrete nails packing:
(1). In small box of 100 pcs each, 10 such boxes in a medium box, then several of which in a carton.
(2). In small box of 1kg each, 20 boxes in a carton.
(3). Loose in carton of 20/25kgs net.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
BWG supplies flat coutersunk head cement nails.
Technical Info:
Head: Flat, countersunk type
Point: Diamond type
Shank: Smooth, Fluted, Twisted, Spiral.
Finish: Bright, Eletro Galvanized, Blacked, Blue
Size: Length 1"-4"; Wire Nail Dia. 2mm-4.2mm.
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
　
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
　
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
common round iron nails |
|
|
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
　
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
　
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Collated Coil Wire Nails |
|
|
board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted.
BWG supplies flat coutersunk head cement nails.
Technical Info:
Head: Flat, countersunk type
Point: Diamond type
Shank: Smooth, Fluted, Twisted, Spiral.
Finish: Bright, Eletro Galvanized, Blacked, Blue
Size: Length 1"-4"; Wire Nail Dia. 2mm-4.2mm.
Technical Info:
Nail diameter: #6, 7, 8, 10.
Nail length: From 13mm or 1/2 inches to 254mm or 10 inches
Material: C1022
Finish: Black, yellow zinc coated, blue plated, etc.
Head type: Pan, bugle, etc.
Thread type: Coarse or fine
Drive: Philips
Packing: In bulk or small packing according to the customers requirements.
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
galvanized square boat nail |
|
|
Technical Info:
Materials: Galvanized steel or copper coated
Shank Type: Square
Head: Conical Type
Uses: Commonly used in making of wood boat, etc.
Duplex head nails description:
Double headed, smooth shank, diamond shank, bright finish.
Duplex head nails application: Duplex head nails are used for temporary construction, such as form work or scaffolding. The double head on this nail makes it easy to pull out when forms or scaffolding are torn down.
Duplex Head Nails Size:BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and sidingTechnical Info:
Nail diameter: #6, 7, 8, 10.
Nail length: From 13mm or 1/2 inches to 254mm or 10 inches
Material: C1022
Finish: Black, yellow zinc coated, blue plated, etc.
Head type: Pan, bugle, etc.
Thread type: Coarse or fine
Drive: Philips
Packing: In bulk or small packing according to the customers requirements.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
http://www.wirenails.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Duplex Head Nails |
|
|
Duplex head nails description:
Double headed, smooth shank, diamond shank, bright finish.
Duplex head nails application: Duplex head nails are used for temporary construction, such as form work or scaffolding. The double head on this nail makes it easy to pull out when forms or scaffolding are torn down.
Duplex Head Nails Size:
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
BWG supplies shoot nails ranges from wire diameter: 3.2mm - 3.7mm
Nail Length: 32mm, 42mm, 52mm, 62mm, 72mm
Packing: According to customers’ requirements.
We supply shoot nails in various sizes.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
http://www.wirenail.net |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Concrete Nails |
|
|
Flat and countersunk head, diamond point, smooth shank and flut shank.
Concrete nails application:
Concrete nails are widely used for concrete walls, stone and masonry structure and other building construction purpose.
Concrete nails packing:
(1). In small box of 100 pcs each, 10 such boxes in a medium box, then several of which in a carton.
(2). In small box of 1kg each, 20 boxes in a carton.
(3). Loose in carton of 20/25kgs net.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
Technical Info:
Cut masonry nail is made of high-quality low-carbon-steel
Finish: Electric galvanized, hot dipped galvanized, blunt point and tapered shank reduce splitting
Sizes of Masonry Nail: 1"-4", 3d-20d
Packing: Bulk, box, bag, or according to customers’ requests
Uses: Cut masonry nail is mainly used for attaching wood to hinder block, mortar joints, brick walls, and fresh concrete |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Galvanized Roofing Nails |
|
|
BWG supplies quality roofing nails for binding of drywall to wood to secure the shingles.
Technical Info:
Nail Head Size(mm): 14mm/18mm/20mm/24mm
Head Type: Umbrella head, flat head
Roofing Nails Shank Type: Smooth shank, twisted shank
Finish: Galvanized, hot dipped
Specification:
1-1/2 x BWG8-BWG13
1-3/4 x BWG8-BWG13
2x BWG8-BWG13
2-1/2x BWG8-BWG11
1-1/2" - 3" x BWG 5-13
Packing: In carton of 20kg-25kg net each. Or in wooden case of 112lbs each, consisting of 16packets x 7lbs net each.
Uses: Roofing nails are mainly used for roofing, insulation and siding
BWG supplies furniture nails of various sizes, mainly used in furniture making, furniture repair, cabinet work, casings, etc.
Available in countersunk, checkered or plain head, diamond point, polished.
Application: Common round iron wire nails are used for general construction purpose, wooden cases and furniture.
Technical Info:
Commodity Name: Common Nails
Materials: Galvanized steel
Specifications: 3/8"-6", BWG4-20 for all kinds of round nails.
Packing: In wooden cases of 112lbs consisting of 16 packets x 7lbs net each. Or in cartons of 25kg net, or 20kg net, both palletized.
Technical Info:
Cut masonry nail is made of high-quality low-carbon-steel
Finish: Electric galvanized, hot dipped galvanized, blunt point and tapered shank reduce splitting
Sizes of Masonry Nail: 1"-4", 3d-20d
Packing: Bulk, box, bag, or according to customers’ requests
Uses: Cut masonry nail is mainly used for attaching wood to hinder block, mortar joints, brick walls, and fresh concrete BWG Wire Nails Co. provides quality iron wire processed nail products, used for general purpose applications as fasteners. Products include Roofing Nails, Fetter Ring Shank Iron Nails, Concrete Steel Nails, Flat Head Panel Pins, Shoot Nails, Common Round Iron Nails, Annular Thread Ring Shank Nails, Fine Iron Nails, Finishing Nails, Iron Brad Nails, Shoe Iron Tacks, Galvanized Iron Square Boat Nails, etc.
Finish can be: Polished, vinyl plated, blued, phosphated, hot dipped galvanized, temper hardened, electro galvanized or color painted. |
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
[Sell]
Shoot Nails |
|
|
BWG supplies shoot nails ranges from wire diameter: 3.2mm - 3.7mm
Nail Length: 32mm, 42mm, 52mm, 62mm, 72mm
Packing: According to customers’ requirements.
We supply shoot nails in various sizes.
Technical Info:
Materials: Galvanized steel or copper coated
Shank Type: Square
Head: Conical Type
Uses: Commonly used in making of wood boat, etc.
Collated coil nails are used in the industries of wood furniture, architecture, board package and fitment. Especially for the binding of batch woodwork and the parts which are not easy to be operated by manual hammer. It is the ideal successor to traditional manual bulk nail.
Features:
Collated coil nails can save time and labor;
It has strong penetrating power, beauty and long duration;
Using of coil nails can reduce labor intensity and improve production efficiency. Commonly, its efficiency is 30 times of that of manual operation.
Wire Coil Nails Technical Info:
Wire Diameter Available: 0.083", 0.099", 0.113", 0.120", 0.131"
Nail Length: 1-1/4" to 3-1/2"
Nail Shank Types: Smooth, screw, ring
Finish: Bright, vinyl coated, electro galvanized
Angle: 16 degree, 15 degree, 10 degree, 0 degree
Winding: Flat, conical
Nails: 200-400pcs/coil
Package: 20-60 coils/ ctns, 24-40ctns / pallet
Roofing Coil Nails Technical Info:
Angle: 15 degree flat or 16 degree conical.
Wire Diameter: 0.120"
Nail Length: 3/4" 7/8" 1" 1-1/4" 1-1/2" 1-3/4"
Shanks Type: Smooth.
Point: Diamond.
Finish: Bright, electro galvanized
Plastic Sheet Coil Nails Technical Info:
Angle: 15 degree flat or 0 degree flat.
Diameter: 0.113" 0.120" 0.131"
Nail Length: 50mm-100mm
Shanks: Smooth, screw, ring.
Point: Diamond.
Finish: bright, electric galvanized
BWG supplies steel finishing nails (headless nails) ranges from 16 to 125mm.
Technical Info: Cupped head, smooth shank, diamond point, polished surface.
Finish: Bright or electro galvanized
Uses: Headless finishing nails are used for furniture-making, interior or exterior upholstery.
Using of brad head nails greatly reduces the possibility of splitting when used in hard or brittle timber. This kind of nail is ideal for general joinery.
Features:
Small head allows for countersinking below wood surface for later filling to give smooth finished appearance. Brad head nails do not turn after driving. It only leaves a small hole for filling.
Technical Info:
Nails Length: 2"
Size: 6d
Bright finish.
Cupped brad head, smooth shank and diamond point.
Used on interior finish carpentry and trim.
|
|
| » Posted by: BWG Wire Nails Co. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
