|
|
|
|
|
|
|
[Sell]
S Type Cone Crusher |
 |
|
S Type Cone Crusher Description:
S series Spring cone crusher is appeared first in the world, and it is the most widely used and larger stock crushing equipment. After optimization, S series spring cone crusher's structure is more reasonable, with more advanced technical parameters and excellent performance in the manufacture, installation, use and maintenance.
S Type Cone Crusher Advantages and characteristics:
1, More crushing cavity. S series spring cone crusher has unique cavity design, users can choose crusher cavity type accords to their different requirements.
2, Dry oil-sealed dust. S series spring cone crusher has high efficiency dust-proof sealing structure with unique and reliable sealing effect, extending the replacement cycle of oil and service life of spare parts.
3, Special material. The special material in key parts is to support large efforts.
4, High capacity. Compared with other models, S series spring cone crusher has advantages of long crushing wall, large stroke and big crushing power. Material in the crushing chamber can be more effective fragmentized.
5, Low cost of daily operation and maintenance.
http://www.stonecrusherschina.com |
|
» Posted by: Shanghai Donglong Heavy Machinery Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Spring Cone Crusher |
|
|
Spring Cone Crusher Description:
Spring cone crusher is appeared first in the world, and it is the most widely used and larger stock crushing equipment. After optimization, S series spring cone crusher's structure is more reasonable, with more advanced technical parameters and excellent performance in the manufacture, installation, use and maintenance.
Spring Cone Crusher Working Principle：
Cone crusher consists of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, the motor drives the eccentric shaft shells to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.
Spring Cone Crusher Advantages and characteristics:
high productivity; high quality2. less machine stop time3. easy maintenance and low cost4. unique crushing ability in primary, secondary and tertiary crushing.
http://www.stonecrusherschina.com |
|
| » Posted by: Shanghai Donglong Heavy Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Impact Crusher |
|
|
Impact Crusher Description:
This series of impact crusher are designed for crushing ores and rocks with particle sizes less than 100-500mm and compression strength no more than 320MPa.It has a feature of big crushing ratio, high-efficiency crushing, cubic shape, selectable crushing, etc. It is widely used in highway, hydropower construction, and airport and building industries.
Impact Crusher Working Principle：
When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers affect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being re-crushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed to the required size and then discharged from outlet of the impact crusher.
Impact Crusher Advantages and characteristics:
Efficient and energy saving; special structure, connected without key; high chrome hammer, unique impact liner; cubic shape of product, adjustable output size; easy maintenance, reliable operation.
http://www.stonecrusherschina.com |
|
| » Posted by: Shanghai Donglong Heavy Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Jaw Crusher |
|
|
Jaw Crusher Description:
Jaw crusher series have features of big crushing ratio, uniform products size, simple structure, reliable work, easy maintenance and low cost. It is widely used in stone mining, metallurgy industry, building material, highway, railway, water conservancy and chemical industries. Various material with compression resistance less than 320MPa can be crushed.
Jaw Crusher Working Principle：
Jaw crusher’s working type is of moving and squeezing. The working principle is as follows: Jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Jaw Crusher Advantages and characteristics :Short toggle, low hanging, big swing angle, long useful life, easy maintenance, high reliability, etc.
http://www.stonecrusherschina.com |
|
| » Posted by: Shanghai Donglong Heavy Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Vibrating Feeder |
|
|
Vibrating Feeder Description:
Feeder series have two types: vibrating feeder (GZD) and linear feeder (ZSW).
Vibrating feeder series have two engines. Users can adjust vibrating frequency of feeder freely so as to completely control feeding speed and ensure smooth operation of production line. Linear feeder series have features of stable vibration, reliable operation and long service life.
It is widely used in crushing and screening plants of mining, construction materials, silicate and chemical industry.
Vibrating Feeder Working Principle：
The vibrating screen consists of screen box, supporting device, vibration exciter, transmission part, etc. The barrel-type vibration exciter is installed in the middle part of the machine. During normal operation, the vibration of exciter will drive the screen mesh fixed on the screen box vibrate, and then materials will be screened. The big and small materials fall from the upper side and lower side of the screen to get them separated.
Vibrating Feeder Features:The vibrating feeder has features of stable vibration, reliable operation and Reliability. In addition, GZD also can adjust the excitation force, change and control the flaw at any time, conveniently and stably .Vibration motor is of vibration source, with low noise, small power consumption and good adjustment.
Simple structure, reliable operation, convenient adjustment and installation, light weight, small size, easy maintenance, preventing dust pollution when using the closed structure of the fuselage. |
|
| » Posted by: Shanghai Donglong Heavy Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
900/1000-20 truck flap |
|
|
| 1,We can provide and supply all kinds of the inner tube and tyre flap with the high quality and compepetive price in all size such as natural truck flap 2,Tensile strength 7mpa 8mpa 10mpa Elongation:350% 400% 450% tyre flap weight width 600-9 0.65kg 160mm 650-10 0.65kg 160mm 700-12 1.1kg 170mm 650/700-16 1kg 165mm 750/825-16 1.1kg 180mm 825/900-16 1.4kg 185mm 650/700-15 1.1kg 170mm 750/825-20 1.6kg 185mm 900/1000-20 2.1kg 200mm 1000/1100/1200-20 2.3kg 210mm 1100/1200-20 2.8kg 230mm 1100/1200-22 3.1kg 230mm 1100/1200-24 3.1kg 230mm 1400-24 4.0kg 280mm 16/70-20 4.0kg 280mm 1400-20 3.5kg 280mm 23.5-25 9.5kg 500mm 26.5-25 11kg 510mm 17.5-25 5.5kg 350mm 20.5-25 7.5kg 410mm |
|
| » Posted by: QINGDAO JUNJIE TIRE CO.,LTD [China] |
|
|
|
|
|
[Sell]
Sell Alloy Nodular Cast Iron Rolls |
|
|
Alloy Nodular Cast Iron Rolls
A. Cr-Mo Indefinite Chilled Nodular Iron Roll
A1. Low Ni-Cr-Mo Indefinite Chilled Nodular Iron Roll
A2. Middle Ni-Cr-Mo Indefinite Chilled Nodular Iron Roll
Description:
1) Size: as requested
2) Hardness: as requested
3) Chemical Composition: as requested
These rolls are characterized by spherical graphite. Its mechanical properties are similar to that of alloy indefinite chilled rolls except that its strength is higher than the latter.
Application: Wire rod, structural steel and narrow-band strip mill.
|
|
| » Posted by: Jinan DaPeng Industry & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Sell Alloy Chilled Cast Iron Rolls |
|
|
Alloy Chilled Cast Iron Rolls
Description:
1) Size: as requested
2) Hardness: as requested
3) Chemical Composition: as requested
There is little free graphite in the body of these rolls, which have excellent hardness, outstanding property of wear-resisting. Its metallographic structures are nodular troostite and carbide.
Application: Minitype structural steel, wire rod, hot rolling sheet and leveling rolling mill, etc.
|
|
| » Posted by: Jinan DaPeng Industry & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Sell Duplex Spun-Cast Iron Rolls (Centrifugal) |
|
|
Duplex Spun-Cast Iron Rolls (Centrifugal)
Description:
1) Size: as requested
2) Hardness: as requested
3) Chemical Composition: as requested
The working layer of these rolls are characterized with tiny crystalline grain graphite. We can control the size, shape, site of graphite and carbide through adjusting alloy’s content and chilling. As the matrix can be converted from pearlite, bainite to martensite by combination of Mn, Cr, Ni, Mo, etc, together with existence of small amount of fine graphite, so that the roll's resistance to spalling, thermal crack and wear ability can be well enhanced.
Application: Minitype structural steel, wire rod, hot rolling sheet leveling rolling mill; plate of moderate thickness, etc.
|
|
| » Posted by: Jinan DaPeng Industry & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Sell Pearlitic Nodular Cast Iron Rolls (Centrifugal) |
|
|
Pearlitic Nodular Cast Iron Rolls (Centrifugal)
Description:
1) Size: as requested
2) Hardness: as requested
3) Chemical Composition: as requested
It is produced by addition of alloy Ni, Cr, Mo with method of special thermal treatment. Pearlitic nodular rolls have high strength, good thermal properties and resistance to energenvies as well as small hardness decrease of working layer.
Application: Square billet/Slab pusher, large and medium structural steel, wire rod and narrow-band strip mill.
|
|
| » Posted by: Jinan DaPeng Industry & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Sell Bainitic Nodular Cast Iron Rolls (Centrifugal) |
|
|
Bainitic Nodular Cast Iron Rolls (Centrifugal)
Description:
1) Size: as requested
2) Hardness: as requested
3) Chemical Composition: as requested
It is produced by addition of alloy Ni, Cr, Mo, Mn, etc. Bainitic nodular cast iron rolls are characterized by acicular unit (pearlite+little martensite) matrix with higher strength and toughness than that of pearlitic nodular rolls. This kind of roll can be produced by static casting or centrifugal casting.
Application: Square billet/Slab pusher, large and medium structural steel, wire rod and narrow-band strip mill.
|
|
| » Posted by: Jinan DaPeng Industry & Trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
gear reducer |
|
|
| We are the manufacturer of transmission equipmet.Our product can meet all your requirements,please contact us without hestitate |
|
| » Posted by: Hzgear Sinodrive Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Shock Absorption Type Demister Pad |
|
|
Material: 302,304,304 L, 316,316 L, 317
Specifications are as follows:
Model : 20-40, 30-80, 40-120,50-120
Common diameter: 0.21mm
Weight capacity: 168 Kg/m3
Specific surface area: 529.6 m2/m3
Porosity: 0.9788
http://www.demisterpad.net
|
|
| » Posted by: Yingdu Demister Pads Co. [China] |
|
|
|
|
|
[Sell]
High Efficient Demister Pad |
|
|
Material: 302,304,304 L, 316,316 L, 317
Specifications are as follows:
Model: 60-100 80-150 200-400 80-100 90-150
Common diameter : 0.12-0.45mm
Weight capacity: 128 Kg/m3
Specific surface area: 403.5 m2/m3
Porosity : 0.9839
Specification List of Filter Mesh
Model Specification Wire Diameter
mm Materials Area/Weight
m2/kg Technical Notes
High Efficience Model 60-100 Model
80-100 Model
90-150 Model
200-400 Model
60-100 Model
80-100 Model ¢.012
0.1x0.3
0.1x0.3
0.1x0.3
0.1x0.3
¢0.1-0.15
0.1-0.15 stainless steel wire
stainless steel wire
stainless steel wire
stainless steel wire
polyamide fiber
polyamide fiber 1/0.6
1/0.6
1/0.6
1/0.6
http://www.demisterpad.net
|
|
| » Posted by: Yingdu Demister Pads Co. [China] |
|
|
|
|
|
[Sell]
Standard Type Demister Pad |
|
|
Material: 302,304,304 L, 316,316 L, 317
Specifications are as follows:
Model :40-100 60-150 ,140-400
Common diameter :0.20-0 .45 mm
Weight capacity: 168 Kg/m3
Specific surface area: 529.6 m2/m3
Porosity : 0.9788
Specification List of Filter Mesh
Model Specification Wire Diameter
mm Materials Area/Weight
m2/kg Technical Notes
Standard 40-100 Model
60-150 Model
140-40 Model
40-100 Model
40-100 Model
40-100 Model
40-100 Model 0.1x0.4
0.1x0.4
0.1x0.4
0.27
0.1x0.4
0.25
0.2 stainless steel wire
stainless steel wire
stainless steel wire
gal. iron wire
copper wire
polyamide fiber
PVC fiber 1/0.5
"
"
1/0.7
1, For 40-100 model: 40 holes in 100% width
2, Metal filter mesh can be processed into weaves type
http://www.demisterpad.net
|
|
| » Posted by: Yingdu Demister Pads Co. [China] |
|
|
|
|
|
[Sell]
Wire Mesh Demister |
|
|
Wire Mesh Material: Stainless steel wire, nickel wire, copper wire, galvanized wire, iron wire, monel wire.
Demister of wire mesh pad is also known as mist eliminators or sprays. This is a kind of high efficiency separation devices, used throughout all kinds of process industries, to remove liquid droplets from gas or vapor streams.
Wire mesh demister pads are used in chemical, petroleum, sulfate, medicine, light industry, metallurgy, machine, building, construction, aviation, shipping and environment protection. Demister pad is mainly used to eliminate streams with diameter of more than 3μm to 5μm.
Features of Wire Mesh Demister:
1. Simple structure with light weight.
2. Less pressure drop and big surface.
3. High demisting efficiency.
4. It is convenient for installation, operation and maintenance.
5. Long service life. http://www.demisterpad.net
|
|
| » Posted by: Yingdu Demister Pads Co. [China] |
|
|
|
|
|
[Sell]
Demister Pads |
|
|
Materials: Stainless steel wire, copper wire, galv. wire, MONEL wire
Wire Dia.:0.08-0.5mm
Demister Pads, also known as Mist Eliminator, Mist Screen and Socks, are manufactured according to customer's specifications.
A demister or mist eliminator is an entrainment separator used for efficient entrainment of liquids or mist removal in any Liquid - Gas / Vapor processing operation. It is a tailor-made product specially designed and manufactured out of knitted wires. When properly applied, it can achieve 99.97% separation of entrapped liquid in a vapor stream.
Demisters are utilized in petroleum refining, petrochemical industry, gas chemistry, synthetic chemistry, salt and sugar manufacturing and other chemical industries. They are also employed in packed towers, dust arrestors and air filters in various enterprises, or for chemical-reaction acceleration by painting the filament surfaces with catalyst (in both separation and reaction). Other applications include the special gasket in cabinets of electronics instruments and vibration and sound insulation. http://www.demisterpad.net
|
|
| » Posted by: Yingdu Demister Pads Co. [China] |
|
|
|
|
|
[Sell]
Inverter CO2 mig welder PCB(main board) |
|
|
| Inverter CO2 mig welder main board Product Description NBC series of PCBs with precision welding voltage pre-set current pre-set wire feeder slow manual feeding wire arc melting Consumers self-locking ball electronic reactance overheating protection high stability and electronic brake wire feeder functions. Gas welder can meet various need |
|
| » Posted by: Highshine Industrial & trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Tig/mma welder pcb |
|
|
| tig/mma welding machine pcb Descriptionss: ZX7-STG ZX7 series PCBS and an increase of the necessary high-voltage arc welding control early unaspirated lag die automatic self-locking current attenuation functions. When the welding arc can be used scratch can be applied in high-pressure arc. Achieve a multi-purpose machine. |
|
| » Posted by: Highshine Industrial & trade Co.,Ltd [China] |
|
|
|
|
|
[Sell]
metal display |
|
|
• Unique design with 19inch LED light box for advertisement
• Metal display stand in elegance design, pretty attractive
• Print your Brand, Company Name on this display rack, which is the best tool for promotion. You can boost the sales and raise your brand awareness in effective cost.
• Various material, color and dimension available
• Knock down structure, economic transportation cost
• Easy to assemble and maintain
• Widely used in locations such as retail shop, store or supermarket shopping mall entrance, business building, library gate and hotel.
• Customized solutions are accepted
• Optional treatment: Plating, painting, Powder coating, brushing, polishing and etc
|
|
| » Posted by: Winnsen Industry Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
