|
|
|
|
|
|
|
[Sell]
Series DMTFP Portable Transit Time Flow Meter |
 |
|
Series DMTFP Portable Transit Time Ultrasonic Flow Meter is a state-of-the-art universal transit-time flow meter designed using MultiPulseTM technology and low-voltage broadband pulse transmission, feature the worlds advanced non-invasive flow measurement technology providing a measuring system with unsurpassed accuracy, versatility, ease of installation and dependability. Although designed primarily for cleaner liquids, the flow meter can reliably measure liquids containing moderate amounts of suspended solids or aeration. DMTFP is designed for long- or short-term flow measurement surveys on full-pipe liquid systems and is ideal for verifying calibration of permanently mounted flow meters of all types.
Features:
◆Advanced DSP and MultiPulseTM Technology
◆40-hour battery (rechargeable), back-lit 4 lines letters display all integrated into a rugged, watertight enclosure.
◆cost-effective and versatile
◆Providing SD card data logger functions. The SD card capacity can be up to 8GB.
◆ Works reliably in both clean and somewhat dirty liquids.
◆Lightweight and easily transportable in case
◆4-20 mA, OCT pulse (flow rate or total flow) output as standard output
◆ Optional Heat flow BTU function, two temperature transmitters 4-20ma input for inlet and outlet temperature display and heat flow rate, total heat flow display.
Applications:
◆Water, including hot water, chilled water, city water, sea water, etc.◆Sewage and drainage water with small particle quantity.◆Oil, including crude oil, lubricating oil, diesel oil, fuel oil, etc.◆ Chemicals, including alcohol, acids, etc.◆Solvents◆Beverage and food processors◆HVAC hot and cool water, water /glycol solutions.◆ Water and waste treatment◆ Power plants, heat energy boiler feed water.◆Energy consumption supervision and water conservation management◆Metallurgy and miming applications (e.g., acid recovery)◆Marine operation and maintenance◆Pulp and paper industries◆Pipeline leak detection, inspection, tracking and collection◆Energy measurement and balancing◆Network monitoring |
|
» Posted by: Dynameters Shanghai Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Series DMTFH Handheld Transit Time Flow Meter |
|
|
Series DMTFH Handheld Transit Time Ultrasonic Flow Meter is carefully designed so that it is very compact and easy to use. A user can use hand to hold as well as to operate the flow meter main unit .The user-interface is self-explanatory and very easy to follow. Besides, the unique clamp-on fixture design makes the installation very simple and no special skills or tools required .Due to the non-intrusive nature of the clamp-on technique, there is no pressure drop, no moving parts, no leaks and no contamination.
Features:
◆carefully designed so that is very compact and ease to use.
◆Advanced MultiPulseTM Technology
◆convenient for mobile measurement, flow rate calibration, data comparing, meters running status checking
◆Wide liquid applications
◆Provides Data Logger functions. The capacity is based on how much the users selected, and maximum can reach to 8GB.
Applications:
◆Water, including hot water, chilled water, city water, sea water, etc.◆Sewage and drainage water with small particle quantity.◆Oil, including crude oil, lubricating oil, diesel oil, fuel oil, etc.◆ Chemicals, including alcohol, acids, etc.◆Solvents◆Beverage and food processors◆HVAC hot and cool water, water /glycol solutions.◆ Water and waste treatment◆ Power plants (nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.◆Energy consumption supervision and water conservation management◆Metallurgy and miming applications (e.g., acid recovery)◆Marine operation and maintenance◆Pulp and paper industries◆Pipeline leak detection, inspection, tracking and collection◆Energy measurement and balancing◆Network monitoring |
|
| » Posted by: Dynameters Shanghai Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Dynameters DMTFW Ultrasonic Water Meter |
|
|
Series DMTFW ultrasonic water meters utilizes newest digital transit-time processing technology, with compact shape featuring longevity, good stability and high accuracy for all-electronic industrial environment. The meters contain no moving parts and don’t need any external power, with the character of low power consumption. The meters are designed for easy installation. Even users don’t need to set parameters. The meters have the same dimensions with industrial water meter but can be used just as conveniently as normal water meters.
Features：
◆With compact, solid shape, suitable for bad environment conditions.
◆No moving parts, no pressure loss or abrasion.
◆Low start-up flow rate，minimum measurable flow velocity 0.003m/s，long-term stability.
◆Self-adapting ultrasonic receiving circuit, can work normally and stably even when pipe is with scaling or corrosion.
◆Quick transient response, can trace the flow rate change within seconds (superior to electromagnetic flow meters).
◆With Infrared meter reading function.
◆Battery power supply，can work constantly for 6 years.
◆Unique housing design, can work underwater.
◆Flange is made by mold to remove possibility of leakage.
◆With self-diagnosing function and fault indicator.
Main advantages:
◆High measurements precision
◆Long-term stability over a wide range of measured values
◆High operational reliability and minimum maintenance requirements (maintenance-free meters)
◆Compared to mechanical meters, very low hydraulic losses
◆Easy data reading, storage and evaluation/processing
◆Identification of leaks in water distribution systems
◆Installation at locations here no external power sources are available
◆Measured data transfer to remote control stations
Applications：
◆Process control and instrumentation.
◆Substituting mechanical flow meters with high measuring reliability.
◆Technological measurements of instantaneous flow rate and consumption in water-supply networks. |
|
| » Posted by: Dynameters Shanghai Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Manufacturers & Exporters of High Quality Tractor Drawn Soil Preparation Agriculture Implements,Agricultural Machinery,Farm Equipments,Farm Machinery and Tractor implements like : Cultivators,Tiller, Disc Harrows, Disc Plough, Rotary Tiller,Rotavator, |
|
|
Manufacturers & Exporters of High Quality Tractor Drawn Soil Preparation Agriculture Implements,Agricultural Machinery,Farm Equipments,Farm Machinery and Tractor implements like : Cultivators,Tiller, Disc Harrows, Disc Plough, Rotary Tiller,Rotavator, Sub Soiler, Land Leveller, Tractor Trailer,Trator Trolley,Mould Board Plough and All Tractor Accessories
With Regards
SUNNY AGARWAL
+91-9215900688
09729375105
Email: darpanagarwal188@yahoo.co.in
Manufacturers,Supplier,Distributors & Exporters of Agriculture Machinery Spares,Agricultural Equipments Spares,Farm Equipments Spares,Farm Machinery Spares and Tractor implements Spares Like Rotary Tiller Blade,Rotavator Blade,Power Tiller Blade,tractor Pto Shaft, Cultivator Tyne,Tine,Shovel,Tiller Springs, Harrow Disc,Disc harrow,Farm Blades,MB Plough Blade,Tractor Trailer Hook,Tractor Trolley Hook, Seed Drill Shovel,Duck Foot Mulcher Blade
With Regards
SUNNY AGARWAL
+91-9215900688
09729375105
Email: darpanagarwal188@yahoo.co.in
|
|
» Posted by: S.P.INDUSTRIES [India]  |
|
|
|
|
|
[Sell]
Round shank tooth with ISO 9001 Quality Certificate |
|
|
| Our company are various types of flat tooth,round shank tooth,welding bars,wall cutting tooth manufacturer and supplier. Our products are exported all over the world, with its high quality, excellent performance, stable job, reasonable price, fast delivery, well received by the users. |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
low price auger tooth |
|
|
| Our company are various types of auger tooth,flat tooth,roud shank tooth,welding bars,wall cutting tooth manufacturer and supplier. Our products are exported all over the world, with its high quality, excellent performance, stable job, reasonable price, fast delivery, well received by the users. |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Grinding steel Rods in Rod Mills: |
|
|
Grinding steel Rods in Rod Mills:
Diameter:60-100mm
Length:2.5m-6m
Hardness:HRC40-55
Features:Steady hardness,straightness, and good wear resistance.
we have established and are establishing friendly good cooperation with some famous mines in the world,such as Anglo Gold,BHP,Erdenet Copper Corporation etc. So please inform us if you are interested in our products,we can discuss more on our business. |
|
| » Posted by: Shandong Huamin Steel Ball Joint-stock Co.,LTD [China] |
|
|
|
|
|
[Sell]
Grinding steel Rods in Rod Mills: |
|
|
Grinding steel Rods in Rod Mills:
Diameter:60-100mm
Length:2.5m-6m
Hardness:HRC40-55
Features:Steady hardness,straightness, and good wear resistance.
we have established and are establishing friendly good cooperation with some famous mines in the world,such as Anglo Gold,BHP,Erdenet Copper Corporation etc. So please inform us if you are interested in our products,we can discuss more on our business. |
|
| » Posted by: Shandong Huamin Steel Ball Joint-stock Co.,LTD [China] |
|
|
|
|
|
[Sell]
YMH-100PN Handheld/Siren/Alarm Megaphone |
|
|
| Megaphone/Portable Megaphone YMH-100PN: 1.power sourece: 12VDC(8*UM-3) 2. Max Output:120dB/1M 3.Current Consumption:1A Max 4.Service Lifetime of Siren:18h(Until 100dB/1M Output) 5.Two Tone:(1)Siren (2)talk(3)Whistle 6.Material:ABS Plastic 7.Size:225*225*355mm 8.Net Weight(Without Battery):900g 9.Transmission Distance:1500m |
|
| » Posted by: Ningbo Hongshuo Electronics&Appliance Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Forg Horn Megaphone YMH-809B Maritime Alarm |
|
|
| Megaphone YMH-809B: 1.power sourece: 9v DC(6*UM-2) 2. Max Output:112dB/1M 3.Current Consumption:1.5A Max 4.Two Tone:(1)forg horn (2)talk 5.Material:ABS Plastic 6.Size:200*200*345mm 7.Net Weight(Without Battery):1330g 8.Transmission Distance:1000m |
|
| » Posted by: Ningbo Hongshuo Electronics&Appliance Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Perforated Ducting |
|
|
Perforated Ducting Perforated metal can be made into perforated ducting in mild steel sheet from 6mm to 25mm thickness. Perforated in a parallel or staggered arrangement to meet your specific requirements. Various metal widths and lengths available. Finishes usually are offered in mild steel but can be galvanized or painted to customers order.
Stainless steel perforated ducting is available to satisfy health and safety requirements in the food and chemical industries.
A fine aperture is sometimes required in combination with high load bearing properties. A solution may be obtained by placing a thinner, finely perforated sheet on top of the thick plate, which has larger holes. Connection of the two is obtained either by tack welding, or, if the thinner sheet must be removed for cleaning purposes, countersunk screws are applied.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Louvers |
|
|
Perforated Size: From 0,4 mm. to 120 mm.
Sheet Thickness: From 0,4 mm to 12 mm. (depending on perforation)
Size: 2.000 mm. wide in sheets (depending on perforation).
1.500 mm. wide in roll (depending on perforation).
Material: AISI304, 316
Stainless Steel Perforated Metal is used in the manufacture of:
Basket Strainers
Duplex Strainers
Feed Distributors
Hammer Mill Screens
Strainers
Tee Strainers
Temporary Strainers
Trommel Screens
Vibrating Screeners, round and rectangular, & replacement screens and parts
Y-Strainers
Perforated stainless steel sheet is available in any thickness and material that sheet and plate is available in. The rule of thumb is that the hole size cannot be smaller than the material thickness. Open area ranges between about 30% and 40% are most common.
Standard sheet size is 4' x 10'. Other sizes, and with custom borders can be manufactured.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Stainless Steel Perforated Sheets |
|
|
Perforated Size: From 0,4 mm. to 120 mm.
Sheet Thickness: From 0,4 mm to 12 mm. (depending on perforation)
Size: 2.000 mm. wide in sheets (depending on perforation).
1.500 mm. wide in roll (depending on perforation).
Material: AISI304, 316
Stainless Steel Perforated Metal is used in the manufacture of:
Basket Strainers
Duplex Strainers
Feed Distributors
Hammer Mill Screens
Strainers
Tee Strainers
Temporary Strainers
Trommel Screens
Vibrating Screeners, round and rectangular, & replacement screens and parts
Y-Strainers
Perforated stainless steel sheet is available in any thickness and material that sheet and plate is available in. The rule of thumb is that the hole size cannot be smaller than the material thickness. Open area ranges between about 30% and 40% are most common.
Standard sheet size is 4' x 10'. Other sizes, and with custom borders can be manufactured.
Common hole sizes are 1/32", 1/16", 3/32", 1/8", 3/16", 1/4", 3/8" and 1/2", 3/4" and 1". Other hole sizes can be manufactured. Also available are decorative patterns.
Standard available sheet thicknesses are 20ga, 16ga, 11ga, and 3/16", 1/4", and 3/8". Alternate thicknesses can be manufactured.
Common materials are stainless steel (304 and 316), we also supply mild steel and aluminum perforated sheets.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Plates |
|
|
The perforated metal plate is a very special, highly utilized in industry, construction, in the manufacture of various products popular use such as garbage baskets, filters, etc. The wide variety of sizes, as well as the different openings or holes offer the user a wide range of options that will help to select the mesh precise to their needs.
Perforated plates are mostly manufactured in steel carbon, but also can be manufactured on a custom aluminum, stainless steel, galvanized steel, and so on.
It is a valuable material for processes of filtration, separation, equalization, compensation, among others. The metal plates are used for separation of grains, food, refrigeration, heating and air conditioning, grindings, laboratories, etc.
The perforated metal plate finds a great application in the decoration and display of goods, ornamental applications ranging from furniture and office supplies, ceiling, office divisions, ventilation windows or walls, lighting, decoration up in buildings of great design. Perforated plates give a touch of elegance and distinction compared to other materials.
Perforated plates can be offered in a variety of patterns and metal types. To order, the following factors are to consider:
Material (stainless steel, carbon steel, aluminum, etc.)
Caliber or thickness of the sheet.
Size of the strips (3 'x 8'-4' x 8'-3 'x 10'-4' x 10 'and 1 x 2 mts.)
Form and extent of perforating: Round square or oblong
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Metal Sheet |
|
|
We perforate a wide range of round, square, slotted, decorative and even odd shaped perforations from a numerous metal sheets. The most common percentage of open area is between 30% and 50% although more extreme open areas are available depending on the perforation. Some times the percentage open area has to be kept lower for increased strength and flatness of the perforated metal sheet especially when galvanising.
The maximum sheet thickness, which we can perforate up to, is 25mm, the most common thickness range for balustrade infill, cladding panels is between 1.5mm and 3.0mm although heavier specifications do away with having to frame the sheets with something like edging profile which we also supply.
How to Make Perforated Sheets:
The sheet is fed to the machine by means of a Roller System Mechanism. The die is preloaded on the machine. On feeding the sheet, the upper section of the machine starts stroking. The sheet is perforated as per the die and is advanced by the amount of the perforated pitch set on the machine, with the next stroke of the slide. This cycle of feeding and perforating continues automatically.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Embossed Metal Panels |
|
|
Standard Size: In sheets 2000 x 1000 mm.
Material: Produced in mild steel, aluminum, stainless steel, etc.
Applications: Metallic constructions and industrial uses.
Sheet Thickness: Varied according to patterns of embossing. From 1, 1.5, 2 and 3mm.
Embossed perforated metal sheet is ideal for industrial corridors, automotive defenses, making of platforms and stairs.
Melon seeds pattern:(Aluminum and stainless) |
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Metal Screen |
|
|
Perforated metal panels and screens for architecture can be used as balcony, partitions, façade, elevator cabinet and other parts of buildings.
Materials: Stainless steel sheets, aluminum or galvanized iron sheets.
Specify the following when order:
Materials;
Hole pattern;
Open area;
Strength;
Hole size and thickness.Typical patterns for perforated screen include slotted, embossed, diamond, square and round.Slotted perforated metal is produced in ferrous materials in plates, stainless steel or galvanized steel.
Oblong Slotted Perforated Metal Screen Information:
3.175 x 25.400 mm oblong slot
6.350 mm centers
Side Staggered
43% open
22 gauge steel
Length of oblong slots run length of sheet.
1/4" Slotted Perforated Metal Screen
6.350 x 38.100 mm slot
Every third bridge 4.763 mm wide
Other bridges 2.381 mm
67% open area of sheets
16, 18, 20 gauge steel
Length of slots runs width of perforated sheet.
Mesh sizes and plate thickness typical available:
Ф DE 1.2X5 D/C 7 X 7.5mm
Ф DE 2X14 D/C 14X21mm
Ф DE 2.5x20 D/C14X25mm
To:
Ф DE 5X20X D/C 16X44mm
Ф DE 8X20 D/C 25X46mm
Custom orders with gauges and sizes available.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Tube |
|
|
Perforated Metal Tubes are popularly used in filter products as support tubing, and sometimes it is used directly as filter tubes and cylinders for certain industries.
We supply perforated tubes to support the filter media in making of various filter elements. Using of perforated metal adds more strength and pressure resistance in filter flow.
Micron opening perforated metals are used as filters or screens itself in the screening of coal, gravel and ore; in the shifting and separation of food products and medical material, fine chemicals and oil. Made of quality stainless steel or carbon steel sheets, perforated filter tubes and cylinders can be made spiral welded or butt welded in a wide range of sizes.
Specify the following when you order perforated tubes from us:
Materials: stainless steel, aluminum, or other materials.
Hole pattern: Micron round, diamond and others.
Open area: It will determine the strength of the support tube and the filter flow.
Hole size and thickness: Various to meet different requirements for tubing strength and filtration.
The mostly used stainless steel perforated tubes include 304, 304L, 316, 316L. Carbon steel can also be used.
Hole patterns include round, square, hexagonal, oval and special openings.
The thickness of metal tubes perforated: 0.2mm to 15mm
Opening diameter: 0.2mm to 100mm
Processes involved in making of perforated tubes: Perforating, flattening, rolling, cutting, bending, edging, welding and finishing.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Decorative Perforated Mesh |
|
|
The perforated plate can be manufactured in various steels, measures, standard models and special designs that are tailored to the needs of each industry. Engineers, architects and designers also are finding increasingly uses for the metal plates perforated in various presentations of design and materials.
Decorative stainless steel perforated metal, non-magnetic, type 304 or 316. The type 316 provides greater resistance to corrosion, making it suitable for photographic industries, food, chemicals and shipbuilding.
Sheet thick with reinforced edges Tolerance in the size of the sheet metal + /-5mm
Dimensions: Square opening, Hex opening, Oblong, Special
Sizes of perforated sheets in stainless steel 304: 500x500mm, 1000x500mm
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
[Sell]
Perforated Metal |
|
|
Carbon Steel / Aluminum / Stainless Steel
Virtually every industry uses Perforated Metal Products and the list of applications grows daily. Perforated metal has a greater more predictable and accurate load bearing capacity than expanded metal or wire mesh. Perforated Metal is widely used in automotive, lighting, construction, agriculture, petrochemical, laundry, mining, military and acoustical applications.
Perforated metals contain hole patterns of varying sizes and shapes created by punching presses. Types of hole patterns include staggered rounds, centers and squares, straight square slots, round and line squares, round slot end and side staggered and hexagons.
Features of perforated metal compared with expanded metal and how to choose products between them:
Expanded metal is similar to perforated metal, but it has been cut, rather than punched, and stretched into a shaped framework. Materials out of which expanded metal is made include sheets of steel, stainless steel, aluminum, tin, copper and plastic. Flattened expanded metal has been cold rolled to reduce thickness and increase surface smoothness. Using expanded metal is an ecologically-minded approach, as it is elaborated from discarded raw material. Expanded metal is basically transparent, has high resistance and excellent mechanical properties and is an excellent conductor. Expanded metal can be made out of non-metal products such as plastic, which then makes it an insulator.
|
|
| » Posted by: Blatt Perforated Metal Co. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
