|
|
|
|
|
|
|
[Sell]
Professional supplier of Wall cutting tooth |
 |
|
| We can offer Betek code:BFZ07, BFZ09, BFZ16. Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 38-42HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. The complete tools are designed for all ground condition, for light, middle and heavy grounds including application in rocks, including round shank bit, holder, cutting teeth and roller bit. Place of origin Changzhou.China Application All ground condition Certification ISO9001:2008 Material ASTM4142 / 42CrMo Port of loading Shanghai |
|
» Posted by: Changzhou Prance Machinery Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
Water well drilling of Welding bars |
|
|
| We can offer Betek Code:BA50-26.5, BA50-29, BA55-22, BA70-38, BA90-54, BA90-35, BA90-42, BA60-32/2, BA80-31 etc. Alloy steel Body,made by material ASTM4142 or 42CrMo,heat treatment with 40-44HRC hardness, has high toughness and wearable character.Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects,Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate,a long service life and short tool changing times.Together with the parts supply assurance,a high daily production volume,and above-average economy is guaranteed. The complete tools apply for foundation creation, solid wall, water well drilling. Place of origin Changzhou.China Application Foundation creation,Solid wall,Water well drilling Certification ISO9001:2008 Material ASTM4142 / 42CrMo Port of loading Shanghai |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
LG450-H cold rolling mill 10-18 |
|
|
| LG450-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:250-480mm 2.wall thickness of rough tube:10-35mm 3.length of rough tube:less than 10000mm 4.outer diameter of finished products:219-450mm 5.wall thickness of finished products:6-28mm Technical parameter of machine 1.diameter of roller:1128/928mm 2.round trip length of operating frame:1208mm 3.round trip frequency of operating frame:20-50times/minute 4.feeding amount:2-12mm(single feeding) 5.swing angle of rough tube:41-52 degree(double turning) 6.material loading method:Side loading 7.continuous rolling:No 8.rolling lines:single 9.Power of main motor:DC motor 950KW |
|
| » Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Foundation creation of Flat tooth |
|
|
| Product Description Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 48-52HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. The complete tools apply for foundation creation, solid wall, water well drilling. We can design and make the products differently according to customer's requirement. More Product Features Standard: ISO9001: 2008 Productivity: 50000 PCS/Month Unit Price/Payment: Contact for Price Origin: China Packing: Wooden case or Iron case,Carton or Plastice box Min. Order: 500 Transportation: by sea |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Spring Steel Coil Wire |
|
|
1)Spring Steel Coil Wire
2)Diameter:0.25mm-1.2mm
3)Process:cold-drawing
4)Supface:Smooth
5)Tensile strength:(1200-2900mpa)
DIAMETER(MM) TENSILE STRENGTH(MPa) TORSIONS Min/360
0.30 3000-2010 20
0.45 2600-2200 20
0.60 2500-2110 20
0.80 2400-2010 20
1.00 2300-1960 20
1.20 2250-1910 20
1.40 2210-1860 20
1.60 2160-1810 20
1.80 2110-1760 15
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Low Carbon Steel Spring Wire |
|
|
Low carbon steel wire:
Wire diameter:6#-23#
Zinc coating:30-260g/m2
Tensile Strength:35-70kg/mm2
Coil weight:25kg/coil
Low carbon steel wire:
Low carbon steel wire also called galvanized iron wire,which including hot dipped galvanized wrie and electro galvanized wire.
Useage:This kinds of wire is extensively used in construction,making armoring cable,handicrafts,woven wire mesh,express way fencing mesh packaging of products and other daily usage.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
High Carbon Steel Spring Wire |
|
|
Materials for manufacture of high carbon steel spring wire: 60#, 70#, 75#, 72A, 72B, 82B, 65Mn
Wire diameter range: 0.2-12.0mm
Standard followed in producing high carbon steel spring wire: GB4357-89, DIN17223
Packing: In coils, wrapped by gunny cloth
Transport: Loading about 20tons in one 20's container
Finish: Black and galvanized surface
Application: High carbon steel spring wire can be widely used for rolling various precision springs.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Bright Spring Wire |
|
|
Bright Spring Wire
SINORAY spring wire is produced following ISO9000/CE standards.
Material applied for manufacture: 304, 304L, 316, 316L, high quality stainless steel.
Specification: Wire diameter is 0.025mm-5mm,detail specification can be produced according to customer' request.
Features: Bright spring wire offers uniform diameter, smooth surface, color white, durability, anti-
corrosion, acid resistance, high temperature resistance and difficult to wear, good toughness.
Applications: Spring wire is mainly used for making the mesh, screw, regenerated wire, steel cable, metal flexible tube, welding rod core, filter, spring and so on.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Spring Steel Wire |
|
|
SINORAY spring steel wires fall into all specifications, both galvanized and ungalvanized.
Spring Steel Wire Technical Info:
Material: Top quality steel wire rods produced by Anshan Iron and Steel Group 45#, 60#, 65#, 70#, 42A, 62A, 72A, 72B, 82B, T9A, 65Mn
Size range: 0.15mm-4.0mm
Tolerance: ±0.01mm
Standards: GB/T 4357, DIN17223, EN10270, JIS G 3521 and so on
Application: mechanical springs
Packing: according to customers' specific requirements
Tensile Strength: As per your detailed requirements.
Uses: Spring steel wire is used in bonnel springs , spring mattresses, sofa springs.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
316L Spring Wire |
|
|
316L stainless steel spring wire technical info:
Material: 316L
Wire diameter: 0.1-9.0mm
Features:
High elasticity and fatigue resistance
Stable helix with good cast
Uniform & beautiful surface condition
High strength
Good flatness
Uses: We produce various types of stainless steels spring wire for stainless steel spring makers.
Sizes: Different specs and different tensile strength are available according to users needs
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Stainless Steel Spring Wire |
|
|
Stainless Steel Spring Wire
Dia:0.7-15.0mm
Grade:316,304,201,202 etc
Finish:bright and matt
Packing:Coil,Spool,Bundle,etc
Stainless steel spring wire
Characteristics: Uniform and beautiful surface condition, stable linearity, excellent cast and helix, good coil-forming ability for the spring.
Diameter: 0.7mm-15.0mm
Grade: 316,304, 201,202 etc
Packing: coil,spool,bundle,wooden case etc
Application:Producted in accordance with the specifications of JIS, with stable linearity, excellent cast and helix, it can be widely used for rolling various precision spring.
Material Chemical composition
Grade C Si Mn P S Ni Cr Cu Mo Other
201 0.15 1 5.5-7.5 0.06 0.03 3.5-5.5 16-18 N<0.25
130M/202 0.15 1 7.5-10 0.06 0.03 4.00-6.00 17.0-19.0 N≤0.25
301 0.15 1 2 0.45 0.03 6.0-8.0 16.0-18.0
302 0.15 1 2 0.45 0.03 8.0-10.0 17-19
302HQ 0.08 1 2 0.45 0.03 8.5-10.5 17-19 3.0-4.0
303 0.15 1 2 0.2 ≥0.15 8.0-10.0 17-19 ≤6.0
303Cu 0.15 1 3 0.2 ≥0.15 8.0-10.0 17-19 1.5-3.5 ≤6.0
304 0.08 1 2 0.045 0.03 8.0-10.0 18-20
304H 0.08 1 2 0.045 0.03 8.0-10.0 17-19
304HC 0.08 1 2 0.045 0.03 8.0-10.0 17-19 2.0-3.0
304HCM 0.08 1 2 0.045 0.03 8.0-10.0 17-19 2.5-4.0
304L 0.03 1 2 0.045 0.03 9.0-13.0 18-20
304M 0.06 1 2 0.045 0.03 8.9-10.0 18-20
304N1 0.08 1 2 0.045 0.03 7-10.5 18-20 N0.1-0.25
305 0.12 1 2 0.045 0.03 10.5-13 17-19
305J1 0.08 1 2 0.045 0.03 11-13.5 16.5-19
309S 0.08 1 2 0.045 0.03 12.0-15.0 22-24
301S 0.08 1.5 2 0.045 0.03 19-22 24-26
314 0.25 1.5-3 2 0.04 0.03 19-22 23-26
316 0.08 1 2 0.045 0.03 10.0-14.0 16-18 2.0-3.0
316Cu 0.03 1 2 0.045 0.03 10.0-14.0 16-18 2.0-3.0 2.0-3.0
316L 0.03 1 2 0.045 0.03 12.0-15.0 16-18 2.0-3.0
321 0.08 1 2 0.045 0.03 9.0-13.0 17-19 Ti≤5
410 0.015 1 1 0.04 0.03 11.5-13.5
416 0.15 1 1.25 0.06 ≥0.15 12.0-14.0
420 0.26-4 1 1 0.04 0.03 12.0-14.0
410L 0.03 1 1 0.04 0.03 11.5-13.5
430 0.12 0.75 1 0.04 0.03 16-18
430F 0.12 1 1.25 0.06 0.15 16-18
631(ji) 0.09 1 1 0.04 0.03 6.5-8.5 16-18 AL0.75-1.5
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Oil Tapered Spring Wire |
|
|
Oil tapered spring wire has excellent performance which is not available in high carbon spring and music wire.
Oil tapered steel wire has superior strength and toughness. It will implement excellent elasticity, ductility, and better resistance against fatigue and deformation in various spring applications. Spring steel oil tapered wire provides spring makers of good coiling and relaxation under high tensile. Oil tapered wire is recommended to make the springs for repeated dynamic loads, including clutch springs.
Smaller size oil tempered spring steel wire is used for making mattress springs, auto springs, etc.
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Spring Wire |
|
|
(1)Standard:DIN17223-1-1984,EN10270-1,ASTM-A227,GB4357-89
(2)Size: 0.20mm-14.0mm
(3)multi-purpose in u
1. General introduction:
Raw material is rigorously selected and approved before put into processing while five main chemical compostion results shown as below:
C Si Mn P S
0.40-1.00 Max 0.35 0.30-1.50 Max 0.04 Max 0.04
onventional technique integrated with modern leading-ged equipment makes our finished products shines on comprehensive functioning and performance when
adoped.
For serving spring and wire form industry, high tensile strength is not the ultimate goal to pursue, but the balance of flexibility and tensile strength to prevent our wire
from deformed or broken up during winding in spring machine. In addition, for other usage, our products also have gained a sound reputation from the appliance as
controlling cable or connecting wire for automobile industry and hard needle. Hot-dipped and electro-galvanized spring wire available.
2. Range of application:
(1). mattress spring
(2). compression spring
(3). extension spring
(4). torsion spring
(5). mechanical spring
(6). wire forms
(7). core of controlling cable
(8). connecting wire
(9). hard needle
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Carbon Spring Steel Wire |
|
|
Materials applied for manufacture of spring steel wire: Q195,Q235,45,65,70, 72A, 72B, 82B, 65Mn
Diameter of carbon spring steel wire supplied: 0.3mm-6.0mm
Surface treatment: bright or galvanized
Technical Info:
Carbon steel spring wire Specifications:
1) Material: 60#, 70#, 75#, 72A, 72B, 82B, 65Mn
2) Diameter range: 0.15-12. 0mm
3) Standard: GB4357-89, DIN17223
Packing: In coils, wrapped by gunny cloth
Transport: Loading about 20tons in one 20's container
|
|
| » Posted by: SINORAY SPRING WIRE CO. [China] |
|
|
|
|
|
[Sell]
Foundation drilling of Replacement Teeth |
|
|
| Product Description Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 48-52HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. The complete tools apply for foundation creation, solid wall, water well drilling. We can design and make the products differently according to customer's requirement. More Product Features Standard: ISO9001: 2008 Productivity: 50000 PCS/Month Unit Price/Payment: Contact for Price Origin: China Packing: Wooden case or Iron case,Carton or Plastice box Min. Order: 500 Transportation: by sea |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
electric police car |
|
|
| Specifications of Electric Police Car Dimension 3000mm*1220mm*1750mm Wheel base 1350mm Wheel tread (front/rear) 1100mm Minimum ground clearance 150mm Rated voltage 48v Rated power 3kw Maximum speed 24km/h Climbing capacity 25% Distance range more than 80km Braking distance less than 3m Minimum turning radius 3m Overall weight 650kg No. of seats 6 |
|
| » Posted by: Jiangsu Imagine Electric Vehicle Manufacturing Co., Ltd [China] |
|
|
|
|
|
[Sell]
Bell Annealing Furnace |
|
|
| Welcome to visit jtfurnace dot com. Bell Annealing Furnace Advantages: 1.The steel cover uses the crosswise ripple form, with high strength, good thermal conductivity, tremor resistance, rapid thermal quench resistance. 2.The Seal compaction may use the manual bolt, may also use the hydraulic ram. 3.The heating cover insulation use all-fiber heat preservation, good insulation effect, reduce lifting weight, extend service life. 4.Strong heat circulation fan with two speed or variable frequency, long-term stable operation, fast heating, temperature uniformity 5.The autonomous system is advanced, high precision, and the automatic burner nozzle works reliably, may use PLC automatic control and the microcomputer animation demonstration portable cover furnace running status 6.Cooling cover add water to air cooling, to increase the cooling capacity. 7.Even hardness, bright color. Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
All ground condition of Diaphragam wall cutting |
|
|
| We can offer Betek code:BFZ07, BFZ09, BFZ16. Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 38-42HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. The complete tools are designed for all ground condition, for light, middle and heavy grounds including application in rocks, including round shank bit, holder, cutting teeth and roller bit. |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Aging Furnace |
|
|
| Welcome to visit jtfurnace dot com. Aging Furnace for aluminum alloy The aluminum production and processing into the aging treatment carried out to improve the mechanical characteristics of aluminum and the promotion of strength. The heating way may elect to use oil, gas, electricity. Advantages: 1. Optimizing the structure design. Available in single door or double door, do towline type or roller type. 2. The circulating fan uses squirrel-cage type double-suction high-volume blower. low noise, high efficiency, to achieve temperature uniformity of +-5. 3. When dealing with long profiles in the circulation air duct, set the time and temperature of the reversing mechanism, two-way thermal cycling. and promote the furnace temperature uniformity. Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
[Sell]
Hot Shear Furnace |
|
|
| Wlecome to visit jtfurnace dot com. Hot Shear Furnace is applied to many aluminum bars heating up half homogenization processing, the aluminum bar hot shearing, and apply to the use of matching extrusion machine. Advantages: 1. The equipment is mainly composed by the heating furnace body, enter bar shelf, retreat bar shelf, hot shear machine, electric control and so on.. 2. In the furnace, one time deposits many aluminum bars, the aluminum bar is long in furnace preheat interval, this heating way has certain homogenizing effect to the aluminum bar. 3. With the efficient production of stability, durability, ease of maintenance, comprehensive performance 4. The heating fuels: Fuel oil, producer gas, natural gas, liquid gas LPG, coal and other optional. 5. Prepares produces time: The fuel oil, the fuel gas with 2~4 hours, burns coal with 4~8 hours Detailed product specifications, please visit our website jtfurnace com. |
|
| » Posted by: Foshan Jutong Industrial Furnace Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
