|
|
|
|
|
[Sell]
Canneed SMM-200 Score Measure Microscope |
 |
|
Canneed "SMM-200 Score Measure Microscope" has been used in daily production control since many years worldwide, and it has shown many advantages in companrison with other methods. The sample end is put on a two dimensional platen, supported by measuring needle.The high definition
CCD camera system is used to take clear pictures of the groove bottom, which showed on the display.
The score residual and score depth and plate thickness can be measured.
SMM-200 Score Measure Microscope has a free working distance of about 8mm at the actual magnification of 50 X,The measuring repeatability is within +/0.002mm. |
|
» Posted by: Canneed Instrument (HongKong) Limited [China]  |
|
|
|
|
|
[Sell]
Canneed CSS-200 seam saw |
|
|
CANNEED "CSS-200 seam saw" is a special seam circular saw with double cut for can double seam inspections. The CSS 200 was specially designed for 2- and 3-piece cans. Also aerosol-cans may be sawed with this saw. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on VSM 6A Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
Technical data (changes reserved):
Sample can dia. : 45-260mm
Sample type : beverage, food, and aerosol cans
Saw blades: 80 x 22 x 0,5 mm , also available with 100 x 22 x 0,5 mm
Speed: approx. 1.000 r/min.
Power supply: 230 /115 V
Dimensions: L370×W340×H200mm
Weight : 20kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed STR-100 Seam Stripper |
|
|
The Canneed automatic "STR-100 Seam Stripper" is a sensible, affordable, teardown method to prepare the double seam teardown analysis. One fast, safe teardown operation without damaging or distorting the cover hook. Reduce teardown time for more frequent inspections. Tooling quick change in few seconds. Models are available for most common can sizes of beverage, food, and aerosol cans. When ordering, the end diameter and can height must be specified so that the appropriate change parts are included. Efficient cut and strip both aluminium and steel cans in a single motion. 10 seconds per can. Eliminates the repetitious actions by hand .
An important part of any seam evaluation is the actual teardown of the can seam to determine tightness or wrinkle rating.
Technical data (changes reserved):
Sample can dia. : 50-88mm, custom made up to ?160mm
Sample type : beverage, food, and aerosol cans
Power supply: 115 V/230V
Dimensions: 250 x 400 x 380 mm(W x D x H)
Weight: 16 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed CEBT-100 Buckle Tester for Can and end |
|
|
The "Canneed CEBT-100 Buckle Tester for Can and end" determines the exact pressure at which the Can and End begins to buckle. With 4 Measuring mode:
1. Buckle Bottom For Can
2. Peak Test For Free End
3. Missile Test For Free End
4. Peak Test For Seamed End
The sample is placed in the holder. After closing the door pressure is applied. Fast pressure increase up to the expected value, from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the can or end buckles. The maximum pressure value is shown in the display. Any can and end of varying dimensions may be tested: inserts are available that can be exchanged within seconds.
Feature:
*Industry Standard
*Program Logic Control System (PLC) Controlled
*LCD touch-screen Display
*Rs-232 Communications Capability
* Overload Protection
*Test Point For Calibration
*"speed of pressure increase"may be set
Technical data (changes reserved):
Measure range: 0-900 Kpa
Resolution: 1 Kpa
Rear Panel: RS232 serial output
Power supply: 115/230V/50-60Hz
Pneumatic supply: 10bar
Dimensions: 770 x 500 x 1100 (W x D x H )
Weight: 40 kg
|
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed ABT-100 Burst Buckling Tester for aerosol cans |
|
|
The "canneed ABT-100 Burst Buckling Tester for Aerosol Cans" is used to determine the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts.
At high pressures from approximately 22 - 28 bar, it may happen that deformations of the valve and a higher burst pressure.
Technical data (changes reserved):
Pneumatic supply: 5bar
Max. Working pressure: 40 bar
Max. diameter: all standard aerosol cans
Dimensions: 555 x 400 x 860 mm(W x D x H)
Weight: 50 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed KZJ-SST-2 Secure Seal Tester |
|
|
KZJ-SST-2 Secure Seal Tester
The "canneed KZJ-SST-2 Secure Seal Tester" is used to test seal integrity on the glass or plastic containers and cans. The KZJ-SST-2 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The KZJ-SST-2 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
KZJ-SST-2 is constructed from anodized aluminum, stainless steel, and plastic materials. The tester's rugged construction withstands production line abuse, yet is accurate enough for laboratory use.
Technical data (changes reserved):
Measurement range: 0-16 bar
Pneumatic supply: handling up to 200 bar inlet pressure,
Sample capacity : 330 mm height × 150 mm dia. max.
Dimensions: 320 x 380 x 720 mm(W x D x H)
Net Weight: 15 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed IDG Can Internal Diameter Gauge |
|
|
Canneed "IDG-100, IDG-200 Can Internal Diameter Gauge"
This unit serves for quickly checking the Internal Diameter of can. It is equipped with a calibration piece.
IDG-100 is for small diameter can ;
IDG-200 is for big diameter can
It is equipped with a digital dial gauge with "reset" and "preset" function, LCD display and data outlet for connecting the unit to a computer via multiplexer, if required.
Technical data (changes reserved):
Resolution: 0,01 mm
Power supply: Battery, SR-44, approx.5.000 h
Accuracy: 0.02mm |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed CLT-600 Leak Tester for can |
|
|
The canneed "CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath. The can is fixed to magnet disc plate and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. End and side seams visible.
A special parallel clamping system enables to measure different diameters and heights with one device. The clamping pressure and the test pressure may be set independantly.
The operator determines the period of time the cans are under water. If he switches the by-pass lever and presses the two button valves, the cans deaerate and are lifted out of the water.The whole test cycle is automated and is pneumatically controlled by pressure regulator valves.
Technical data (changes reserved):
Maximum test pressure: 4 bar
Max. diameter: 130 mm
Max. can height: 300 mm
Bath dimensions: 1500 x 600 x 500 mm (W x D x H)
Dimensions: 1500 x 800 x 800 mm(W x D x H)
Weight: 200 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed ELT-100 Leak Tester for End |
|
|
The "Canneed model ELT 100 Leak Tester for End"is used to determine the pressure at which ends buckle. This tester is also used to test for pin hole leaks in the tab score and rivet area.
The ELT 100 applies high pressure air to the product side of and end until the end fails. Leaking spots are made visible by revealing bubbles in the water bath. The failure of an end occurs either when the end buckles or when it starts leaking; leakage is generally caused by faulty scores or rivets.
The ELT 100 is easy to use. The test sample is placed on the Change Part, the water chamber is closed, and pressure is applied to the product side of the end. At some point the end will either buckle or start to leak. The pressure at which the failure occurs can be obtained from the front- panel mounted gauge, which incorporates a lazy hand for easy end failure recording.
Each end diameter or shape requires specially adjusted holders, which can be exchanged easily.
Technical data: (changes reserved)
Pressured air supply : 6 bar min. ,10 bar max
Max. test pressure : 6 bar max (adjustable)
Sample Capacity : 200mm dia max
Pressure gauge Range : 0 -1000 kpa,
Graduation :20 kpa
Dimensions : 600 x 420 x 600 mm L x B x H
Weight :approx.25kg
Water overflow bath size :10L |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed AXL-4000 Axial Load Tester |
|
|
The "canneed AXL-4000 Axial Load Tester" measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display.
Features
*Industry Standard
*Exceptionally Parallel Platens
*Durable Load Cell Design
*PLC Controlled
*LCD touch-screen Display
*Rs-232 Communications Capability
*Mechanical Overload Protection
*Display the max. and min. measuring value and average after several test.
Technical data (changes reserved):
Measure range: 3000 N
Resolution: 1 N
Rear Panel: RS232 serial output
Power supply: 115 V / 230 V, 50-60Hz
Max. can diameter: 80 mm
Max. can height: 160 mm
Dimensions: 500 x 400 x 600 mm (W x D x H )
Weight: 50 kg |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed EBT-100 Buckle Tester For Loose Ends |
|
|
The Canneed "EBT-100 Buckle Tester for loose ends" determines the exact pressure at which the end buckles. Any end of varying diameter may be tested: chang parts are available that can be exchanged within seconds.
The loose ends is placed in the holder. By the ring-like laying-on device the end is being fixed in its circumference. Close the door, Depress the "start" button. The "EBT-100 Buckle Tester" clamps the end firmly and thightly. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the end buckles. The maximum pressure value is shown in the display.
Thus very constant results may be achieved which are independent from a later seam process. In comparison to seamed ends the results differ by 0.3 to 0.8 upwards.
Feature:
*Industry Standard
* suit any end of varying diameter
* with piston supercharger, doubled the Pneumatic supply
*Program Logic Control System (PLC) Controlled
*LCD touch-screen Display
*Rs-232 Communications Capability
* Overload Protection
*Test Point For Calibration
*"speed of pressure increase" may be set
*display the max. and min. measuring value and average after several test.
Technical data (changes reserved):
Measure range: 0-900 Kpa
Resolution: 1 Kpa
Rear Panel: RS232 serial output
Power supply: 115/230V/50-60Hz
Pneumatic supply: 5bar
Max. can diameter: 80 mm
Max. can height: 160 mm
Dimensions: 520 x 460 x 750 (W x D x H )
Weight: 50 kg
|
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Canneed Flange width gauge |
|
|
The Canneed "FWG-100-d Flange width gauges" is designed to measure the flange width of open ended cans.The spring loaded can guides automatically position the can for fast, accurate, and repeatable measurements. Constructed of machined for corrosion resistance and long life. The base plate is stainless steel to extend the wear life of the surface. With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauges may be connected to a computer via a multiplexer.
Technical data (changes reserved):
Resolution: 0,01 mm
Sample Capacity
FWG-100-d: 50-90mm dia.
FWG-200-d: 50-200mm dia.
FWG-300-d: 50-300mm dia. bigger by order |
|
| » Posted by: Canneed Instrument (HongKong) Limited [China] |
|
|
|
|
|
[Sell]
Low cost used TADANO GT-550E crane truck |
|
|
MODEL : GT-550E
Original place: Japan
YEAR:2005
CAPACITY : 55 TON at 3.0m
ENGINE:Nissan
Model..........NISSAN....PF6
CHASSISI: Nissan
Boom: 5-section,11.1m-42.0m
Extension speed: 30.9 m in 123 s
Jib Length: 9.0m and 14.6m
OUTRIGGERS
EXTENDED width
Fully.........6.800m
Middle....4.600m
Minimum....2.390m
Hydraulic Jack: 5
OVERALL LENGTH:13.48M
OVERALL WIDTH:2.82M
OVERALL HEIGHT:3.68M
Max.travelling speed: 83km/h
Gradeability:53% |
|
| » Posted by: Shanghai EnHua Construction Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
Architectural Decorative Mesh |
|
|
Architectural Decorative Mesh
Perforated metals make another trend of architectural decoration in a variety of opening shapes and materials. Suitable for many architectural and display uses. Compared with woven wire decorative fabrics, perforated screen sheet offers stronger and solid isolation.
Perforated Metal Screen Application:
For barriers, decoration, construction, autos, filter and other industrial uses.
Opening Patterns:
Slotted Opening;
Square Opening Metal Screen;
Round Opening Perforated Metal;
Micron Opening;
Decorative Opening
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
[Sell]
Decorative Wire Fabrics |
|
|
Decorative Wire Fabrics
Decorative wire mesh can be specially woven with super quality stainless steel, aluminum alloy, brass, copper or other alloy materials. Metal wire mesh fabrics are now catching the eyes of modern designers. It is widely used as curtains, screens for dining hall, isolation in hotels, ceiling decoration, Animal containment and security fencing, etc.
With it's versatility, unique texture, variety of colors, durability and flexibility, metal wire mesh fabric offers a modern decoration style for constructions. When it is used as curtains, it offers a variety of color changes with light and gives unlimited imagination.
Materials: Stainless steel, aluminium, copper, phosphor bronze, etc.
Aluminum metallic cloth is made of the sparking aluminium flakes in various colors. With the splendid decorative effect, they have applications for screen, divider , ceiling and window treatment etc at restaurant, hotel ,coffee bar.
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
[Sell]
Brass Decorative Mesh |
|
|
Brass Decorative Mesh
Brass mesh fabrics for decoration comes mainly in the form of woven wire mesh, sheets or grille.
Decorative meshes had been adopted more and more by the building field whatever on the material, structure or style because its beautiful metal color, concise style, good function, fashion and other more decorative elements.
With our rich production technical and experience, we are very pleased to supply you with all types decorative metal fabric products to meet your various application, furthermore, we will cooperate with you closely to design and development the new types to meet your requirements .
Brass Wire Fabrics for Decoration:
Patterns include chain link and creative weaving with wire and metal rod.
Application:
Wire mesh facades;
Shade screens;
Architecture ceilings;
Metal draperies for walls, partition and isolation screens;
Staircases isolation screen, elevator cabins screen;
Floor covering fabrics;
Other special uses.
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
[Sell]
Stainless Steel Decorative Mesh |
|
|
Stainless Steel Decorative Mesh
Decorative mesh has been adopted more and more by the building field whatever on the material, structure or style because its beautiful metal color, concise style, good function, fashion and other more decorative elements.
We can provide woven stainless steel wire mesh for architecture & decorations. Woven wire fabrics come in beautiful and unique designs, and these products are used mainly as decorative coverings for the whole buildings, walls, ceilings or floors.
Technical Description:
Name: Stainless Steel Decorative Wire Fabric
Materials: Made of stainless steel 304, 316 and 316L.
Features: Lasting, beautiful, being full of modern sense.
Applications:
Wire mesh facades;
Shade screens;
Architecture ceilings;
Metal draperies for walls, partition and isolation screens;
Staircases isolation screen, elevator cabins screen;
Floor covering fabrics;
Other special uses.
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
[Sell]
Woven Wire Drapery |
|
|
Woven Wire Drapery
Decorative wire mesh for architectures are popularly used in decorations of exhibition halls, hotels and luxurious room decorations as screens, also inside and outside decorations in superior office buildings, dancing halls, business halls, shopping center and sports center, ceilings, walls, stairs and railings. Decorative wire mesh fabrics offer certain protection in addition to the good decorative effects.
Woven wire cloth drapery can be made in the following materials:
Stainless steel, aluminium, copper, phosphor bronze, etc.
Woven wire decorative mesh is offered in a variety of wire diameters, styles and mesh openings. It is constructed of wires that are woven into a variety of unique patterns.
This wire mesh can be used for many applications with the following features:
1.Aesthetic appeal;
2.Versatile;
3. Architecturally inspired;
4.Variety of openings and sizes;
5.Unique design and appearance;
6.Style and functionality;
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
[Sell]
Decorative Mesh Curtains |
|
|
Decorative Mesh Curtains
Metal mesh curtains for decoration and architecture can be made in the following materials:Stainless steel, aluminium, copper, phosphor bronze, etc.
Woven metal wire decorative mesh is offered in a variety of wire diameters, styles and mesh openings. It is constructed of wires that are woven into a variety of unique patterns. This wire mesh can be used for many applications with the following features:
1.Aesthetic appeal;
2.Versatile;
3. Architecturally inspired;
4.Variety of openings and sizes;
5.Unique design and appearance;
6.Style and functionality;
Woven Wire Mesh Product Applications:
Infill Panels;
Ventilation grilles;
Security;
Privacy ceiling panels;
Sun Shades;
Shelving;
Facades;
Store Fixtures;
Partitions;
Other uses.
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
[Sell]
Ceiling Decorative Mesh |
|
|
Ceiling Decorative Mesh
Decorative mesh has been adopted more and more by the building field whatever on the material, structure or style because its beautiful metal color, concise style, good function, fashion and other more decorative elements.
We can provide woven stainless steel wire mesh for architecture & decorations. Woven wire fabrics come in beautiful and unique designs, and these products are used mainly as decorative coverings for the whole buildings, walls, ceilings or floors.
Technical Description:
Woven wire cloth for ceiling decoration can be made in the following materials:
Stainless steel, aluminium, copper, phosphor bronze, etc.
Features: Lasting, beautiful, being full of modern sense.
|
|
| » Posted by: Truji\'s decorative mesh manufacturing mesh co. [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
