|
|
|
|
|
|
|
[Sell]
reinforce bar steel welding machine |
 |
|
Function Characteristics:
Computer controls it when this machine welds wires, so welding time is accurate; the current is stable and less trouble.
Main Engine:
It adopts imported and famous pneumatic components, the life span of the machine is long, and welding wire is accurate, big pressure makes welding points firm.
Welding Transformer:
This machine equips typical and efficient transformer, which has 8-gear, so it enlarges welding range. Professional electrode makes the wear low; it also is used in many sides.
3.Sending Mesh System:
It is controlled by computer, the distance of weft could adjust steplessly, the hole change is setted by the program, it could exist different weft distances on one piece of mesh sheet.
Control System:
It adopts PLC program controller, the operation is convenient with touching screen, and it is easy to learn and use.
Fallen Wire System:
This system adopts patent technology, sending stuff one by one, it need not put wires by manual work.
Use of mesh sheet:
It is used widely in industry and construction, such as building board, the roof, the wall, the bridge, concreteroad, the floor, the airport, cement pipe, concrete prefabricated components, retaining wall, protection slope, the tunnel, the dock, the dyke and so on.
Technological parameter:
Warp Distance
50 100 150 200 250 300 350 400mm
Weft Distance
50--600mm
Welding diameter
5--12mm
Welding Speed
0--60 times/minute
electric currenty
1500kv/A
|
|
» Posted by: Joy Wire Mesh Machine Co., Ltd [China]  |
|
|
|
|
|
[Sell]
Sell automatic fence mesh welding machine JOY-DNW189A |
|
|
Function Characteristics:
This machine adopts electrical synchronous control technique, welding time and cent-control welding are composed of numeral and integrated electric circuit. This operation is accurate, it has stable function, firm welded point, and without welded tracks. Not only welded speed is fast, but also it is easy to learn and use. Step motor controls fallen weft, so it is even and accurate, the edge of mesh is regular; it is unnecessary to slice the side. Drawing mesh adopts the equipment with elastic tension link and fixing mesh, it is easy to regulate mesh hole, and mesh size is rather accurate
Use Of The Product:
1.Enclosure mesh and building roof mesh.
2.Building(reinforcing construction mesh, floor warming mesh ,seed-bed mesh andflower room mesh )
The Main Parameter:
Wire Diameter
1.8-3.5mm
Welding Aperture
50*50-150*150mm
Width Of Mesh
1200mm
Number Of Warp
25
Welding Speed
45(times/minute)
Rated Voltage
380V
Rated Electrical Power
220KVA
Overall Dimension
2.5*2.5*1.8M
Machine Weight
3.2 t
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
automatic steel wire mesh welding machine |
|
|
Function Characteristics:
This machine adopts electrical synchronous control technique, welding time and cent-control welding are composed of numeral and integrated electric circuit. This operation is accurate, it has stable function, firm welded point, and without welded tracks. Not only welded speed is fast, but also it is easy to learn and use .The machine equipped with precise equipment for cutting weft and fixing place (Two kinds of inventions have won nation patent), so the length of wefts is identical and regular, it is unnecessary to slice the side.
Use Of The Product:
1.Enclosure mesh and building roof mesh.
2.Building(reinforcing construction mesh, floor warming mesh ,seed-bed mesh andflower room mesh)
The Main Parameter：
Wire Diameter
1.3-2.5mm
Welding Aperture 50*50-150*150mm
Width Of Mesh 1200mm
Number Of Warp 25
Welding Speed 45(times/minute)
Rated Voltage 380V
Rated Electrical Power 75KVA
Overall Dimension 2.5*2.5*1.5m
Machine Weight 2.8 t |
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
laser marking system |
|
|
| CO2 laser marking system, YAG laser marking system |
|
» Posted by: Sintec Optronics Pte Ltd [Singapore]  |
|
|
|
|
|
[Sell]
laser lamp |
|
|
| laser lamp, arc lamp, flashlamp, Ke lamp, Xe lamp |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
mirror and lens |
|
|
| Supply all laser optics such as mirror, output coupler, focusing lens, scan lens, f-theta lens, beam expander |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
Green laser pointer |
|
|
| Supply green laser pointer |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
CO2 laser |
|
|
| Supply air- and water-cooled RF-excited CO2 lasers. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
laser power supply |
|
|
| Supply CW and pulse laser power supply. They are used to driver Kr arc lamp and Xe flashlamps. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
Q-switch and RF driver |
|
|
| Supply AO and EO Q-switches and their drivers. The acousto-optical Q-switch often used in the laser marking makes use of mutual interaction between an ultrasonic wave and a light beam in a scattering medium. The light beam that enters in a direction forming a Bragg angle to the wave surface of the acoustic wave in the scattering medium is diffracted in accordance with periodic changes in the diffraction rate produced by the acoustic wave. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
laser marking head |
|
|
| A laser marking head consists of two scan mirrors, two galvanometers (or called galvo-scanner motor) & drive cards, two cables, a XY mount, a scanning lens (f-theta lens), an interface card and a set of marking software. Two types of scanning optics for CO2 and Nd:YAG lasers are available. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
laser pump chamber |
|
|
| Laser pump chamber is used in solid-state lasers. Single or dual lamp high-efficiency laser pump chambers can accommodate laser rods of 3 to 10mm in diameter and up to 180mm in length. There are gold-coated chambers and ceramic pump chambers. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
Laser marking system |
|
|
| Supply CO2 and YAG laser marking systems. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
supply lasers and laser components |
|
|
| specialized in laser, optics & laser part - Nd:YAG laser, CO2 laser, mirror, output coupler, scanning lens (f-theta lens), focusing lens, beam expander, mirror mount, AOM, galvanometer, Q-switch & driver, chiller, pump chamber, ceramic reflector, stage, flashlamp, arc lamp, laser power supply, Nd:YAG rod, energy/power meter, laser diode, red diode, green laser pointer, laser safety goggles, CNC control software, laser marking head & software & D/A card, fiber, UV glass filter. |
|
| » Posted by: Sintec Optronics Pte Ltd [Singapore] |
|
|
|
|
|
[Sell]
wire straightening and cutting machine |
|
|
Features
1.These Machines are designed for straightening-measure-cutting any kinds of metal wire/bar or non - metal wire/bar such as, steel bar for construction, welding rods, netting - wire, fan netting hanger, refrigerator netting, shopping basket, shoes rack, book stand, domestic fowls cage, record stand and the other kinds of steel wire etc.
2. These machines are easy to operate. You just fix the adjuster of the desired length, and feed the wire/bar into the machine, then the machine automatically produce straight wire/bar of uniformed length at a high speed. Moreover, it rotates smoothly and noiselessly, precise in its measure and strong in its structure.
3. During the operation, the feeding of wire/bar and the cutting action are ceaselessly continued by the shifting of a cutter cooperatively.
Specifications:
Model JSC-1 JSC-2 JSC-3 JSC-4
Wire diameter (mm ) 1.5~3.5 3~6 5~8 7~12
Length of wire (mm) 40-4000 40-4000 40-4000 40-4000
speed (m/mine) 40 40 40 40
Motor (HP) 1+1/2 1+2 10 2+20
Remark:We can accept customer's special requirements
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
electric welding net machine |
|
|
AHD4T Type Electric Welding Net Machine
Size of mesh (mm) 6.35-12.7 (1/4"-1/2")
Width (mm) 914.4-1219.2(36"-48")
Diameter of wire (mm) dia.0.45-dia.1.07 (BWG25-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 75 (radia)
Power 380/220V, 50-60HZ, 50KWA x 4
Outside size measurement (mm) 2350 x 1820 x 1700
AHD6T Type Electric Welding Net Machine
Peculiarity: Shuttle sending weft wire type, sending quicker, lower noise, more stable, save electricity.Used for welding net of big width. Wire diameter from 0.7mm to 1.07mm; mesh 1/4" to 1/2".
Size of mesh (mm) 6.35-12.7 (1/4"-1/2")
Width (mm) 1219.2-1828.8(48"-60")
Diameter of wire (mm) dia.0.74-dia.1.07 (BWG22-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 48 (radia)
Power 380/220V, 50-60HZ, 50KWA x 6
Outside size measurement (mm) 3050 x 1900 x 1750
AHK4 Type Electric Welding Net Machine
Peculiarity: Box-style support, high stability, lower noise, E-machine in one, straighten and send wire automatically, used for welded wire mesh 1/2" to 4".
Size of mesh (mm) 12.7-101.6 (1/2"-4")
Width (mm) 914.4-1219.2(12"-48")
Diameter of wire (mm) dia.0.63-dia.2(BWG25-BWG19)
Biggest rolled net size (m) 120m (400')
Welding speed (mesh/minute) 65 (radia)
Power 380/220V, 50-60HZ, 50KWA x 4
Outside size measurement (mm) 2600 x 1700 x 1350
AHK6T Type Electric Welding Net Machine
Peculiarity: Box-style support, high stability, lower noise, E-machine in one, straighten and send wire automatically, used for welded wire mesh of big width and wire diameter.
Size of mesh (mm) 25.4-152.4 (1"-6")
Width (mm) 1219.2 1524 1828.8(48" 60" 72")
Diameter of wire (mm) dia.1.07-dia.2 (BWG19-BWG14)
Biggest rolled net size (m) 91.4m (300')
Welding speed (mesh/minute) 45 (radia)
Power 380/220V, 50-60HZ, 50KWA x 6
Outside size measurement (mm) 3350 x 1800 x 1400
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
automatic fence mesh welding machine |
|
|
Description:
1. Spot Welding System
Adjusting the electrodes,and fixture based on the wire pitch.Possible individually set welding time and current.
2. Wire Auto System
The line and cross wires are rhythmically welded as desired.The speed of welding is controlled through the control panel.
3. Controlling System
Equipped with man-machine interface windows based for the use of PLC,all the parameters and figures set on the screen.Easy for operators running and maintenance.
Application:
The fence mesh welding machine is to weld fence mesh used in highway, freeway, and residense for protection.
Specifications.
Wire Diameter 3-5mm Rated Voltage 380V
Mesh Opening 50*50-300*300mm Rated Electrical Power 400KVA
Width 2000mm 2500mm Welding Speed 30 times/minute
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
industrial mesh welding machine |
|
|
Industrial mesh welding machine
Description:
1. Spot Welding System
Adjusting the electrodes,and fixture based on the wire pitch.Possible individually set welding time and current.
2. Wire Auto System
The line and cross wires are rhythmically welded as desired.The speed of welding is controlled through the control panel.
Application:
The wire mesh welding machine or the wire mesh welder is to weld & produce welded mesh used in constructional work, buildings, steel structure, wall structure, reinforced concrete road, retaining wall, protection slope, floor, floor boards, successive wall, tunnels, fence, etc.
Specifications:
Model Wire Diameter Mesh Opening Width Welding Speed Power
JWM-1 1.3-2.5mm 50*50-200*200mm 36’’ 48’’ 45times/minute 380V. 50HZ 3phase.
JWM-2 1.8-3.5MM 50*50-200*200mm 36’’ 48’’ 60’’ 45times/minute 380V. 50HZ 3phase.
JWM-3 3-4.5mm 50*50-200*200mm 72’’ 84’’ 30times/minute 380V. 50HZ 3phase
|
|
| » Posted by: Joy Wire Mesh Machine Co., Ltd [China] |
|
|
|
|
|
[Sell]
supply excavator SC220.7 |
|
|
We Shandong Changlin group is one of the biggest corporation of construction machinery in china. The product we would provide including Excavator SC220.7; Wheel Loader CL750A, ZL30F-1 , ZL 50G, CL750A, ZL30F-1; Road Roller RH126, RM206, RD120, RS126, RT1215, and RP260.
"High quality, good service, low price" is our logo.
We are a rapidly growing company. Having obtained the ISO9001 certificate, we has a provincial technical development center and 4 research institutes. With production and marketing net systems using CAD computer system, our company can produce 2,000 road rollers, 2,000 wheel loaders every year.
We provide high quality products with low price. Welcome to visit our website: www.changlingroup.com for more information of our company.
|
|
| » Posted by: Shandong Changlin Group [China] |
|
|
|
|
|
[Sell]
Used Oil Regeneration/oil restoration/oil recycling System(NSH GER ) |
|
|
(oil purifier,oil treatment,oil filtration,oil purification,oil recycling,oil reclamation, oil regeneration,oil restoration,oil filtering,oil filter,oil purifying,oil disposal,oil recovery,waste management,oil reconditioned,oil reconstituted,oil restituting,oil recuperation,oil resumingoil recuperation)
Ⅰ. Application
NSH GER gas engine oil System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Ⅱ. Edges of GER
 Design according to different customers’ needs.
 Purify blend oils.
 Low operation cost.
 Low maintenance and replacement expenses.
 High regeneration rate.
 Automatic reverse wash system will extend the lifetime of filters and improve the performance of the filters.
 High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
 Small size, light weight, low noise.
|
|
| » Posted by: SINO-NSH Oil Purifier&Oil Treatment Machine Co., Ltd [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
