|
|
|
|
|
|
|
[Sell]
Turbine Oil Filtration Hydraulic Oil Purifier Coolant Oil Treatment Lubrication Oil Recycling equipment |
 |
|
NSH TF Turbine Oil Purifier(oil separator, oil machine, oil cleaner, oil refinery, Oil Regeneration, Oil Purification, Oil filter, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation, oil separation)
Application
TF series oil filtration equipment is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contains large amount of water, vapor, impurities, sludge, dielectric and colloid.
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operated in good condition.
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil renewed.
Turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
Technical specifications
Item Unit
TF-30 TF-50 TF-100 TF-150 TF-200 TF-300
Flow Rate L/H
1800 3000 6000 9000 12000 18000
Heating Power Kw
18 24 45 60 90 108
Total Power Kw
21 28 50 66 98 118
Inlet(Outlet)Diameter Mm
DN20 DN25 DN32 DN40 DN50 DN65
Net Weight Kg
450 580 700 900 1000 1200
Size length Mm
1350 1400 1500 1500 1600 1800
width Mm
950 950 1000 1200 1350 1400
height Mm
1500 1600 1650 1800 1800 1850
Vacuum Range MPa -0.08 --- -0.096
Working Pressure MPa 0.3
Water Ratio PPm 100
Impurity size 5
Clearness NAS1638 6
Temperature Range 20 80
Demulsifying Value min 15
Power Supply V ~50Hz 380V or as needed
Working Noise dB 70 75
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
NSH Product Catalogue
Engine oil regeneration series
GER Used Gas engine oil regeneration system
Insulation Oil Series
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Purifier
VFD-A Double-Stage Vacuum Insulation Oil Automation Purifier
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Purifier
VFD-T Double-Stage Vacuum Insulation Oil Purifier with Tester
Turbine Oil series
TF Turbine Oil Purifier
TF-A Turbine Oil Automation Purifier
TF-R Turbine Oil Regeneration Purifier
Lubrication Oil series
LV Lubrication Oil Purifier
LV-A Lubrication Oil Automation Purifier
LV-R Lubrication Oil Regeneration Purifier
Flame-resistant Oil series
FV Flame-resistant Oil Purifier
FV-A Flame-resistant Oil Automation Purifier
Explosion-proof series
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose
|
|
» Posted by: Sino-nsh oil purifier manufacture co.,ltd [China]  |
|
|
|
|
|
[Sell]
Transformer Oil Purifier Insulation Oil Filter Oil Treatment Oil Processing |
|
|
Transformer Oil Purifier(oil recycling, oil refining, oil recycled, Oil cleaner, oil refinery ,oil separator, oil machine, Oil Regeneration, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation)
Application
VFD insulating oil purification series is mainly used to improve the properties of insulation oil. It can remove water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil filtration series is specialized in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Description
Model VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it adds ROOTS vacuum system, second stage of separating system to improve the effect of purification, to remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
Technical Specifications
ItemUnit
VFD-30,VFD-50,VFD-70 ,VFD-100,VFD-150,VFD-200VFD300
Flow Rate L/H
1800,3000, 4500, 6000, 9000,12000, 18000
Heating Power Kw
30 , 48, 72, 90 , 120 , 180 , 240
Total Power Kw
33 , 52, 77, 96 , 128 , 188 , 252
Inlet(Outlet)DiameterMm
DN25, DN25,DN32,DN32,DN40,DN50,DN65
Net Weight Kg
900, 1000, 1100, 1400, 1800, 2100, 2400
Size length Mm
1500, 1600, 1700, 1800, 2200, 2300,2400
width Mm
1100, 1300, 1400, 1500, 1700, 1800, 1900
height Mm
1950, 2000,2050, 2050, 2100, 2250, 2250
Vacuum Range MPa -0.092 --- -0.099
Max Vacuum Range Pa 50
Working Pressure MPa 0.2
Temperature Range 20--80
Water Content PPm 4
Gas Content % 0.1
Breakdown Voltage Kv 75
Power Supply V ~50Hz 380V or as needed
Working Noise dB 72 78
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Motor Oil Treatment Lube Oil Refinery Oil Separator Oil Regeneration filter |
|
|
Engine Oil Regeneration System(Used Oil Purifier, oil filtration, oil separator, , Oil filter, oil cleaner, oil refining, oil recycled, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil purifier, oil reconditioned, oil reconstituted, oil remediation, oil reactivation, energy saving, waste oil management, oil machine, oil recuperate)
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
Test report of treatment of used CC40 diesel engine oil
Item Unit Theory index Treated oil index
flow viscosity 100 2/s 12.5-16.3 11.6
Flash point 220 232
Acid mgkoH/g 2.0 0.04
Impurity % 0.01 0.006
Water-solubility acid or alkali / no
viscosity index 80 91
Pour point -10 -26
Sulfate ash / 0.172
Technical Specifications
Item Unit
GER-1,GER-2,GER-3,GER-4,GER-5
CapacityL/8 -10hrs 2000,4000,6000,8000,10000
Weight kg
2000,3000,4500, 6500,6700
Regeneration Rate 70-90
Working Pressure MPa -0.095-0.4
Temperature 60-200
Working Noise dB 90
Inlet/Outlet Pipe Diameter Mm 42
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
NSH Product Catalogue
Engine oil regeneration series
GER Used Gas engine oil regeneration system
Insulation Oil Series
VFD Double-Stage High-Efficiency Vacuum Insulation Oil Purifier
VFD-A Double-Stage Vacuum Insulation Oil Automation Purifier
VFD-R Double-Stage Vacuum Insulation Oil Regeneration Purifier
VFD-T Double-Stage Vacuum Insulation Oil Purifier with Tester
Turbine Oil series
TF Turbine Oil Purifier
TF-A Turbine Oil Automation Purifier
TF-R Turbine Oil Regeneration Purifier
Lubrication Oil series
LV Lubrication Oil Purifier
LV-A Lubrication Oil Automation Purifier
LV-R Lubrication Oil Regeneration Purifier
Flame-resistant Oil series
FV Flame-resistant Oil Purifier
FV-A Flame-resistant Oil Automation Purifier
Explosion-proof series
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
waste engine oil recycling oil disposal oil recovery oil processor |
|
|
Engine Oil Regeneration System(Used Oil Purifier, oil filtration, oil separator, Oil filter, oil cleaner, oil refining, oil recycled, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil purifier, oil reconditioned, oil reconstituted, oil remediation, oil reactivation, energy saving, waste oil management, oil machine, oil recuperate)
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
Test report of treatment of used CC40 diesel engine oil
Item Unit Theory index Treated oil index
flow viscosity 100 2/s 12.5-16.3 11.6
Flash point 220 232
Acid mgkoH/g 2.0 0.04
Impurity % 0.01 0.006
Water-solubility acid or alkali / no
viscosity index 80 91
Pour point -10 -26
Sulfate ash / 0.172
Technical Specifications
Item Unit
GER-1, GER-2, GER-3, GER-4, GER-5
CapacityL/8 -10hrs 2000, 4000, 6000, 8000, 10000
Weight kg
2000, 3000, 4500, 6500, 6700
Regeneration Rate 70-90
Working Pressure MPa -0.095-0.4
Temperature 60-200
Working Noise dB 90
Inlet/Outlet Pipe Diameter Mm 42 |
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Transformer Oil Treatment Insulation Oil Recovery Oil Recycling Equipment |
|
|
Transformer Oil Purifier(oil recycling, oil refining, oil recycled, Oil cleaner, oil refinery ,oil separator, oil machine, Oil Regeneration, Oil Purification, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation)
Application
VFD insulating oil purification series is mainly used to improve the properties of insulation oil. It can remove water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. VFD oil filtration series is specialized in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Description
Model VFD series utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. Comparing to Model VF series, it adds ROOTS vacuum system, second stage of separating system to improve the effect of purification, to remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
Technical Specifications
ItemUnit
VFD-30,VFD-50,VFD-70 ,VFD-100,VFD-150,VFD-200VFD300
Flow Rate L/H
1800,3000, 4500, 6000, 9000,12000, 18000
Heating Power Kw
30 , 48, 72, 90 , 120 , 180 , 240
Total Power Kw
33 , 52, 77, 96 , 128 , 188 , 252
Inlet(Outlet)DiameterMm
DN25, DN25,DN32,DN32,DN40,DN50,DN65
Net Weight Kg
900, 1000, 1100, 1400, 1800, 2100, 2400
Size length Mm
1500, 1600, 1700, 1800, 2200, 2300,2400
width Mm
1100, 1300, 1400, 1500, 1700, 1800, 1900
height Mm
1950, 2000,2050, 2050, 2100, 2250, 2250
Vacuum Range MPa -0.092 --- -0.099
Max Vacuum Range Pa 50
Working Pressure MPa 0.2
Temperature Range 20--80
Water Content PPm 4
Gas Content % 0.1
Breakdown Voltage Kv 75
Power Supply V ~50Hz 380V or as needed
Working Noise dB 72 78
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Turbine Oil Filtration Oil Purifier Oil Treatment Oil Recycling |
|
|
NSH TF Turbine Oil Purifier(oil separator, oil machine, oil cleaner, oil refinery, Oil Regeneration, Oil Purification, Oil filter, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation, oil separation)
Application
TF series oil filtration equipment is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contains large amount of water, vapor, impurities, sludge, dielectric and colloid.
It can eliminate them effectively and efficiently. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operated in good condition.
Description
TF turbine oil purifier series is developed by vacuum evaporation technology, coacervation technology, coalescing technology, separating engineering technology and refined purification technology. It can eliminate water, gas, impurities, colloid, dielectric etc. rapidly and effectively in high vacuum situation and make the waste oil renewed.
Turbine or other equipments which has lubrication system need be replaced frequently because of vapor, water and other impurities mixed with it. Otherwise, oil deterioration would result in breakdown of machinery or affect the normal running of machinery.
TF series can effectively extend the lifetime of oil and protect turbine and other machinery which has lubrication system from damage.
Technical specifications
Item Unit
TF-30 TF-50 TF-100 TF-150 TF-200 TF-300
Flow Rate L/H
1800 3000 6000 9000 12000 18000
Heating Power Kw
18 24 45 60 90 108
Total Power Kw
21 28 50 66 98 118
Inlet(Outlet)Diameter Mm
DN20 DN25 DN32 DN40 DN50 DN65
Net Weight Kg
450 580 700 900 1000 1200
Size length Mm
1350 1400 1500 1500 1600 1800
width Mm
950 950 1000 1200 1350 1400
height Mm
1500 1600 1650 1800 1800 1850
Vacuum Range MPa -0.08 --- -0.096
Working Pressure MPa 0.3
Water Ratio PPm 100
Impurity size 5
Clearness NAS1638 6
Temperature Range 20 80
Demulsifying Value min 15
Power Supply V ~50Hz 380V or as needed
Working Noise dB 70 75
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Industrial Lube Oil Processing Oil Disposal Oil Refining Machine |
|
|
LV Lubrication Oil Purifier (oil separator, oil machine, oil cleaner, oil refine, Oil Regeneration, Oil Purification, Oil filter, Oil purify, Oil Recovery, Oil Processing, Oil Filtering, Oil Filtration, Oil Treatment, Oil Recycling, Oil Restoration, Oil disposal, Oil Reclamation, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil remediation, oil reactivation)
Application
LV series oil recycling system is suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. LV series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
Features
Perfect capacity of removing impurities. The special filters of NSH are made of special materials which can eliminate various impurities, water and gas effectively and rapidly.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Online work
Easy handling and maintenance.
Lower maintenance and replacement expenses
Small size, light weight, low noise
Available to mobile or stationary options.
Various sizes and configurations (shield) available.
Technical Specifications
Item Unit
LV-30,LV-50,LV-100,LV-150,LV-200 LV-300
Flow Rate L/H
1800, 3000, 6000, 9000, 12000, 18000
Heating Power Kw
36, 60 , 72, 90 , 120, 135
Total Power Kw
39, 64 , 78,98, 128, 145
Inlet (Outlet) DiameterMm
DN20 DN25 DN32 DN40 DN50 DN65
Net Weight Kg
500, 550 , 700, 850, 1000, 1250
Size length Mm
1500, 1600, 1750, 1900, 1950, 2100
Width Mm
1050, 1150, 1150, 1600, 1600, 1600
height Mm
1650,1700, 1750, 1950, 1950, 2000
Vacuum Range MPa -0.08--- -0.096
Working Pressure MPa 0.3
Water Ratio PPm 100
Impurity size 5
Clearness NAS 5
Temperature Range 20-80
Power Supply V ~50Hz 380V or as needed
Working Noise dB 70 75
There are other types of this series depend on your need. If you interested them, please give me a message with your e-mail and other details.
We will deal with all your questions professionally.
|
|
| » Posted by: Sino-nsh oil purifier manufacture co.,ltd [China] |
|
|
|
|
|
[Sell]
Q69 Steel Profiles Shot Blasting Machine |
|
|
| The series of Q69 steel sheet shot blasting pre-treament line are mainly consist of warm-up, shot blasting and spray painting and drying process.It applies to shipping, car, motorcycle,bridge, machine ect which is in the line of steel board, section and structure casting to wipe of surface rusting and paiting art. |
|
| » Posted by: Kaitai Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
Q37 Overhead Rail Spinner Hanger Machine |
|
|
| This series for the hook type shot blasting cleaning machine, is mainly used for casting. structural, non-ferrcus alloy parts and other parts of the surface cleaning, shot blasting cleaning machine of this series at a single hook, double hook-type, lifting and not. lifting style and many other models. It has the advantages of no pit, compact structure, and high productivity. |
|
| » Posted by: Kaitai Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
(y-015) punching parts/metal punching parts/sheet punching parts |
|
|
(y-015) punching parts/metal punching parts/sheet punching parts
Place of origin: Qingdao, China
1) We specialize in punching parts ,punching die, sheet metal moulds, including the progressive mould. We had export some progressive moulds to Japan, Italy, Iran.
2)The punching parts are related to home appliance, auto parts, electronic products, and so on.
3)ISO9001:2000 certified by SGS.
Mould material: SKD11,SKD61, Cr12Mov,1Cr18Ni9Ti, V10, and so on.
We accept the following file types of inquiry:
Pro/E Solidworks UG AutoCAD Adobe Acrobat
.dxf .pdf .x_t .stp .igs .prt
We have confidence in cooperating with you !
China punching|punching die|punching parts|sheet metal parts|punching parts|stainless parts|metal parts|progressive die|plain die|forming die|pierce die|stage die|riverting die|shearing die|gang dies
|
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
(y-016) washing machine mould/washing machine moldiing part/washing machine part |
|
|
| (y-016) washing machine mould/washing machine moldiing part/washing machine part |
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Q32 Tumble Belt Type machine |
|
|
| This series is used for surface cleaning,rust romoving,and surface intensification of each kind of middle and small scale casting, forging and job. It is suitable for diffenent production scale, can be stand-alone use and many units can also be used in conjunction wi th the continuous conveyor components, composing the production of clean-up lines. |
|
| » Posted by: Kaitai Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
(y-001) auto parts/auto molding part/auto molded part |
|
|
(y-001) auto parts/auto molding part/auto molded part
Supply various moulds for auto parts , also every plastic parts for automobile.Provide the moulds and injection molding.
1)Specialize in plastic injection moulds and injection molding for auto parts with rich experience.
2)We have produced almost every parts of automobile,such as airfilter,waterchamber,bumper,drawer,doorknob,steering wheel and so on.
3)Track the process, with 6 working days every week, and CNC, EDM 24 hours working everyday. So we can guarantee the lead time.
4)We have made auto parts for Chrysler, Ford, GM, Honda, Nissan, Toyota and so on .
Mould material: NAK80, 1.2738, P20, 2344, and so on.
Mouldbase: LKM, HASCO, and so on.
Mould hot runner: HASCO, YUDO, EWIKON
We accept the following file types of inquiry:
Pro/E Solidworks UG AutoCAD Adobe Acrobat
.dxf .pdf .x_t .stp .igs .prt
|
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
(y-003) air conditioner mould/air conditioner molding part/sir conditioner part |
|
|
(y-003) air conditioner mould/air conditioner molding part/sir conditioner part
1)Rich experience in air conditioner mould and it's accessories, such as mould for air conditioner windshield,beancurd sheets,panel,framework,encloser,filter screen,air conditioner case and so on.
2)Our moulds are high quality by made with well-equipped like sophisticated production and
inspection facilities, and well-trained & skillful professionals who also are expert in hot
runner and gas-aided technologies. What's more, our price is very reasonable and delivery
punctual, all these won us universal recognization among the customers.
3)We are looking forward to getting a long term close cooperation with you basis on mutual benefit. If you want to know more details or have any question, do please feel free to let me know.
Mould material: NAK80, 1.2738, P20, 2344, and so on.
Mouldbase: LKM, HASCO, and so on.
Mould hot runner: HASCO, YUDO, EWIKON
We accept the following file types of inquiry:
Pro/E Solidworks UG AutoCAD Adobe Acrobat
.dxf .pdf .x_t .stp .igs .prt
|
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
(y-008) plastic injection mould/injection mould part/injection moulded part |
|
|
(y-008) plastic injection mould/injection mould part/injection moulded part
1)Supply moulds to international market. We have our own mould dept. and injection molding dept., so we can provide the plastic injection moulds and the plastic parts.
2)Mould material: NAK80, 738,738H, SKD61, P20, 718, 718H,and so on.
Plastic Material: ABS, PP, PC, PVC, HDPE,PE, LDPE, PU, PMMA, PA66+GFand so on.
Mould base:LKM, HASCO,and so on.
Mould hot runner: HASCO, YUDO, EWIKON
All native files and IGES,DXF,STEP,STL, etc. files can be received.
3)The products are related to home appliance, automobile, electronic products, articles of everyday, medical devices, health care proudcts, etc.
4)Have the injection molding dept. which can make us guarrantee the mould trial and the batch production of the plastic parts.
5)ISO9001:2000 certified by SGS.
|
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
(y-006) plastic injection tooling/injection tooling part/plastic tooling part |
|
|
(y-006) plastic injection tooling/injection tooling part/plastic tooling part
1)Supply toolings to international market. We have our own mould dept. and injection molding dept., so we can provide the plastic injection toolings and the plastic parts.
2)Mould material: NAK80, 738,738H, SKD61, P20, 718, 718H,and so on.
Plastic Material: ABS, PP, PC, PVC, HDPE,PE, LDPE, PU, PMMA, PA66+GFand so on.
Mould base:LKM, HASCO,and so on.
Mould hot runner: HASCO, YUDO, EWIKON
All native files and IGES,DXF,STEP,STL, etc. files can be received.
3)The toolings and products are related to home appliance, automobile, electronic products, articles of everyday, medical devices, health care proudcts, etc.
4)Have the injection molding dept. which can make us guarantee the mould trial and the batch production of the plastic parts.
5)ISO9001:2000 certified by SGS.
|
|
| » Posted by: Higrade(Qingdao) Moulds & Products Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Security Mesh |
|
|
Security Mesh
Perforated stainless steel mesh provides an impenetrable barrier for the doors. The perforated holes bring the effect of a slightly tinted window view and complete security.
Stainless Steel Security Mesh is used where further security for the door is needed, or where the door design is of a more open pattern.
Perforated patterns for the security mesh: Round, diamond, cross, slotted or decorative openings.
Materials: Stainless steel 304, or stainless steel 316.
Perforated metal mesh thickness: Can be custom made to meet specific requirements.
Metal mesh length and width: According the door size requirements.
Different perforated metal applications in different countries with different customers require different solutions. Flexibility is therefore the key to our success.
There are abundant choices of patterns and hole sizes. The manufacturing capabilities include a vast array of materials – perforated aluminum, perforated stainless steel, brass, titanium, and others. Parts in coil, sheets or as completely fabricated parts can be supplied.
Material thickness:
Thinner materials typically perforate easier and faster, and are often less expensive. The right material thickness provides sufficient strength to the product while allowing the perforating of the desired hole size.
Hole size:
In general it is advisable to use a hole size larger than the metal thickness. The closer the hole size and material thickness come to a 1 to 1 ratio, the more difficult and expensive the process is. Dependent on the material type, smaller hole size to material ratios can be achieved. Contact your Sales Representative to discuss your special requirements.
Hole shape and pattern of the security mesh:
It is more economical to choose one of the available patterns, although special hole sizes and patterns can be accommodated at additional cost.
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Security Mesh.
|
|
| » Posted by: Wire Mesh International [China] |
|
|
|
|
|
[Sell]
Expanded Mesh |
|
|
Expanded Mesh
Expanded metal can be used in many metal works and it is determined from the following terms:
1. Strand: Form the sides of the expanded metal design opening
2. Bond: Where the strands intersect
3. SWD: Short Way of the Design – is the distance from the middle of the bond on one side to the middle of the bond on the opposite side.
4. LWD: Long Way of the Design – is the distance across the largest dimension measured at the center.
5. SWO: Short Way of the Opening – is the width of the opening of the shortest side of the design. SWO does not include the strand width.
6. LWO: Long Way of the Opening – is the length of the opening of the longest side of the design. LWO does not include the strand width.
7. Open Area: The total area of the design openings divided by the total area of the sheet or roll of expanded metal and is expressed as a percent.
Expanded Metal for Metal Works:
Woven wire and welded wire can be used for processing of metal works, while expanded metal mesh has its own benefits of using.
Expanded mesh can be fabricated into the designs you want to create a feel or a sense of volume in the space by using expanded metal panels as accent borders, clouds or full ceilings. Expanded mesh is simple and safe for installation.
Expanded mesh can be supplied in many metal materials such as stainless steel, aluminum, nickel, titanium, while carbon steel is one of the most important materials for using. Galvanized carbon steel expanded mesh offers good property against corrosion and rust at economic price
Patterns applied include diamond, square, hexagonal and heavy type.
The panel surface of expanded mesh can be flattened.
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Expanded Metal Mesh.
|
|
| » Posted by: Wire Mesh International [China] |
|
|
|
|
|
[Sell]
Barbed Tape |
|
|
Barbed Tape
Barbed tape makes firm obstacles against intrusions for sites and places where protection is needed. With strong barbs or razor blades, it offers good fencing at low cost. Barbed tape wire is popularly used in general fencing, military uses and site security.
Mechanical Properties:
? Spacing between the barb: 4 "and 5".
? Barbed wire of 0, 2 and 4 points.
? Resistance to the breakdown: 436 kg.
Barbed tape wire is supplied in rolls or packages of 28, 30 and 34 kgs. In 2 and 4 points.
Application:
To narrow perimeter and / or internally land, ranches, livestock, pasture, fences protection on the roads, highways.
Barbed Tape Benefits:
? Galvanized brilliant.
? Sharp
? Low cost
? Easy to install
Galvanized wire for making of barbed tape is zinc coated and offers good strength and corrosion resistance. Barbed wire can also be pvc coated.
Twisting Forms for Barbed Tape can be single twisted, double twisted or traditional twisted.
Barbed tape is normally used together with chain link fence or other fencing fabrics to form a barrier system, used in protective fencing and demarcation of spaces agriculture, livestock, residential, fences, perimeter, cages, warehouses, parking lots, etc..
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Barbed Tapes.
|
|
| » Posted by: Wire Mesh International [China] |
|
|
|
|
|
[Sell]
Mosquito Screen |
|
|
Mosquito Screen
Mosquito screen is available in galvanized steel, fiberglass, stainless steel and aluminum.
The mesh screen is supplied in the form of 100 ft. Roll widths of mosquito screen: 3',4',5'& 6'
Mosquito mesh screen is light and easy to install.
Thanks to the mild steel wires, the mosquito screen is more resistant than aluminum and plastic screen.
The galvanized mesh mosquito screen has a high tolerance to heat and fire, in contrast to the plastic.
Aluminum Mosquito Screen:
Aluminum screen is tough and precision woven according to international standard. Finishing of aluminum screen further adds stability, strength, additional protection against corrosion.
Specifications:
Available Widths: 2ft.,3ft,4ft, & 5ft.
Lengths: 100 feet
Colours: Charcoal & bright aluminum.
Fiberglass Screen against Mosquito:
Made of vinyl coated fiberglass yarn, fiberglass screen is strong, long lasting and is not easily damaged.
Fiberglass is woven from permanent glass yarn, which has been coated with a protective vinyl to ensure lasting beauty, colour & flexibility. It is produced under the most exacting conditions to meet extremely rigid specifications.
Features: Fiberglass screen is non-combustible & will not rust, corrode or stain.
Specifications :
Mesh: 18X16 nominal mesh count
Colors: Charcoal and Silver grey
Lengths: 100 feet rolls
Widths: 3',4',5' & 6'
Reinforced Galvanized Screen:
Galvanized steel screen offers more protection, safety and resistance than other materials.
It serves longer and resists fire. Compared with plastic mosquito screen, galvanized window screen has resistance to deformation and will remain tense for a longer time.
Send Email or Fill in the Feedback Form on this Page to Get Professional Services and Quick Responses from WireMesh.Org Members engaged in Mosquito Screen.
|
|
| » Posted by: Wire Mesh International [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
