|
|
|
|
|
|
|
[Sell]
china auger teeth manufacturer |
 |
|
| Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 48-52HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working.The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed. |
|
» Posted by: Changzhou Prance Machinery Co., Ltd. [China]  |
|
|
|
|
|
[Sell]
New type magnetic separator |
|
|
http://www.zcrusher.com/megnetic-separator.html
Application:
The Magnetic Separator can separate raw materials with different magnetic rigidities. The machine works under the magnetic force and machine force.
Magnetic Separators are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications. The heart of each separator is the magnetic system with its unique design, which has a proven record of high efficiency.
The Magnetic Separators are available in cyclic design with process vessel diameters smaller than 3mm. Magnetic Separator is one kind of efficient equipment for processing fine, feebly magnetic minerals, such as hematite, limonite, wolfram, ilmenite, and tantalum-niobium, etc. In recent years, it is also more and more applied in purifying quartz, feldspar and nephline. Its magnetic system is a ring-shape chain closed magnetic circuit with energizing coils made of copper tube and cooled internally by water. Grooved plates made of magnetic conductive stainless steel are used as magnetic matrix.
Advantages:
1)Short magnetic circuit,
2) little magnetic flux leakage
3) high magnetic intensity
4) low energy consumption
5) fine beneficiating results
6)simple structure and easy to maintain. |
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Floatation machine |
|
|
http://www.zcrusher.com/flotation-machine.html
This type of Floatation machine is formed by U through solid, hollow shaft inflation, suspension rotor and new type impeller. The cone impeller lean backwards, the blending quantity is big and the pressure head is small, the advantages are: simple structure and low energy consumption. Inside the impeller, there is air distributor, which distributes air into most parts of impeller evenly.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Sand making production line |
|
|
http://www.zcrusher.com/sand-production-line.html
Sand production line:
The sand-making production line produced by our company can provide you with all-around technical support. The whole line consists of vibrating feeder, jaw crusher, Vertical Shaft Impact Crusher, vibrating screen and belt conveyor. According to specific requirements, we can combine different models together to meet various needs.
1. Brief introduction of the sand-making production line:
The raw materials are first put into elementary-crushing machine for crush, then the belt conveyor transfers the elementary products to the secondary-crushing machine for secondary crush. The secondary products will be separated into two kinds by the vibrating screen. The parts satisfying the standard of the Vertical Shaft Impact Crusher will be conveyed to the sand-making machine and the other parts will return to the secondary-crushing machine. The parts into the sand-making machine will be the finished products after being washed in the sand-washing machine. The other parts will be for the secondary crush.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Cone Crusher |
|
|
http://www.zcrusher.com/cone-crusher.html
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make surereliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing. According to stave work need of Cone crusher,cone crusher is maily usely in the compressive strength not surpassing 300Mpa each kind of ore and rock to medium crush and in broken bits .this is a typical equipment of our country for crushing hard ore to medium crush and broken bits.it is widely applied.it has the charaterisrics of high reduction ratio, high output,,few powder lost, the product granularity even, strong compatibility of hard grain.
Principle of Cone Crusher:
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are drived by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is drived by motor through v-belts.The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the diacharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequantly the output size is determined.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
We are a manufacturer of EDM filter. |
|
|
| We are a manufacturer of EDM filter and other consumables supplier from China.We would like to establish business relationship with your company. |
|
| » Posted by: Foshan Nanhai Guanxin Mechanical Filter Core Factory [China] |
|
|
|
|
|
[Sell]
china round shank tooth supplier |
|
|
| Alloy steel Body, made by material ASTM4142 or 42CrMo,heat treatment with 40-44HRC hardness, has high toughness and wearable character.Tip with above 50 HRC hardness is made from Low press Sintered,and Suitable Grade Selected according to the Target Projects,Which are to make sure the good performance during working. The products adapt to the machine with all the performance features such as a high feed rate,a long service life and short tool changing times.Together with the parts supply assurance,a high daily production volume, and above-average economy is guaranteed. The complete tools apply for foundation creation,solid wall,water well drilling,trenching,mining,tunnelling. |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
supply grinding media for mining |
|
|
Grinding media,grinding steel ball,Forged steel balls,steel ball,grinding ball,grinding media,mill ball
Diameter:20mm-150mm
Hardness: HRC55-65
Features: High and steady hardness,no breakage,good wear resistance and even good wearing. |
|
| » Posted by: Shandong Huamin Steel Ball Co.ltd. [China] |
|
|
|
|
|
[Sell]
Hammer Crusher |
|
|
http://www.zcrusher.com/hammer-crusher.html
The hammer crusher also named hammer mill, it crushes by the collisions between high-speed hammer and materials, has features of simple structure, high reduction ration, high efficiency, etc. The PC was developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess.
The hammer crusher(hammer mill) crushes by the collisions between high-speed hammer and materiasl,and the hammer crusher(hammer mill) features are in its simple structure, high reduction ration, high efficiency, etc. The PC hammer crusher(hammer mill) were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
Operating principle of Hammer Crusher:
In the hammer mill machine, the motor drives the rotor rotate at a high speed through the belt, and on the rotor there are series hammers. When the materials get into the working area of hammers, the rotating hammers with high rotation speed are crushing them, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, the large size products are brought back to the crushing area by the hammers for being re-crushed until they reached the required size.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Double Roll Crusher |
|
|
http://www.zcrusher.com/double-roll-crusher.html
Roll Crushers are compression type crushers, and were once widely used in mining. They have, within the last 10 or so years, fallen into dis-favor among mining and processing companies. The probable reason is because the large mines require very large crushed product output with minimal cost, makes the roll crusher uncompetitive. The roll crushers are not nearly as productive as cone crushers, with respect to volume, and they do have a little higher maintenance associated with them. Roll crushers do, however, give a very close product size distribution, and if the ore is not too abrasive, they do not have high maintenance costs. Roll crusher is mainly used for the crushing of medium or lower-hardness mines and rocks with medium or lower rigidity in mine selection, chemicals, cement and building materials industrial production.
|
|
| » Posted by: Henan Fengde Machinery Manufacturing Co.,Ltd. [China] |
|
|
|
|
|
[Sell]
Lubrication Oil Purifier System |
|
|
LV series:
Lubrication Oil Filter System are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
sinonsh118 |
|
| » Posted by: NSH oil purifier and filter co. [China] |
|
|
|
|
|
[Sell]
[CN] Turbine oil filter plant |
|
|
TF series:
Turbine oil purifier system is particularly suitable for purifying turbine lubricating oil. It also applies to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently.
|
|
| » Posted by: NSH oil purifier and filter co. [China] |
|
|
|
|
|
[Sell]
Double stages Vacuum Insulation Oil Purifier |
|
|
It specialize in purifying branded oil, insulation oil of high voltage and super high voltage transformer.
Additionally, it is suitable for treating low viscosity lubrication oil.
We also provide products of different capacities: from 3000 to 18,000L per Hour. If you have further need please feel free contact us. |
|
| » Posted by: NSH oil purifier and filter co. [China] |
|
|
|
|
|
[Sell]
edm filter,edm wire,edm consumable,edm spare part, |
|
|
| We are a manufacturer of edm filter and other consumables supplier from China.We would like to eatablish business relationship with your company.Please contact us. |
|
| » Posted by: Foshan Nanhai Guanxin Mechanical Filter Core Factory [China] |
|
|
|
|
|
[Sell]
Electrically heated motorcycle clothing |
|
|
| 1, clothing has a power far-infrared heating function, with a comfortable temperature control. 2, using a wide range, suitable for famliy room, office, computer room, motorcycles for outdoor use, conwenient for your travel, warm your winter life. 3, can replace the air-conditioning heating, to energy-saving environmental protection to save money. 4, use the heating does not cause air dry clothes, warm up the real health outcomes. 5, electricity and warm clothing tothose who have health care for frail insulation effect on the rheumatic diseases helpful. 6, the unique micro-computer controller has the most, large, medium and small stalls to choose from four temperature through the LED display you can select the most suitable temperature range. 7, using large-capacity lithium battery, convenient for your outdoor use. The use of a single charge time (2-3 hours maximum sustainable use of stalls, big stalls lasting 3-4 hours, 4-5hours in a small stall continued 6-7 hours of continous use. ) 8, style and complete, suitable for consumers of all ages. |
|
| » Posted by: Foshan Lukang Machinery Manufacturer Co., Ltd. [China] |
|
|
|
|
|
[Sell]
high quality Holder |
|
|
| Place of origin Changzhou, China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material 8630 Port of loading Shanghai Packing Wooden case, Iron case or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks |
|
| » Posted by: Changzhou Prance Machinery Co., Ltd. [China] |
|
|
|
|
|
[Sell]
LG450-H cold rolling mill 1125 |
|
|
| LG450-H cold rolling mill Technical parameter of product 1.outer diameter of rough tube:250-480mm 2.wall thickness of rough tube:10-35mm 3.length of rough tube:less than 10000mm 4.outer diameter of finished products:219-450mm 5.wall thickness of finished products:6-28mm Technical parameter of machine 1.diameter of roller:1128/928mm 2.round trip length of operating frame:1208mm 3.round trip frequency of operating frame:20-50times/minute 4.feeding amount:2-12mm(single feeding) 5.swing angle of rough tube:41-52 degree(double turning) 6.material loading method:Side loading 7.continuous rolling:No 8.rolling lines:single 9.Power of main motor:DC motor 950KW |
|
| » Posted by: Kunshan Yongdeli Machinery Co.,Ltd [China] |
|
|
|
|
|
[Sell]
sell various Fertilizer machinery |
|
|
| Q.H.D Sannong Modern Mechanical Equipment Co.,Ltd is a high-tech manufacturer of bulk blending (BB) fertilizer equipments and ration packaging equipments. As the initiate of BB fertilizer concept and holder of numbers of national patents. Sannong is the leading corporation for product innovation and technology upgrading in the bulk blending (BB) fertilizer equipments industry in china from the day of its foundation. |
|
| » Posted by: Qinhaungdao Sannong Modern Mechnical Equipment Co., Ltd [China] |
|
|
|
|
|
[Sell]
supply jaw crusher |
|
|
http://www.zcrusher.com/jaw-crusher.html
Application of Jaw Crusher:
Jaw crusher is a trusted and reliable brand for its high quality and good manufacturing. It specializes in producing Jaw Crusher which is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200Mpa, that is, suitable for primary crush. Each model has a large feed opening for its size and an ideal nip angle, giving smooth material flow, high reduction efficiency and high capacity. Their simple design conceals many advanced features that give easy operation, simple maintenance, long life and a low cost per ton.
The structure of Jaw Crusher:
The structure of Jaw Crusher includes Main Frame, Main Axle, Roller Bearings, Eccentric Shaft, Jaw Plates, Side Plates, Toggle Mechanism, Fly Wheels and Springs.
The Features of Jaw Crusher:
1. Jaw Crusher is of various types;
2. Jaw Crusher is suitable for crushing maximum, medium and minimum stones;
3. The operating principle of Jaw Crusher is easy to be operated;
4. The structure of Jaw Crusher is simple and it is easy to maintain;
Operating principle:
Jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
[Sell]
Ball mill |
|
|
http://www.zcrusher.com/ball-mill.html
The ball mill is suitable in the powder rubs each kind of ore and other materials, the balll mill is widely used in the dressing, professions, building materials and chemical industry and so on. It is divided into two rubbing way-the dry and the wet .There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material. The ball mill is a key equipment to grind the crushed materials after the material were broken , and carrying on the smashing again. and the ball mill is widely used in powder-making production line including cement, silicate, new-type building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc,the ball mill carries on the dry type or the wet powder to each kind of ore and other grindability material rubs.
Working Principle:
The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.
Ball Mill Application:
The ball mill is a key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.
|
|
| » Posted by: Henan Fengde Beneficiation Division [China] |
|
|
|
|
|
«back
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 next»
|
|
|
